Replace calls for pr_out_bool() and pr_out_uint() with direct calls
to common json_print library function print_bool() and print_uint().
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_bool/uint/uint64_value with direct calls for the
matching common json_print library function: print_bool(), print_uint()
and print_u64()
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_out_str() and pr_out_str_value() with direct calls to
common json_print library functions.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Substitute json prints to use json_print.c common library functions,
instead of directly calling jsonw_functions.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently new json object opens (and delete_json_obj closes) the object as
an array, what adds prints for the matching bracket '[' ']' at the
start/end of the object. This patch adds new_json_obj_plain() and the
matching delete_json_obj_plain() to enable opening and closing json object,
not as array and leave it to the using function to decide which type of
object to open/close as the main object.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Until now print_#type functions supported printing constant names and
unknown (variable) values only.
Add functions to allow printing when the name is also sent to the
function as a variable.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
config: put YACC in config.mk and use environmental variable if present
ss:
use YACC variable instead of hardcoding bison
place options before source file argument
use -b to specify file prefix instead of output file, as -o isn't POSIX
compatible, this generates ssfilter.tab.c instead of ssfilter.c
replace any references to ssfilter.c with references to ssfilter.tab.c
tc:
use -p flag to set name prefix instead of bison-specific api.prefix
directive
remove unneeded bison-specific directives
use -b instead of -o, replace references to previously generated
emp_ematch.yacc.[ch] with references to newly generated
emp_ematch.tab.[ch]
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
$ make CCOPTS=-fno-common
gcc ... -o ip
ld: rt_names.o (symbol from plugin): in function "rtnl_rtprot_n2a":
(.text+0x0): multiple definition of "numeric"; ip.o (symbol from plugin):(.text+0x0): first defined here
gcc ... -o tipc
ld: ../lib/libutil.a(utils.o):(.bss+0xc): multiple definition of `pretty';
tipc.o:tipc.c:28: first defined here
References: https://bugzilla.opensuse.org/1160244
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When building tipc with clang, the following warning is found:
tipc
CC bearer.o
CC cmdl.o
CC link.o
CC media.o
CC misc.o
CC msg.o
CC nametable.o
CC node.o
node.c:182:24: warning: field 'key' with variable sized type 'struct tipc_aead_key' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct tipc_aead_key key;
This commit fixes it by putting the memory area allocated for the user
input key along with the variable-sized 'key' structure in the 'union'
form instead.
Fixes: 24bee3bf97 ("tipc: add new commands to set TIPC AEAD key")
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the TBF Qdisc.
Also, fix the style of the statement that's calculating "latency" in
tbf_print_opt().
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the SFQ Qdisc.
Use the long double format specifier to print the value of
"probability".
Also, fix the indentation in the online output of the contents in the
tc_sfqred_stats structure.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the SFB Qdisc.
Make the output for options "rehash" and "db" explicit.
Use the long double format specifier to print probability values.
Use sprint_time() to print time values.
Also, fix the indentation in sfb_print_opt().
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the PIE Qdisc.
Use sprint_time() to print the value of tc_pie_xstats->delay.
Use the long double format specifier to print tc_pie_xstats->prob.
Also, fix the indentation in the oneline output of statistics and update
the man page to reflect this change.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the HHF Qdisc.
Also, use sprint_size() to print size values.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the FQ Qdisc.
Use the "KEY VALUE" format for oneline output of statistics instead of
"VALUE KEY", and remove unnecessary commas from the output.
Use sprint_size() to print size values in fq_print_opt().
Use sprint_time64() to print time values in fq_print_xstats().
Also, update the man page to reflect the changes in the output format.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the choke Qdisc.
Also, use the long double format specifier to print the value of
"probability".
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the CBS Qdisc.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
if_id is u32, error on -ve values instead of setting to 0
after :
ip link add ipsec1 type xfrm dev lo if_id -10
Error: argument "-10" is wrong: if_id value is invalid
before : note xfrm if_id 0
ip link add ipsec1 type xfrm dev lo if_id -10
ip -d link show dev ipsec1
9: ipsec1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Fixes: 286446c1e8 ("ip: support for xfrm interfaces")
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a new attribute representing a new time-stamp format: current
time in ns (to comply with y2038) instead of jiffies. If the new
attribute was received, translate the time-stamp accordingly (ns).
