This patch is to add TCA_FLOWER_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev erspan1 ingress
# tc filter add dev erspan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
erspan_opts 1:2:0:0/1:255:0:0 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev erspan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
erspan_opts 1:2:0:0/1:255:0:0
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 1 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev vxlan1 ingress
# tc filter add dev vxlan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
vxlan_opts 65793/4008635966 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev vxlan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
vxlan_opts 65793/4008635966
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 3 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- get_u32 with base = 0 for gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
erspan_opts 1:2:0:0 \
action mirred egress redirect dev erspan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49151 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
erspan_opts 1:2:0:0
csum pipe
index 2 ref 1 bind 1
...
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
vxlan_opts 65793 \
action mirred egress redirect dev vxlan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
vxlan_opts 65793
...
v1->v2:
- get_u32 with base = 0 for gbp.
- use to print_unint("0x%x") to print gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add LWTUNNEL_IP_OPTS_ERSPAN's parse and print to implement
erspan options support in iproute_lwtunnel.
Option is expressed as version:index:dir:hwid, dir and hwid will be parsed
when version is 2, while index will be parsed when version is 1. All of
these are numbers. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip netns add a
# ip netns add b
# ip -n a link add eth0 type veth peer name eth0 netns b
# ip -n a link set eth0 up
# ip -n b link set eth0 up
# ip -n a addr add 10.1.0.1/24 dev eth0
# ip -n b addr add 10.1.0.2/24 dev eth0
# ip -n b link add erspan1 type erspan key 1 seq erspan 123 \
local 10.1.0.2 remote 10.1.0.1
# ip -n b addr add 1.1.1.1/24 dev erspan1
# ip -n b link set erspan1 up
# ip -n b route add 2.1.1.0/24 dev erspan1
# ip -n a link add erspan1 type erspan key 1 seq local 10.1.0.1 external
# ip -n a addr add 2.1.1.1/24 dev erspan1
# ip -n a link set erspan1 up
# ip -n a route add 1.1.1.0/24 encap ip id 1 \
erspan_opts 2:123:1:2 dst 10.1.0.2 dev erspan1
# ip -n a route show
# ip netns exec a ping 1.1.1.1 -c 1
1.1.1.0/24 encap ip id 1 src 0.0.0.0 dst 10.1.0.2 ttl 0 tos 0
erspan_opts 2:0:1:2 dev erspan1 scope link
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.124 ms
v1->v2:
- improve the changelog.
- use PRINT_ANY to support dumping with json format.
v2->v3:
- implement proper JSON object for opts instead of just bunch of strings.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add LWTUNNEL_IP_OPTS_VXLAN's parse and print to implement
vxlan options support in iproute_lwtunnel.
Option is expressed a number for gbp only, and vxlan doesn't support
multiple options.
With this patch, users can add and dump vxlan options like:
# ip netns add a
# ip netns add b
# ip -n a link add eth0 type veth peer name eth0 netns b
# ip -n a link set eth0 up
# ip -n b link set eth0 up
# ip -n a addr add 10.1.0.1/24 dev eth0
# ip -n b addr add 10.1.0.2/24 dev eth0
# ip -n b link add vxlan1 type vxlan id 1 local 10.1.0.2 \
remote 10.1.0.1 dev eth0 ttl 64 gbp
# ip -n b addr add 1.1.1.1/24 dev vxlan1
# ip -n b link set vxlan1 up
# ip -n b route add 2.1.1.0/24 dev vxlan1
# ip -n a link add vxlan1 type vxlan local 10.1.0.1 dev eth0 ttl 64 \
gbp external
# ip -n a addr add 2.1.1.1/24 dev vxlan1
# ip -n a link set vxlan1 up
# ip -n a route add 1.1.1.0/24 encap ip id 1 \
vxlan_opts 1110 dst 10.1.0.2 dev vxlan1
# ip -n a route show
# ip netns exec a ping 1.1.1.1 -c 1
1.1.1.0/24 encap ip id 1 src 0.0.0.0 dst 10.1.0.2 ttl 0 tos 0
vxlan_opts 1110 dev vxlan1 scope link
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.111 ms
v1->v2:
- improve the changelog.
- get_u32 with base = 0 for gbp.
- use PRINT_ANY to support dumping with json format.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add LWTUNNEL_IP(6)_OPTS and LWTUNNEL_IP_OPTS_GENEVE's
parse and print to implement geneve options support in iproute_lwtunnel.
Options are expressed as class:type:data and multiple options may be
listed using a comma delimiter, class and type are numbers and data
is a hex string.
