Currently the pdf docs are done with
sgml -> sgmltool -> tex -> latex -> dvi -> dvips -> ps -> ps2pdf -> pdf
or
tex -> latex -> dvi -> dvips -> ps -> ps2pdf -> pdf
with this patch we do
sgml -> sgmltool -> tex -> pdflatex -> pdf
or
tex -> pdflatex -> pdf
Both macros are used together, so better to have
single define. Update all requests in ipl2tp.c to use the
new macro.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
This patch finishes removing the replace option from the bridge
man page which I missed in this commit
commit 57b9785de3
Author: John Fastabend <john.r.fastabend@intel.com>
Date: Mon Aug 27 10:52:31 2012 -0700
iproute2: bridge: remove replace and change options
Also add documentation for "{ self | embedded }" already shown on
the cmd line help msg.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
This functionality is required by checkpoint-restore project. Since the
dump and restore for routes is already done in ip tool it's naturally to
dump and restore addresses in the ip tool as well.
The implementation logic is the same as for the respective one for routes.
The magic number digits are taken from the Seattle coordinates.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Create libgenl.h and libgenl.c. They will contain
common code for GENL users such as ipl2tp, tcp_metrics, etc.
Somewhat simplified by Stephen Hemminger
Signed-off-by: Julian Anastasov <ja@ssi.bg>
- rename section UNITS to PARAMETERS.
- break section PARAMETERS down to four subsections to cover the
common used parameter types(RATES, TIMES, SIZES, VALUES).
- add some explaination for IEC units in RATES.
- point out the max value we can set for RATES, TIMES and SIZES.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Some time ago the save+restore commands were added to ip route (git
id f4ff11e3, Add ip route save/restore). These two save the raw rtnl
stream into a file and restore one (reading it from stdin).
The problem is that there's no way to get the contents of the dump
file in a human readable form. The proposal is to add a command that
reads the rtnl stream from stdin and prints the data in a way the
usual "ip route list" does?
changes since v1:
* Take the magic at the beginning of the dump file into account
* Check for stdin (the dump is taken from) is not a tty
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
In order to somehow verify that a blob contains route dump a
4-bytes magic is put at the head of the data and is checked
on restore.
Magic digits are taken from Portland (OR) coordinates :) Is
there any more reliable way of generating such?
Signed-of-by: Pavel Emelyanov <xemul@parallels.com>
Commit e557d1a ("Don't put configure files in /tmp") introduced a typo
that prevented automated cleanup of the temporary directory created for
feature testing. Fix this typo.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Replace and change are not supported by bridge netlink so remove it
from bridge tool options.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
After latest commit 'Install all tc and ip sub pages' this error
occurs on make.
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/git/kernel.org/iproute2/man/man3'
make[2]: Entering directory `/home/git/kernel.org/iproute2/man/man8'
Makefile:8: *** commands commence before first target. Stop.
make[2]: Leaving directory `/home/git/kernel.org/iproute2/man/man8'
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Add command to update and print FDB entries with NTF_SELF and
NTF_MASTER set.
Example usages illustrating use of 'self' to program embedded
forwarding table and 'master' to configure the forwarding table
of the bridge. Also shows 'master self' used to update both in
the same command.
#./br/br fdb add 00:1b:21:55:23:60 dev eth3 self
#./br/br fdb add 00:1b:21:55:23:60 dev eth3 master
#./br/br fdb add 00:1b:21:55:23:61 dev eth3 self master
#./br/br fdb add 00:1b:21:55:23:62 dev eth3
#./br/br fdb show
eth3 00:1b:21:55:23:60 local self
eth3 00:1b:21:55:23:61 local self
eth3 33:33:00:00:00:01 local self
eth3 01:00:5e:00:00:01 local self
eth3 33:33:ff:55:23:59 local self
eth3 01:00:5e:00:00:fb local self
eth33 33:33:00:00:00:01 local self
eth34 33:33:00:00:00:01 local self
eth3 00:1b:21:55:23:59 local master
eth3 00:1b:21:55:23:60 static master
eth3 00:1b:21:55:23:62 static master
eth3 00:1b:21:55:23:61 static master
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
This ematch enables effective filtering of CAN frames (AF_CAN) based
on CAN identifiers with masking of compared bits. Implementation
utilizes bitmap based classification for standard frame format (SFF)
which is optimized for minimal overhead.
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Callers of rtnl_talk check errno value for their needs. In particular, the addrs
and routes restoring code validly reports success if the EEXISTS is in there.
However, the errno value can be sometimes screwed up by the perror call. Thus
we should only set it _after_ the message was emitted.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
The bridge command used to be called br but was renamed bridge. Correct
the outdated references to the br name in the help messages, together with a
typo of '-help' for 'help'.
Signed-off-by: Chris Webb <chris@arachsys.com>
example usage:
tc filter add dev $dev parent $id: basic match not ipset'(foobar src)' ..
also updates iproute2/ematch_map, else tc complains:
Error: Unable to find ematch "ipset" in /etc/iproute2/ematch_map
Please assign a unique ID to the ematch kind the suggested entry is:
8 ipset
when trying to use this ematch.
(text ematch (5) only exists in kernel, a vlan ematch (6) exists neither in
kernel nor userspace, but kernel headers define TCF_EM_VLAN == 6).
`ip a s` no longer shows addresses since 3.4.0 works, but 3.5.0,
the simple test case:
make clean && make -j -s && ./ip/ip a s lo
before that change, i would get:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
but after, i now get:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
seems like the bug was introduced in the middle of that patch:
- if (filter.family != AF_PACKET) {
+ if (filter.family && filter.family != AF_PACKET) {
+ if (filter.oneline)
+ no_link = 1;
+
if (rtnl_wilddump_request(&rth, filter.family, RTM_GETADDR) < 0) {
perror("Cannot send dump request");
exit(1);
if i revert the change to the if statement there, `ip a s` works for me again.
linux-3.6-rc1 supports SK_MEMINFO_BACKLOG with commit d594e987c6f54
(sock_diag: add SK_MEMINFO_BACKLOG)
ss command can display it if provided by the kernel.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vijay Subramanian <subramanian.vijay@gmail.com>
Alternative solution to problem reported by Pravin B Shelar <pshelar@nicira.com>
Split large function ipaddr_list_or_flush into components.
Fix memory leak of address and link nlmsg info.
Avoid fetching address info if only flushing.
Stephen Hemminger
Werner Fink
Julian Anastasov
John Fastabend
Pavel Emelyanov
Li Wei
Andreas Schwab
Mathias Krause
Oliver Hartkopp
Rostislav Lisovy
Dan Kenigsberg
Chris Webb
Florian Westphal
Mike Frysinger
Xose Vazquez Perez
Jiri Pirko
Eric Dumazet
Saurabh
Ben Hutchings