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add pr_out_dump_reporter prefix to the helper function's name and
encapsulate the print in it.
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
repeats for "vlan tunnelshow" what commit 0f36267485 ("bridge: fix vlan
show formatting") did for "vlan show". This fixes problems in json output.
Note that the resulting json output format of "vlan tunnelshow" is not the
same as the original, introduced in commit 8652eeb3ab ("bridge: vlan:
support for per vlan tunnel info"). Changes similar to the ones done for
"vlan show" in commit 0f36267485 ("bridge: fix vlan show formatting") are
carried over to "vlan tunnelshow".
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Fixes: 0f36267485 ("bridge: fix vlan show formatting")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_vlan() and print_vlan_tunnel() are almost identical copies, save for
a missing newline in the latter which leads to broken output of "vlan
tunnelshow" in normal mode.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit c7c1a1ef51 ("bridge: colorize output and use JSON print
library"), print_range() is used for vid (16bits) and vni. However, the
latter are 32bits so they get truncated. They got truncated even before
that commit though.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As per the kernel's vlan_tunnel_policy, IFLA_BRIDGE_VLAN_TUNNEL_VID and
IFLA_BRIDGE_VLAN_TUNNEL_FLAGS have type NLA_U16.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
"SRC VNI" is only one argument and should appear as such. Moreover, this
argument to the src_vni option is documented under three forms: "SRC_VNI",
"SRC VNI" and "VNI" in different places. Consistenly use the simplest form,
"VNI".
Fixes: c5b176e5ba ("bridge: fdb: add support for src_vni option")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
a substring match is not enough, ex: 10 != 1
Fixes: 30383b074d ("tests: Add output testing")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 6377572f0a ("ip: ip_print: add new API to print JSON or regular format output")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The previous change to ss to show header broke the printing of
end-of-line for the last entry.
Tested:
diff <(./ss.old -nltp) <(misc/ss -nltp)
38c38
< LISTEN 0 128 [::1]:35417 [::]:* users:(("foo",pid=65254,fd=116))
\ No newline at end of file
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Warning was:
q_pie.c:202:22: error: implicit conversion from 'unsigned long' to
'double'
Fixes: 492ec9558b ("tc: pie: change maximum integer value of tc_pie_xstats->prob")
Cc: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PIE now uses per packet timestamps to calculate queuing
delay. The average dequeue rate based queue delay
calculation is now made optional. This patch adds the option
to enable or disable the use of Little's law to calculate
queuing delay.
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Two new commands are added as part of 'tipc node' command:
$tipc node set key KEY [algname ALGNAME] [nodeid NODEID]
$tipc node flush key
which enable user to set and remove AEAD keys in kernel TIPC (requires
the kernel option - 'TIPC_CRYPTO').
For the 'set key' command, the given 'nodeid' parameter decides the
mode to be applied to the key, particularly:
- If NODEID is empty, the key is a 'cluster' key which will be used for
all message encryption/decryption from/to the node (i.e. both TX & RX).
The same key will be set in the other nodes.
- If NODEID is own node, the key is used for message encryption (TX)
from the node. Whereas, if NODEID is a peer node, the key is for
message decryption (RX) from that peer node. This is the 'per-node-key'
mode that each nodes in the cluster has its specific (TX) key.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: David Ahern <dsahern@gmail.com>
Add functions for big endian masked numbers as a pre-step towards masked
port numbers.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add u16 big endian parse option as a pre-step towards TCP/UDP/SCTP
ports usage.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ron Diskin
Roi Dayan
Ethan Sommer
Jan Engelhardt
Stephen Hemminger
Vladis Dronov
Tuong Lien
Leslie Monis
Antony Antony
Aya Levin
Benjamin Poirier
Brian Vazquez
Bjarni Ingi Gislason
Gautam Ramakrishnan
Eric Dumazet
David Ahern
Eli Britstein