matthias
/
iproute2
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

iproute2: Fix some manpage typos 

This patch fixes some of the typos found in iproute2
documentation.

Signed-off-by: Petr Šabata <contyk@redhat.com>
This commit is contained in:
Petr Sabata 2013-04-04 03:36:57 +00:00 committed by Stephen Hemminger
parent a6d55bf0a0
commit 6274b0b759
9 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
man/man8/arpd.8
View File

@ -26,7 +26,7 @@ Read and load an arpd database from FILE in a text format similar to that dumped
the location of the database file. The default location is /var/lib/arpd/arpd.db
.TP
-a <NUMBER>
With this option, arpd not only passively listens for ARP packets on the interface, but also sends brodcast queries itself. NUMBER is the number of such queries to make before a destination is considered dead. When arpd is started as kernel helper (i.e. with app_solicit enabled in sysctl or even with option -k) without this option and still did not learn enough information, you can observe 1 second gaps in service. Not fatal, but not good.
With this option, arpd not only passively listens for ARP packets on the interface, but also sends broadcast queries itself. NUMBER is the number of such queries to make before a destination is considered dead. When arpd is started as kernel helper (i.e. with app_solicit enabled in sysctl or even with option -k) without this option and still did not learn enough information, you can observe 1 second gaps in service. Not fatal, but not good.
.TP
-k
Suppress sending broadcast queries by the kernel. This option only makes sense together with option -a.

8
man/man8/bridge.8
View File

@ -178,7 +178,7 @@ adress tables.
.sp
.B 4
- STP BLOCKING state. Only valid if STP is eanbled on the bridge. This state
- STP BLOCKING state. Only valid if STP is enabled on the bridge. This state
is used during the STP election process. In this state, port will only process
STP BPDUs.
.sp
@ -198,7 +198,7 @@ traffic back out of the receiving port.
.TP
.BR "fastleave on " or " fastleave off "
This flag allows the bridge to immediately stop multicast traffic on a port
that recieves IGMP Leave message. It is only used with IGMP snooping is
that receives IGMP Leave message. It is only used with IGMP snooping is
enabled on the bridge. By default the flag is off.
.TP
@ -307,7 +307,7 @@ device is the bridge device.
.TP
.BI master
the vlan is configured on the sofware bridge (default).
the vlan is configured on the software bridge (default).
.SS bridge vlan delete - delete a forwarding database entry
This command removes an existing fdb entry.
@ -361,7 +361,7 @@ the bridge device is not part of the syntax. This is a limitation of the
underlying netlink neighbour message protocol. When displaying the
forwarding table, entries for all bridges are displayed.
Add/delete/modify commands determine the underlying bridge device
based on the bridge to which the coresponding ethernet device is attached.
based on the bridge to which the corresponding ethernet device is attached.
.SH SEE ALSO

4
man/man8/ip-l2tp.8
View File

@ -108,7 +108,7 @@ control protocol so no userspace daemon is required - tunnels are
manually created by issuing commands at a local system and at a remote
peer.
.PP
L2TPv3 is suitable for Layer-2 tunnelling. Static tunnels are useful
L2TPv3 is suitable for Layer-2 tunneling. Static tunnels are useful
to establish network links across IP networks when the tunnels are
fixed. L2TPv3 tunnels can carry data of more than one session. Each
session is identified by a session_id and its parent tunnel's
@ -366,7 +366,7 @@ site-B:# modprobe nf_degrag_ipv4
.fi
.PP
If L2TP is being used over IPv6, use the IPv6 degrag module.
.SH INTEROPABILITY
.SH INTEROPERABILITY
.PP
Unmanaged (static) L2TPv3 tunnels are supported by some network
equipment equipment vendors such as Cisco.

2
man/man8/ip-link.8.in
View File

@ -212,7 +212,7 @@ specifies the physical device to act operate on.
.TP
.BI dev " DEVICE "
.I DEVICE
specifies network device to operate on. When configuring SR-IOV Virtual Fuction
specifies network device to operate on. When configuring SR-IOV Virtual Function
(VF) devices, this keyword should specify the associated Physical Function (PF)
device.

4
man/man8/ip-tunnel.8
View File

@ -84,7 +84,7 @@ ip-tunnel - tunnel configuration
.B tunnel
objects are tunnels, encapsulating packets in IP packets and then
sending them over the IP infrastructure.
The encapulating (or outer) address family is specified by the
The encapsulating (or outer) address family is specified by the
.B -f
option. The default is IPv4.
@ -163,7 +163,7 @@ changes.
.B nopmtudisc
disable Path MTU Discovery on this tunnel.
It is enabled by default. Note that a fixed ttl is incompatible
with this option: tunnelling with a fixed ttl always makes pmtu
with this option: tunneling with a fixed ttl always makes pmtu
discovery.
.TP

2
man/man8/tc-cbq-details.8
View File

@ -273,7 +273,7 @@ are still deemed to have this size. Defaults to zero.
.TP
ewma log
When CBQ needs to measure the average idle time, it does so using an
Exponentially Weighted Moving Average which smoothes out measurements into
Exponentially Weighted Moving Average which smooths out measurements into
a moving average. The EWMA LOG determines how much smoothing occurs. Defaults
to 5. Lower values imply greater sensitivity. Must be between 0 and 31.
.P

2
man/man8/tc-cbq.8
View File

@ -184,7 +184,7 @@ are still deemed to have this size. Defaults to zero.
.TP
ewma log
When CBQ needs to measure the average idle time, it does so using an
Exponentially Weighted Moving Average which smoothes out measurements into
Exponentially Weighted Moving Average which smooths out measurements into
a moving average. The EWMA LOG determines how much smoothing occurs. Lower
values imply greater sensitivity. Must be between 0 and 31. Defaults
to 5.

2
man/man8/tc-ematch.8
View File

@ -99,7 +99,7 @@ u32 ematch
.IR ALIGN " := { " u8 " | " u16 " | " u32 " }
.SS ipset
test packet agains ipset membership
test packet against ipset membership
.ti
.IR ipset "( " SETNAME " " FLAGS " )

2
man/man8/tc-fq_codel.8
View File

@ -20,7 +20,7 @@ BYTES ] [
]
.SH DESCRIPTION
FQ_Codel (Fair Queuing Controled Delay) is queuing discipline that combines Fair
FQ_Codel (Fair Queuing Controlled Delay) is queuing discipline that combines Fair
Queuing with the CoDel AQM scheme. FQ_Codel uses a stochastic model to classify
incoming packets into different flows and is used to provide a fair share of the
bandwidth to all the flows using the queue. Each such flow is managed by the