This allows a cycle-time and a cycle-time-extension to be specified.
Specifying a cycle-time will truncate that cycle, so when that instant
is reached, the cycle will start from its beginning.
A cycle-time-extension may cause the last entry of a cycle, just
before the start of a new schedule (the base-time of the "admin"
schedule) to be extended by at maximum "cycle-time-extension"
nanoseconds. The idea of this feauture, as described by the IEEE
802.1Q, is too avoid too narrow gate states.
Example:
tc qdisc change dev IFACE parent root handle 100 taprio \
sched-entry S 0x1 1000000 \
sched-entry S 0x0 2000000 \
sched-entry S 0x1 3000000 \
sched-entry S 0x0 4000000 \
cycle-time-extension 100000 \
cycle-time 9000000 \
base-time 12345678900000000
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This allows for a new schedule to be specified during runtime, without
removing the current one.
For that, the semantics of the 'tc qdisc change' operation in the
context of taprio is that if "change" is called and there is a running
schedule, a new schedule is created and the base-time (let's call it
X) of this new schedule is used so at instant X, it becomes the
"current" schedule. So, in short, "change" doesn't change the current
schedule, it creates a new one and sets it up to it becomes the
current one at some point.
In IEEE 802.1Q terms, it means that we have support for the
"Oper" (current and read-only) and "Admin" (future and mutable)
schedules.
Example of creating the first schedule, then adding a new one:
(1)
tc qdisc add dev IFACE parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
sched-entry S 0x1 1000000 \
sched-entry S 0x0 2000000 \
sched-entry S 0x1 3000000 \
sched-entry S 0x0 4000000 \
base-time 100000000 \
clockid CLOCK_TAI
(2)
tc qdisc change dev IFACE parent root handle 100 taprio \
base-time 7500000000000 \
sched-entry S 0x0 5000000 \
sched-entry S 0x1 5000000 \
It was necessary to fix a bug, so the clockid doesn't need to be
specified when changing the schedule.
Most of the changes are related to make it easier to reuse the same
function for printing the "admin" and "oper" schedules.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
sch_plug can be used to perform functional qdisc unit tests
controlling explicitly the queuing behaviour from user-space.
Plug support lacks since its introduction in 2012. This change
introduces basic support, to control the tc status.
v1 -> v2:
- use the SPDX identifier
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This adds support for the newly added fwmark option to CAKE, which allows
overriding the tin selection from the per-packet firewall marks. The fwmark
field is a bitmask that is applied to the fwmark to select the tin.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
tc_pie_xstats->prob has a maximum value of (2^64 - 1).
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
action m_connmark returns error messages identifying itself as the
'simple' action instead of 'connmark' action. e.g.
tc filter add dev eth0 protocol all u32 match u32 0 0 flowid 1:1 \
action connmark index wrong
simple: Illegal "index"
bad action parsing
parse_action: bad value (3:connmark)!
Illegal "action"
In what is most likely a copy/paste error from the simple action example
code, fix connmark error messages to identify themselves as coming from
connmark.
tc filter add dev eth0 protocol all u32 match u32 0 0 flowid 1:1 \
action connmark index wrong
connmark: Illegal "index"
bad action parsing
parse_action: bad value (3:connmark)!
Illegal "action"
While we're here also fixup the 'Illegal "Zone"' error code to say
'Illegal "zone"' instead of 'Illegal "index"'
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tc pedit action with more than two ip6 munge in a row cause infinite
loop.
Example:
$ tc filter add dev eth0 protocol ipv6 parent ffff: \
flower ip_proto sctp \
action pedit ex \
munge ip6 hoplimit set 0x1 \
munge ip6 src set 2001:0db8:0:f101::1 \
munge that cause infinite loop
The example command never returns, instead of failing with parse error
as expected. Pedit ipv6 structure has wrong id, which leads to the
creation linked list with one node in tc/m_pedit.c:get_pedit_kind(),
referring to itself. This node is created if command have two ip6 munge
in a row, and any third ip6 munge will cause infinite loop.
Changing this id from "ipv6" to "ip6" solves the problem.
Fixes: f3e1b2448a ("pedit: Introduce ipv6 support")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As /sys/class/net/<iface>/speed indicates a value in Mbits/sec, the
conversion is necessary to create the correct limits.
