Replaced handling netlink messages by rtnl_dump_filter
from lib/libnetlink.c, also:
- removed unused dump_fp arg;
- added MAGIC_SEQ #define for 123456 seq id;
- silently exit if ENOENT errno is caused for NETLINK_SOCK_DIAG proto
in lib/libnetlink.c: rtnl_duml_filter_l(...) function. This fix
was added in a3fd8e58c1 by Eric
for misc/ss.c
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Now it is posible to filter by existing Netlink protos:
ss -A netlink src uevent
ss -A netlink src nft
ss -A netlink src genl
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This patch makes CAN_CTRLMODE_PRESUME_ACK netlink feature configurable.
When enabled, the feature sets CAN controller in mode in which
acknowledgement absence is ignored.
Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
On Fri, 2014-12-05 at 17:13 -0800, Eric Dumazet wrote:
> I guess we could count number of spaces/fields in both lines,
> and disable the iproute2 trick if counts match.
Something like that maybe ?
misc/nstat.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
This patch fixes the following issues which was introduced by me in commits:
#1 (2dc854854b) ss: Fixed broken output for Netlink 'Peer Address:Port' column
ISSUE: Broken layout when all sockets are printed out
#2 (eef43b5052) ss: Identify more netlink protocol names
ISSUE: Protocol id is not printed if 'numbers only' output was specified (-n)
Also aligned the width of the local/peer ports to be more wider.
I tested with a lot of option combinations (I may miss some test cases),
but layout seems to me better than the previous released version of iproute2/ss.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
The issue was observed when IPv6 router broadcasted NDUSEROPT
messages which are not handled by monitor and caused printing
'Timestamps' w/o message because such kind of rtnl messages is not
handled by monitor.
As 'ip monitor' by default subscribes to the all mcast rtnl groups except
RTGRP_TC then all messages of these rtnl groups which are not handled by
monitor may cause such issues.
Fixed by subscribing by default to rtnl mcast groups which are
supported by 'ip monitor'.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This option was used only for 'ip link', but it can be useful to have it for
'ip address'. Thus it is possible to display link details and addresses with one
command.
Example:
$ ip -d a ls dev gre1
9: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1468 qdisc noqueue state UNKNOWN group default
link/gre 10.16.0.249 peer 10.16.0.121 promiscuity 0
gre remote 10.16.0.121 local 10.16.0.249 ttl inherit ikey 0.0.0.10 okey 0.0.0.10 icsum ocsum
inet 192.168.0.249 peer 192.168.0.121/32 scope global gre1
valid_lft forever preferred_lft forever
inet6 fe80::5efe:a10:f9/64 scope link
valid_lft forever preferred_lft forever
Suggested-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This option was used only for 'ip link', but it can be useful to have it for
'ip address'. Thus it is possible to display link details and addresses with one
command.
Example:
$ ip -d a ls dev gre1
9: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1468 qdisc noqueue state UNKNOWN group default
link/gre 10.16.0.249 peer 10.16.0.121 promiscuity 0
gre remote 10.16.0.121 local 10.16.0.249 ttl inherit ikey 0.0.0.10 okey 0.0.0.10 icsum ocsum
inet 192.168.0.249 peer 192.168.0.121/32 scope global gre1
valid_lft forever preferred_lft forever
inet6 fe80::5efe:a10:f9/64 scope link
valid_lft forever preferred_lft forever
Suggested-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Add NTF_EXT_LEARNED flag to neigh flags to indicate FDB entry learned by
device has been learned externally to bridge FDB. For these entries,
add "external" annotation in bridge fdb show output:
00:02:00:00:03:00 dev swp2 used 2/2 master br0 external
00:02:00:00:03:00 dev swp2 self permanent
In the example above, 00:02:00:00:03:00 is shown twice on dev swp2. The
first entry if from the bridge (master) and is marked as "external" by
the offload device. The second entry is from the brport offload device (self),
and was learned by the device.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
This permits to selectively enable explicit congestion notification via
the routing table.
If this ecn feature is not set, the kernel will use the tcp_ecn sysctl
to decide wheter to use ECN when establising a TCP connection.
At the time of this writing, the kernel supports ecn and allfrags, but
allfrags is of dubious value and not implemented here.
Example:
ip route change 192.168.2.0/24 dev eth0 features ecn
Signed-off-by: Florian Westphal <fw@strlen.de>
Adding basic support to create virtual devices using 'ip'
utility. Following is the syntax -
ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
e.g. ip link add link eth0 ipvl0 type ipvlan mode l3
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
BEFORE:
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information.
