This is now possible, because the dump function has been added in kernel.
Note that IPv4 and IPv6 entries are displayed.
Before this patch, only all entries were displayed.
Example:
$ ip netconf
ipv4 dev lo forwarding on rp_filter off mc_forwarding 0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
ipv4 all forwarding on rp_filter off mc_forwarding 1
ipv4 default forwarding on rp_filter off mc_forwarding 0
ipv6 dev lo forwarding on mc_forwarding 0
ipv6 dev eth0 forwarding on mc_forwarding 0
ipv6 all forwarding on mc_forwarding 0
ipv6 default forwarding on mc_forwarding 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For the display part, we print extra-flags only if show_stats is set, like for
standard flags.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This change shifts burden onto the users to choose the UDP port value.
Kernel default value is incorrect UDP port 5287 but now there is
an official assigned port for VXLAN.
The kernel can't change because of legacy compatibility
but new deployments should not use the legacy port value.
This patch allows setting the "NTF_ROUTER" flag in VXLAN forwarding table
entries to enable L3 switching for router destinations while still allowing
L2 redirection appliances for non-router MAC destinations.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
ss -i can output "fastopen" attribute if socket used Fast Open
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute2 patch to generalize VXLAN forwarding tables
This is the iproute2 support allowing an administrator to specify alternate
ports, vnis and outgoing interfaces for VXLAN device forwarding tables.
Changes since v3: changed NDA_PORT to be 16-bit network byte order to match
changed byte-order/size in the VXLAN driver.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
Add ability to set UDP destination port on a per device basis.
If no port is assigned, the default IANA assigned port will be used.
If you want the kernel default value, then use port 0.
Source port range option is now called 'srcport', to avoid
confusion. The old option syntax is accepted for compatiablity.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for tokenized IIDs, that enable
administrators to assign well-known host-part addresses
to nodes whilst still obtaining global network prefix
from Router Advertisements. This is the iproute2 part for
the kernel patch f53adae4eae5 (``net: ipv6: add tokenized
interface identifier support'').
Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1
Getting a device token:
# ip token get dev eth1
token ::1a:2b:3c:4d dev eth1
Listing all tokens:
# ip token list (or: ip token)
token :: dev eth0
token ::1a:2b:3c:4d dev eth1
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Hello!
I'm attaching a patch [1] "Feed GCC 4.8.0 against new warning that is
shipped with -Wall: -Wsizeof-pointer-memaccess.".
More details: http://gcc.gnu.org/gcc-4.8/porting_to.html
Regards,
[1] 0001-Feed-GCC-4.8.0-against-new-warning-that-is-shipped-w.patch
>From 1f3ea01fe2ff61cbbca6474f7d9903a0756a4f44 Mon Sep 17 00:00:00 2001
From: Kamil Rytarowski <n54@gmx.com>
Date: Fri, 3 May 2013 18:43:38 +0200
Subject: [PATCH] Feed GCC 4.8.0 against new warning that is shipped with
-Wall: -Wsizeof-pointer-memaccess.
In trying to build on a RHEL6.3 I ran into several build issues that are
addressed in this patch.
The first is that xtables_merge_options only has 3 parameters. It appears
this is how this code was originally. As such for the case where the version
is less than 6 I am assuming it would be correct to maintain the original
setup that only had 3 parameters being passed instead of 4.
I also ran into an issue with the define for __ALIGN_KERNEL not being present.
I believe this may be due to the fact that __ALIGN_KERNEL was moved into a
separate header from ALIGN after the UAPI changes. In order to just cover all
of the bases I have moved the main definition for the macros into
__ALIGN_KERNEL_MASK and __ALIGN_KERNEL and if ALIGN is also needed then it is
just a direct redefine to __ALIGN_KERNEL.
Cc: Hasan Chowdhury <shemonc@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This change corrects a kernel incompatibility that was resulting in the
ext_filter_mask not being correctly discovered by the kernel as it is buried
somewhere in the ifinfomsg.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Be more careful about overflow in strtoXX routines.
Checks are based on documented interface on man pages.
Based on suggestion from "Mr Dash Four".
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The tc command is missing documentation of -batch and -force switches
that are returned by "tc -help".
Add short description on their syntax and usage.
Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).
List the algorithm names that currently exist in the kernel.
Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.
Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.
This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>
In older versions of traffic shaping the Alpha kernel was special
and had higher HZ. This no longer matters, TC is based on high
resoulution timers in kernel.
My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Bridge tool now supports setting and retrieving bridge port specific
link attributes. Document what attributes are supported and what
they mean.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Add netlink support bridge port attributes such as cost, priority, state
and flags. This also adds support for HW mode such as VEPA or VEB.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.
I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Nicolas Dichtel
Stephen Hemminger
David L Stevens
Eric Dumazet
Daniel Borkmann
Kamil Rytarowski
Alexander Duyck
Hubert Kario
Petr Sabata
David Ward
James Chapman
Thomas Egerer
Vlad Yasevich
roopa
Eric W. Biederman