This guarantees the same result for the following commands in an
1000Mbit/sec device:
tc class add ... htb rate 500Mbit
tc class add ... htb rate 50%
Fixes: 927e3cfb52 ("tc: B.W limits can now be specified in %.")
Signed-off-by: Marcos Antonio Moraes <marcos.antonio@digirati.com.br>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The parse_percent_rate function assumed the buffer was 20 characters.
Better to pass length in case the size ever changes.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If value passed to parse_percent was not valid, it would
leak the dynamic allocation from sscanf.
Fixes: 927e3cfb52 ("tc: B.W limits can now be specified in %.")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
unlike other TC actions already supporting JSON printout, 'csum' does not
print the value of TCA_KIND in the 'kind' property: remove 'csum' word
from 'csum' property, and add a separate 'kind' property containing the
action name. The human-readable printout is preserved.
Tested with:
# ./tdc.py -c csum
Cc: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The kernel (and iproute2) don't use the if (NULL == x) style
and instead prefer if (!x)
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
XATTR_SIZE_MAX requires the usage of linux/limits.h; let's include it
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Change the id parameter of the tunnel_key set action from mandatory to
optional.
Some tunneling protocols (e.g. GRE) specify the id as an optional field.
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Cc: Martin Olsson <martin.olsson+netdev@sentorsecurity.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The incorrect setting of LDFLAGS causes error below:
> em_ipt.o: In function `em_ipt_print_epot':
> em_ipt.c:(.text.em_ipt_print_epot+0x2e): undefined reference to
> `xtables_init_all'
em_ipt.c gets involved when TC_CONFIG_XT=y, which requires xtables,
while tc/Makefile doesn't pass flags correctly. It adds '-lxtables'
to LDFLAGS instead of LDLIBS.
Fixes: dd296215 ("tc: add em_ipt ematch for calling xtables matches from tc matching context")
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Acked-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The argument to print_0xhex is converted to unsigned long long
so the format string give for normal printout has to be some
variant of %llx. Otherwise, bogus values will be printed on
32 bit platforms.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Added support for filtering based on port ranges.
UAPI changes have been accepted into net-next.
Example:
1. Match on a port range:
-------------------------
$ tc filter add dev enp4s0 protocol ip parent ffff:\
prio 1 flower ip_proto tcp dst_port 20-30 skip_hw\
action drop
$ tc -s filter show dev enp4s0 parent ffff:
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port 20-30
skip_hw
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 85 sec used 3 sec
Action statistics:
Sent 460 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
2. Match on IP address and port range:
--------------------------------------
$ tc filter add dev enp4s0 protocol ip parent ffff:\
prio 1 flower dst_ip 192.168.1.1 ip_proto tcp dst_port 100-200\
skip_hw action drop
$ tc -s filter show dev enp4s0 parent ffff:
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto tcp
dst_ip 192.168.1.1
dst_port 100-200
skip_hw
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 2 ref 1 bind 1 installed 58 sec used 2 sec
Action statistics:
Sent 920 bytes 20 pkt (dropped 20, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v6:
Modified to change json output format as object for sport/dport.
"dst_port":{
"start":2000,
"end":6000
},
"src_port":{
"start":50,
"end":60
}
v5:
Simplified some code and used 'sscanf' for parsing. Removed
space in output format.
v4:
Added man updates explaining filtering based on port ranges.
Removed 'range' keyword.
v3:
Modified flower_port_range_attr_type calls.
v2:
Addressed Jiri's comment to sync output format with input
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel commit 48872c11b772 ("net_sched: sch_fq: add dctcp-like marking")
added support for TCA_FQ_CE_THRESHOLD attribute.
This patch adds iproute2 support for it.
It also makes sure fq_print_xstats() can deal with smaller tc_fq_qd_stats
structures given by older kernels.
Usage :
FQATTRS="ce_threshold 4ms"
TXQS=8
for ETH in eth0
do
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
tc qd add dev $ETH parent 1:$i fq $FQATTRS
done
done
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel now support setting ECN and HARDDROP flags per-virtual
queue. Allow users to tweak the settings, and print them on
dump.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel GRED qdisc supports ECN marking, and the harddrop flag
but setting and dumping this flag is not possible with iproute2.
