Consider the following command:
ip tunnel add mode vti remote 12.0.0.1 local 12.0.0.3 ikey 15
i_flags will be GRE_KEY|VTI_ISVTI. So, in order to distinguish between ipip and
vti we have to check just VTI_ISVTI bit, not the equality of i_flags and
VTI_ISVTI.
* Note, that there also was a bug in ip_tunnel/ip_vti, see
commit 7c8e6b9c281(ip_vti: Fix 'ip tunnel add' with 'key' parameters),
https://lkml.org/lkml/2014/6/7/125.
Even patched iproute could be unable to create vti tunnels with non-zero keys.
1) Unpatched iproute2:
[root@vm ~]# ip tunnel show
[root@vm ~]# lsmod | egrep '(ipip|vti)'
[root@vm ~]# ip tunnel add mode vti ikey 1
[root@vm ~]# lsmod | egrep '(ipip|vti)'
ipip 4197 0
tunnel4 1659 1 ipip
ip_tunnel 9295 1 ipip
[root@vm ~]# ip tunnel show
tunl0: ip/ip remote any local any ttl inherit
[root@vm ~]# ip tunnel add mode vti remote 1.2.3.4 ikey 2
[root@vm ~]# ip tunnel show
ipip0: ip/ip remote 1.2.3.4 local any ttl inherit
tunl0: ip/ip remote any local any ttl inherit
[root@vm ~]# lsmod | egrep '(ipip|vti)'
ipip 4197 0
tunnel4 1659 1 ipip
ip_tunnel 9295 1 ipip
# ipip tunnels are created instead of vti
2) Patched iproute2:
[root@vm ~]# ip tunnel show
[root@vm ~]# lsmod | egrep '(ipip|vti)'
[root@vm ~]# ip tunnel add mode vti ikey 1
[root@vm ~]# lsmod | egrep '(ipip|vti)'
ip_vti 5258 0
ip_tunnel 9295 1 ip_vti
[root@vm ~]# ip tunnel show
vti0: ip/ip remote any local any ttl inherit ikey 1 okey 0
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
[root@vm ~]# ip tunnel add mode vti remote 1.2.3.4 ikey 2
[root@vm ~]# ip tunnel show
vti0: ip/ip remote any local any ttl inherit ikey 1 okey 0
vti1: ip/ip remote 1.2.3.4 local any ttl inherit ikey 2 okey 0
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
# Vti tunnels are created as expected
# * If you have unpatched kernel your vti tunnels will have ikey == okey == 0
Same story exists with ip tunnel show/del with non-zero [io]key: requests are
routed to tunl0 instead of ip_vti0.
Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
Not sure how these typos slipped in back then, I suspect
too much coffee. ;) So lets fix them up properly.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Though nlmon device can be added, it was not listed
in the output of "ip link help".
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
This patch adds master dev name from NDA_MASTER netlink attribute
to bridge fdb show output
current iproute2 tries to print 'master' in the output if NTF_MASTER
is present. But, kernel today does not set NTF_MASTER during dump
requests. Which means I have not seen iproute2 bridge cmd print 'master' atall.
This patch overrides the NTF_MASTER flag if NDA_MASTER attribute is present.
Example output:
before this patch:
# bridge fdb show
44:38:39:00:27:ba dev bond2.2003 permanent
44:38:39:00:27:bb dev bond4.2003 permanent
44:38:39:00:27:bc dev bond2.2004 permanent
After this patch:
# bridge fdb show
44:38:39:00:27:ba dev bond2.2003 master br-2003 permanent
44:38:39:00:27:bb dev bond4.2003 master br-2003 permanent
44:38:39:00:27:bc dev bond2.2004 master br-2004 permanent
For comparision with the above, below is the output for NTF_SELF today,
# bridge fdb show
33:33:00:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth0 self permanent
33:33:ff:00:01:cc dev eth0 self permanent
If change in output is a concern, 'master' can be put at the end of the fdb
output line or made optional with -d[etails] option.
change from v1 to v2:
use 'bridge' instead of 'master' in fdb show output
change from v2 to v3:
use 'master' instead of 'bridge' in fdb show output
(master could also be a vxlan device)
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
o "min_tx_rate" option has been added for minimum Tx rate. Hence, for
consistent naming, "max_tx_rate" option has been introduced for maximum
Tx rate.
o Change in v2: "rate" can be used along with "max_tx_rate".
When both are specified, "max_tx_rate" should override.
o Change in v3:
* IFLA_VF_RATE: When IFLA_VF_RATE is used, and user has given only one of
min_tx_rate or max_tx_rate, reading of previous rate limits is done in
userspace instead of in kernel space before ndo_set_vf_rate.