With this patch, users can add and dump geneve options like:
# ip netns add a
# ip netns add b
# ip -n a link add eth0 type veth peer name eth0 netns b
# ip -n a link set eth0 up; ip -n b link set eth0 up
# ip -n a addr add 10.1.0.1/24 dev eth0
# ip -n b addr add 10.1.0.2/24 dev eth0
# ip -n b link add geneve1 type geneve id 1 remote 10.1.0.1 ttl 64
# ip -n b addr add 1.1.1.1/24 dev geneve1
# ip -n b link set geneve1 up
# ip -n b route add 2.1.1.0/24 dev geneve1
# ip -n a link add geneve1 type geneve external
# ip -n a addr add 2.1.1.1/24 dev geneve1
# ip -n a link set geneve1 up
# ip -n a route add 1.1.1.0/24 encap ip id 1 geneve_opts \
1:1:1212121234567890,1:1:1212121234567890,1:1:1212121234567890 \
dst 10.1.0.2 dev geneve1
# ip -n a route show
# ip netns exec a ping 1.1.1.1 -c 1
1.1.1.0/24 encap ip id 1 src 0.0.0.0 dst 10.1.0.2 ttl 0 tos 0
geneve_opts 1:1:1212121234567890,1:1:1212121234567890 ...
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.079 ms
v1->v2:
- improve the changelog.
- use PRINT_ANY to support dumping with json format.
v2->v3:
- implement proper JSON array for opts instead of just bunch of strings.
v3->v4:
- keep the same format between input and output, json and non json.
- print class and type as uint and print data as hex string.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The action pedit does not currently support dumping to JSON. Convert
print_pedit() to the print_* family of functions so that dumping is correct
both in plain and JSON mode. In plain mode, the output is character for
character the same as it was before. In JSON mode, this is an example dump:
$ tc filter add dev dummy0 ingress prio 125 flower \
action pedit ex munge udp dport set 12345 \
munge ip ttl add 1 \
munge offset 10 u8 clear
$ tc -j filter show dev dummy0 ingress | jq
[
{
"protocol": "all",
"pref": 125,
"kind": "flower",
"chain": 0
},
{
"protocol": "all",
"pref": 125,
"kind": "flower",
"chain": 0,
"options": {
"handle": 1,
"keys": {},
"not_in_hw": true,
"actions": [
{
"order": 1,
"kind": "pedit",
"control_action": {
"type": "pass"
},
"nkeys": 3,
"index": 1,
"ref": 1,
"bind": 1,
"keys": [
{
"htype": "udp",
"offset": 0,
"cmd": "set",
"val": "3039",
"mask": "ffff0000"
},
{
"htype": "ipv4",
"offset": 8,
"cmd": "add",
"val": "1000000",
"mask": "ffffff"
},
{
"htype": "network",
"offset": 8,
"cmd": "set",
"val": "0",
"mask": "ffff00ff"
}
]
}
]
}
}
]
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The Type I ERSPAN frame format is based on the barebones
IP + GRE(4-byte) encapsulation on top of the raw mirrored frame.
Both type I and II use 0x88BE as protocol type. Unlike type II
and III, no sequence number or key is required.
To creat a type I erspan tunnel device:
$ ip link add dev erspan11 type erspan \
local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 0
CC: Dmitriy Andreyevskiy <dandreye@cisco.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While at it, additionally fix a mandoc warning in mptcp.8
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Paolo Abeni says:
====================
This introduces support for the MPTCP PM netlink interface, allowing admins
to configure several aspects of the MPTCP path manager. The subcommand is
documented with a newly added man-page.
This series also includes support for MPTCP subflow diag.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement basic commands to:
- manipulate MPTCP endpoints list
- manipulate MPTCP connection limits
Examples:
1. Allows multiple subflows per MPTCP connection
$ ip mptcp limits set subflows 2
2. Accept ADD_ADDR announcement from the peer (server):
$ ip mptcp limits set add_addr_accepted 2
3. Add a ipv4 address to be annunced for backup subflows:
$ ip mptcp endpoint add 10.99.1.2 signal backup
4. Add an ipv6 address used as source for additional subflows:
$ ip mptcp endpoint add 2001::2 subflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit
790ab249b55d ("net: ethernet: fec: Prevent MII event after MII_SPEED write")
and import mptcp.h
Signed-off-by: David Ahern <dsahern@gmail.com>
Igor Russkikh says:
====================
From: Mark Starovoytov <mstarovoitov@marvell.com>
This series adds support for selecting the offloading mode of a MACsec
interface at link creation time.
Available modes are for now 'off', 'phy' and 'mac', 'off' being the default
when an interface is created.
First patch adds support for MAC offloading.
Last patch allows a user to change the offloading mode at runtime
through a new attribute, `ip link add link ... offload`:
# ip link add link enp1s0 type macsec encrypt on offload off
# ip link add link enp1s0 type macsec encrypt on offload phy
# ip link add link enp1s0 type macsec encrypt on offload mac
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for configuring offload mode upon MACsec
device creation.