Add the support.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use the extended attributes with extra and better stats, when
possible.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Printing GRED statistics is long and deserves a function on its own.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Number of qdiscs use the same set of flags to control shared RED
implementation. Add a helper for printing those flags.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The comment about providing a proper message seems similar to
the comment in the kernel which says:
/* hack -- fix at some point with proper message
This is how we indicate to tc that there is no VQ
at this DP */
it's unclear what that message would be, and whether it's needed.
Remove the confusing comment.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Added support for filtering based on port ranges.
UAPI changes have been accepted into net-next.
Example:
1. Match on a port range:
-------------------------
$ tc filter add dev enp4s0 protocol ip parent ffff:\
prio 1 flower ip_proto tcp dst_port range 20-30 skip_hw\
action drop
$ tc -s filter show dev enp4s0 parent ffff:
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port range 20-30
skip_hw
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 85 sec used 3 sec
Action statistics:
Sent 460 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
2. Match on IP address and port range:
--------------------------------------
$ tc filter add dev enp4s0 protocol ip parent ffff:\
prio 1 flower dst_ip 192.168.1.1 ip_proto tcp dst_port range 100-200\
skip_hw action drop
$ tc -s filter show dev enp4s0 parent ffff:
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto tcp
dst_ip 192.168.1.1
dst_port range 100-200
skip_hw
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 2 ref 1 bind 1 installed 58 sec used 2 sec
Action statistics:
Sent 920 bytes 20 pkt (dropped 20, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v3:
Modified flower_port_range_attr_type calls.
v2:
Addressed Jiri's comment to sync output format with input
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The pedit callback structure table should be iniatialized using
structure initialization to avoid structure changes problems.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The tc util library parse/print has functions only used locally
(and some dead code removed).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The print handling is only used in tc/m_ematch.c
Remove unused function to print_ematch_tree.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
u32 uses NEXT_ARG() incorrectly when parsing skip_hw and skip_sw
flags. NEXT_ARG() ensures there is another argument on the command
line, and is used in handling <keyword> <value> syntax to move past
<keyword> and ensure there is a <value> to read.
Commit 5e5b3008d1 ("tc: f_u32: Add support for skip_hw and skip_sw
flags") seems to have copy pasted the handling from the previous
command - "police", which needs an extra parameter and is kind of
special due to the use of parse_police() helper.
The combination of NEXT_ARG() and continue worked fine as long as
skip_sw/skip_hw wasn't last, e.g.:
$ tc filter add dev dummy0 ingress prio 101 protocol ipv6 \
u32 match ip6 priority 0xa0 0xe0 skip_hw action pass
But would fail if it was last:
$ tc filter add dev dummy0 ingress prio 101 protocol ipv6 \
u32 match ip6 priority 0xa0 0xe0 flowid :1 skip_hw
Command line is not complete. Try option "help"
Remove the NEXT_ARG()s and the continues, and let the argc--; argv++;
at the end of the loop do its job.
Fixes: 5e5b3008d1 ("tc: f_u32: Add support for skip_hw and skip_sw flags")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When building Debian packages pre-processor flags are passed via
CPPFLAGS, as the convention indicates. Specifically, the hardening
-D_FORTIFY_SOURCE=2 flag is used.
Pass CPPFLAGS to all calls of QUIET_CC together with CFLAGS.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is simpler and cleaner, and avoids having to include the header
from every file where the functions are used. The prototypes of the
internal implementation are in this header, so utils.h will have to be
included anyway for those.
Fixes: 508f3c231e ("Use libbsd for strlcpy if available")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If libc does not provide strlcpy check for libbsd with pkg-config to
avoid relying on inline version.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Vinicius Costa Gomes
Paolo Abeni
Stephen Hemminger
Toke Høiland-Jørgensen
Leslie Monis
Kevin 'ldir' Darbyshire-Bryant
David Ahern
Dmytro Linkin
Marcos Antonio Moraes
Davide Caratti
Hans Dedecker
Adi Nissim
Cong Wang
Syrone Wong
Amritha Nambiar
Eric Dumazet
Jakub Kicinski
Luca Boccassi