* IFLA_VF_TX_RATE: When IFLA_VF_TX_RATE is used, min_tx_rate is always read
in kernel space. This takes care of below scenarios:
(1) when old tool sends "rate" but kernel is new (expects min and max)
(2) when new tool sends only "rate" but kernel is old (expects only "rate")
o Change in v4 as suggested by Stephen Hemminger:
* As per iproute policy, input and output formats should match. Changing display
of max_tx_rate and min_tx_rate options accordingly.
./ip/ip link show p3p1
8: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0e:1e:16:ce:40 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 2a:18:8f:4d:3d:d4, tx rate 700 (Mbps), max_tx_rate 700Mbps, min_tx_rate 200Mbps
vf 1 MAC 72:dc:ba:f9:df:fd
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Michael Tautschnig wrote:
During a rebuild [...]. Please note that we use our research
compiler tool-chain (using tools from the cbmc package), which permits extended
reporting on type inconsistencies at link time.
[...]
gcc bridge.o fdb.o monitor.o link.o mdb.o vlan.o ../lib/libnetlink.a ../lib/libutil.a ../lib/libnetlink.a ../lib/libutil.a -o bridge
file link.c line 18: error: conflicting types for variable "filter_index"
old definition in module fdb file fdb.c line 29
signed int
new definition in module link file link.c line 18
unsigned int
<builtin>: recipe for target 'bridge' failed
make[3]: *** [bridge] Error 64
make[3]: Leaving directory '/srv/jenkins-slave/workspace/sid-goto-cc-iproute2/iproute2-3.14.0/bridge'
Makefile:45: recipe for target 'all' failed
While practical constraints may limit the value of filter_index to remain within
the bounds of a positive signed int, there is certainly no such guarantee here.
Also, a plain majority vote suggests that this really just a wrong declaration
in link.c as several declarations of filter_index as signed int exist.
[...]
My followup on this was:
I think the majority is wrong.
filter_index is assigned exclusively from if_nametoindex or ll_name_to_index
which both return unsigned int.
Changing it to unsigned everywhere seems better.
This has been minimally tested by using the bridge tool
to add vids and showing available vids on different devices.
Reported-by: Michael Tautschnig <mt@debian.org>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
When we create a tunnel on top of a link and the link specified
in cmdline doesn't exist, an error message should be shown.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Since linux-3.15, kernel exports tcpi_pacing_rate and
tcpi_max_pacing_rate in tcp_info
Add TCP pacing_rate information on ss -i output :
lpaa23:~# ./ss -ti dst 10.246.7.151
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 0 325800 10.246.7.151:57614
10.246.7.152:46811
cubic wscale:7,7 rto:201 rtt:0.081/0.006 mss:1448 cwnd:90 ssthresh:63
send 12871.1Mbps pacing_rate 15397.8Mbps unacked:90 retrans:0/305
rcv_space:29200
If SO_MAX_PACING_RATE is set on the socket, we add /max_pacing_rate as
in :
... pacing_rate 1570.5Mbps/2.0Gbps ...
Signed-off-by: Eric Dumazet <edumazet@google.com>
When limit<burst latency becomes <0, for example:
# tc qdisc add dev eth0 root handle 1: tbf limit 100K burst 256K rate 256kbit
# tc qdisc show
qdisc tbf 1: dev eth0 root refcnt 2 rate 256Kbit burst 256Kb lat 4290.0s
If latency<0 there is no reason to show it. Limit will be printed instead of
latency when latency<0:
# tc qdisc show
qdisc tbf 1: dev eth0 root refcnt 2 rate 256Kbit burst 256Kb limit 100Kb
Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
Controller Area Network (CAN) interfaces are physical network interfaces.
They can't be 'created' like software devices by 'ip link add type can'.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
This also fixes a long standing bug of not sanely reporting the
action chain ordering
Sample scenario test
on window 1(event window):
run "tc monitor" and observe events
on window 2:
sudo tc actions add action drop index 10
sudo tc actions add action ok index 12
sudo tc actions ls action gact
sudo tc actions flush action gact
See the event window reporting two entries
(doing another listing should show empty generic actions)
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
We need limits.h for LONG_MIN and LONG_MAX, sys/param.h for MIN and
sys/select for struct timeval.