If offload mode is not specified, then netlink attribute is not
added. Default behavior on the kernel side in this case is
backward-compatible (offloading is disabled by default).
Example:
$ ip link add link eth0 macsec0 type macsec port 11 encrypt on offload mac
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch enables MAC HW offload usage in iproute, since MACSec
implementation supports it now.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for configuring auto_dump attribute per reporter.
With this attribute, one can indicate whether the devlink kernel core
should execute automatic dump on error.
The change will be reflected in show, set and man commands.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix description for htb class prio parameter to indicate it's not
mandatory.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description for htb class parameter quantum.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add description for htb qdisc parameter r2q.
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In the commit referenced below, ip link started sending ERSPAN-specific
attributes even for GRE and gretap tunnels. Fix by more carefully
distinguishing between the GRE/tap and ERSPAN modes. Do not show
ERSPAN-related help in GRE/tap mode, likewise do not accept ERSPAN
arguments, or send ERSPAN attributes.
Fixes: 83c543af87 ("erspan: set erspan_ver to 1 by default")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This sentence predates addition of extended pedit for IPv6 packets.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Describe a way to update just the DSCP and just the ECN part of the
dsfield. That is useful on its own, but also it shows how retain works.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Support keywords dsfield, traffic_class and tos in the IPv6 context.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix error from make check.
n-old.tmac: <standard input>: line 86: 'R' is a string (producing the registered sign), not a macro.
Error in tc-actions.8
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Remove duplicate sub help messages for "dev" object and have them all
show help message for "dev".
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Have one help message for all dpipe commands, as it is done for the rest
of the devlink object. Possible and required options to the help.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To be consistent with the rest of the code and name of netlink
attribute, rename the dpipe_counters_enable struct fielt
to dpipe_counters_enabled.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To be consistent with netlink attribute name and also with the
"dpipe table show" output, add "counters_enabled" for "counters" in
"dpipe table set" command.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DEVLINK_ATTR_ESWITCH_ENCAP_MODE netlink attribute carries enum. But the
code assumes bool value. Fix this by treating the encap mode in the same
way as other eswitch mode attributes, switching from "enable"/"disable"
to "basic"/"none", according to the enum. Maintain the backward
compatibility to allow user to pass "enable"/"disable" too. Also to be
in-sync with the rest of the "mode" commands, rename to "encap-mode".
Adjust the help and man page accordingly.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix the help and man page of "devlink health set" command to be aligned
with the rest of helps and man pages.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Change the code that is doing custom processing of boolean command line
options to use dl_argv_bool(). Extend strtobool() to accept
"enable"/"disable" to maintain current behavior.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend bash-completion for two new commands:
devlink trap policer set DEV policer POLICER [ rate RATE ] [ burst BURST ]
devlink trap policer show DEV policer POLICER
And for "policer" / "nopolicer" parameters in existing command:
devlink trap group set DEV group GROUP [ action { trap | drop } ]
[ policer POLICER ] [ nopolicer ]
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add ability to associate a policer with a trap group. The policer can be
unbound by using the 'nopolicer' keyword. In which case, the value
encoded in the 'DEVLINK_ATTR_TRAP_POLICER_ID' attribute will be '0'.
This is consistent with ip-link 'nomaster' keyword and the 'IFLA_MASTER'
attribute.
Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops policer 2
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"policer": 2
} ]
}
}
# devlink trap group set netdevsim/netdevsim10 group l3_drops nopolicer
# devlink -jp trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap policer set command allows the user to set the parameters of
the packet trap policer, such as rate and burst size. Example:
# devlink trap policer set netdevsim/netdevsim10 policer 1 rate 1000 burst 32
The trap policer show command allows the user to get the current
parameters of an individual policer or a dump of all policers in case
one is not specified. When '-s' is specified the policer's statistics
are shown. Example:
# devlink -jps trap policer show netdevsim/netdevsim10 policer 1
{
"trap_policer": {
"netdevsim/netdevsim10": [ {
"policer": 1,
"rate": 1000,
"burst": 32,
"stats": {
"rx": {
"dropped": 53
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When multiple bridges are present, 'bridge link show' diplays ports
for all bridges. Make this clear in the command description, and
point out the user to the ip command to display ports for a specific
bridge.
Reported-by: Marc Muehlfeld <mmuehlfe@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add function for command completion for devlink in bash, and update Makefile
to install it under /usr/share/bash-completion/completions/.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Recognize the new configuration option of the RED Qdisc, "nodrop". Add
support for passing flags through TCA_RED_FLAGS, and use it when passing
TC_RED_NODROP flag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern
Xin Long
Petr Machata
William Tu
Paolo Abeni
Davide Caratti
Mark Starovoytov
Eran Ben Elisha
Benjamin Lee
Jiri Pirko
Stephen Hemminger
Ido Schimmel
Andrea Claudi
Danielle Ratson