-h, -human, -human-readble
output statistics with human readable values number followed by suffix
-iec print human readable rates in IEC units (ie. 1K = 1024).
AFTER:
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information.
-h, -human, -human-readble
output statistics with human readable values number followed by suffix
-iec print human readable rates in IEC units (ie. 1K = 1024).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Added checking existence of the doc files converters.
If the XXX tool exists then HAVE_XXX:=y will be written
to the Config file. Example of the configure script output:
TC schedulers
ATM no
IPT using xtables
IPSET yes
iptables modules directory: /usr/lib/iptables
libc has setns: yes
SELinux support: no
Docs
latex: no
WARNING: no docs can be built from LaTeX files
sgml2html: yes
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
When output the netlink sockets:
ss -A netlink state close
the layout is a little broken with a shifted 'Peer Address:Port'
stars and empty new lines. Fixed by making the port field to be
wider for 'Local Address:Port' column.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
I dont see a reason that packet and netlink states will be
printed only if SS_CLOSE state is set in filter, in that case
to print states of netlink or packet sockets it is needed to run:
ss -A netlink state close
instead of:
ss -A netlink
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
As 'ip' util will share the same netns from the caller
process then we can just look at /proc/self/.. to show
the netns of the current process by:
ip netns id
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
With this change the results of tc tests will be recorded under:
testsuite/results/tc/
The ip related tests can be added under:
testsuite/tests/ip
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
There were only few Netlink protocol names
which were printed on the screen:
rtnl, fw, tcpdiag
So added the ability to identify Netlink proto name
from /etc/iproute/nl_protos or from static table.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Add udpcsum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add udp6zerocsumtx, and udp6zerocsumrx options to enable
sending zero checksums and receiving zero checksums in VXLAN/IPv6.
Signed-off-by: Tom Herbert <therbert@google.com>
ip route change dev tap0 192.168.7.0/24 rto_min 1ms
Error: argument "1ms" is wrong: "rto_min" value is invalid
get_time_rtt() checks for 's' or 'msec' and converts to milliseconds
if needed.
Fixes: 697ac63905 (utils: fix range checking for get_u32/get_u64 et all)
Signed-off-by: Florian Westphal <fw@strlen.de>
Man pages for Foo-over-UDP and Generic UDP Encapsulation receive
port configuration. gue man page links to fou one.
Signed-off-by: Tom Herbert <therbert@google.com>
This patch adds support to configure foo-over-udp (FOU) and Generic
UDP Encapsulation for GRE tunnels. This configuration allows selection
of FOU or GUE for the tunnel, specification of the source and
destination ports for UDP tunnel, and enabling TX checksum. This
configuration only affects the transmit side of a tunnel.
Example:
ip link add name tun1 type gre remote 192.168.1.1 local 192.168.1.2 \
ttl 225 encap fou encap-sport auto encap-dport 7777 encap-csum
This would create an GRE tunnel in GUE encapsulation where the source
port is automatically selected (based on hash of inner packet) and
checksums in the encapsulating UDP header are enabled.
Signed-off-by: Tom Herbert <therbert@google.com>
This patch adds support to configure foo-over-udp (FOU) and Generic
UDP Encapsulation for IPIP and sit tunnels. This configuration allows
selection of FOU or GUE for the tunnel, specification of the source and
destination ports for UDP tunnel, and enabling TX checksum. This
configuration only affects the transmit side of a tunnel.
Example:
ip link add name tun1 type ipip remote 192.168.1.1 local 192.168.1.2 \
ttl 225 encap gue encap-sport auto encap-dport 9999 encap-csum
This would create an IPIP tunnel in GUE encapsulation where the source
port is automatically selected (based on hash of inner packet) and
checksums in the encapsulating UDP header are enabled.
Signed-off-by: Tom Herbert <therbert@google.com>
Added 'ip fou...' commands to enable/disable UDP ports for doing
foo-over-udp and Generic UDP Encapsulation variant. Arguments are port
number to bind to and IP protocol to map to port (for direct FOU).
Examples:
ip fou add port 7777 gue
ip fou add port 8888 ipproto 4
The first command creates a GUE port, the second creates a direct FOU
port for IPIP (receive payload is a assumed to be an IPv4 packet).
Signed-off-by: Tom Herbert <therbert@google.com>
Stephen Hemminger
vadimk
Nikita Edward Baruzdin
Eric Dumazet
Nicolas Dichtel
Scott Feldman
Florian Westphal
Mahesh Bandewar
Jiri Pirko
Pavel Simerda
Dave Taht
Tom Herbert
Or Gerlitz
Masatake YAMATO