This fixes the following compile errors with musl libc:
f_bpf.c: In function 'bpf_parse_opt':
f_bpf.c:181:12: error: 'LONG_MIN' undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
...
tc_util.o: In function `print_tcstats2_attr':
tc_util.c:(.text+0x13fe): undefined reference to `MIN'
tc_util.c:(.text+0x1465): undefined reference to `MIN'
tc_util.c:(.text+0x14ce): undefined reference to `MIN'
tc_util.c:(.text+0x154c): undefined reference to `MIN'
tc_util.c:(.text+0x160a): undefined reference to `MIN'
tc_util.o:tc_util.c:(.text+0x174e): more undefined references to `MIN' follow
...
tc_stab.o: In function `print_size_table':
tc_stab.c:(.text+0x40f): undefined reference to `MIN'
...
fdb.c:247:30: error: 'ULONG_MAX' undeclared (first use in this function)
(vni >> 24) || vni == ULONG_MAX)
^
lnstat.h:28:17: error: field 'last_read' has incomplete type
struct timeval last_read; /* last time of read */
^
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
BUG: tc filter show ... produce a segmentation fault if more than one
filter rule with action -j MARK exists.
Reason: In print_ipt(...) xtables will be initialzed with a
pointer to the static struct tcipt_globals at xtables_init_all().
Later on the fields .opts and .options_offset of tcipt_globals are
modified. The call of xtables_free_opts(1) at the end of print(...)
does not restore the original values of tcipt_globals for the
modified fields. It only frees some allocated memory and sets
.opts to NULL. This leads to a segmentation fault when print_ipt()
is called for the next filter rule with action -j MARK.
Fix: Cloneing tcipt_globals on the stack as tmp_tcipt_globals and
use it instead of tcipt_globals, so tcipt_globals will be not
modified.
Signed-off-by: Andreas Greve <andreas.greve@a-greve.de>
The display of the entire netem loss state is shown as if it
were gemodel state, as the loss state information is assigned to the
wrong pointer. Correct this by assigning the loss state to the correct
pointer.
Additionally, attempting to set netem loss state will result in
random values in the p14 state probability because the option value
passed to the kernel by tc netem is not parsed or initialized. Fix this
by supplying a default value of 0 for p14 and parsing the p14 value if
one is supplied.
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
For CAN FD a new set of bittiming configuration and enabling functions for the
data section is provided by the CAN driver infrastructure.
This patch allows to configure the newly introduced CAN FD properties.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
When preparing a patch for CAN FD support these white space issues showed up.
Fix it in the current code to be able to provide a proper follow up patch.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Kernel is being extended to support flag IFA_F_MANAGETEMPADDR also for
deletion of addresses. This will allow a userspace application to indicate
that for a global address the kernel should delete all related temporary
addresses as well.
"ip addr del" internally calls ipaddr_modify which silently accepts
any flag provided on the command line already, independent of the
actual command.
Therefore only the usage documentation needs to be extended.
Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de>
commit 37c9b94ed2 (add support for extended ifa_flags)
introduced a regression:
# ./ip/ip addr add 192.168.0.1/24 dev eth0
RTNETLINK answers: Invalid argument
This is due to old kernels don't support IFA_FLAGS flag, we should not
use it if we don't use the flags beyond old .ifa_flags.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Flags for a peer override flags for the other and not used for the
peer.
before:
# ip link add up type veth peer down multicast off
# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 2e:5c:cd:f5:63:d2 brd ff:ff:ff:ff:ff:ff
3: veth1: <BROADCAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 72:b0:fa:1e:76:7a brd ff:ff:ff:ff:ff:ff
after:
# ip link add up type veth peer down multicast off
# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: veth0: <BROADCAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 6e:db:03:b3:bd:ff brd ff:ff:ff:ff:ff:ff
3: veth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether a6:62:d9:84:f0:73 brd ff:ff:ff:ff:ff:ff
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
It's now possible to filter SA directly into the kernel by specifying
XFRMA_PROTO and/or XFRMA_ADDRESS_FILTER.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Rami Rosen
Dmitry Popov
Vasily Averin
Daniel Borkmann
vadimk
Masatake YAMATO
Stephen Hemminger
Roopa Prabhu
Sucheta Chakraborty
Jiri Pirko
Yang Yingliang
Andreas Henriksson
Cong Wang
Eric Dumazet
Vlad Yasevich
Sergey V. Lobanov
Oliver Hartkopp
Jamal Hadi Salim
Natanael Copa
Andreas Greve
Or Gerlitz
Mike Rapoport
david decotigny
Terry Lam
Jay Vosburgh
Heiner Kallweit
Kusanagi Kouichi
Nicolas Dichtel