Follow the precedent of other parts of iproute2 follow the example of:
Standard libc headers
Linux headers
Iproute2 support headers
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The 'fw_load_policy' devlink parameter supports the 'disk' value
since kernel v5.4, seems like there was some oversight in adding
this to iproute, fixed by this patch.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When setting a policer to a trap group, a value of "0" will unbind the
currently bound policer from the group.
The behavior is intentional and tested in kernel selftests, so document
it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add the new "mpls" keyword that can be used to match MPLS fields in
arbitrary Label Stack Entries.
LSEs are introduced by the "lse" keyword and followed by LSE options:
"depth", "label", "tc", "bos" and "ttl". The depth is manadtory, the
other options are optionals.
For example, the following filter drops MPLS packets having two labels,
where the first label is 21 and has TTL 64 and the second label is 22:
$ tc filter add dev ethX ingress proto mpls_uc flower mpls \
lse depth 1 label 21 ttl 64 \
lse depth 2 label 22 bos 1 \
action drop
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Bareudp devices provide a generic L3 encapsulation for tunnelling
different protocols like MPLS, IP, NSH, etc. inside a UDP tunnel.
This patch is based on original work from Martin Varghese:
https://lore.kernel.org/netdev/1570532361-15163-1-git-send-email-martinvarghesenokia@gmail.com/
Examples:
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc
This creates a bareudp tunnel device which tunnels L3 traffic with
ethertype 0x8847 (unicast MPLS traffic). The destination port of the
UDP header will be set to 6635. The device will listen on UDP port 6635
to receive traffic.
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto
Same as the MPLS example, but for IPv4. The "multiproto" keyword allows
the device to also tunnel IPv6 traffic.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before this patch check is happened only in case when we try to find
cgroup at cgroup2 mount point.
v2:
- add Fixes line before Signed-off-by (David Ahern)
Fixes: d5e6ee0dac ("ss: introduce cgroup2 cache and helper functions")
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ip(8) accepts -family ipv6 (-6) option at the toplevel. It is
straightforward to support the existing option for modifying listener
on IPv6 addresses.
Maintain the backward compatibility by leaving ip fou -6 flag
implemented, while it's removed from the usage message.
Signed-off-by: Sorah Fukumori <her@sorah.jp>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before can be possible show only all qeueue disciplines on an interface.
There wasn't a way to get the qdisc info by handle or parent, only full
dump of the disciplines with a following grep/sed usage.
Now new and old options work as expected to filter a qdisc by handle or
parent.
Full syntax of the qdisc show command:
tc qdisc { show | list } [ dev STRING ] [ QDISC_ID ] [ invisible ]
QDISC_ID := { root | ingress | handle QHANDLE | parent CLASSID }
This change doesn't require any changes in the kernel.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single font macro for a single argument.
Remove unnecessary quotes for a single-font macro.
Join two lines into one.
The output of "nroff" and "groff" is unchanged.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for one argument.
Remove unnecessary quotes for a single font macro.
Join some lines into one.
The output of "nroff" and "groff" is unchanged, except for a font
change in two lines.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for a single argument
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use a single-font macro for a single argument.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Typeset section numbers in roman font, see man-pages(7).
###
Details:
Output is from: test-groff -b -mandoc -T utf8 -rF0 -t -w w -z
[ "test-groff" is a developmental version of "groff" ]
<./man/man3/libnetlink.3>:53 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:132 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:134 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:197 (macro BR): only 1 argument, but more are expected
<./man/man3/libnetlink.3>:198 (macro BR): only 1 argument, but more are expected
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
On some distros, i.e. rhel 7.6, compilation fails with the following:
ipaddress.c: In function ‘lookup_flag_data_by_name’:
ipaddress.c:1260:2: error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < ARRAY_SIZE(ifa_flag_data); ++i) {
^
ipaddress.c:1260:2: note: use option -std=c99 or -std=gnu99 to compile your code
This commit fixes the single place needed for compilation to pass.
Fixes: 9d59c86e57 ("iproute2: ip addr: Organize flag properties structurally")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.
Example:
# devlink -jp trap show netdevsim/netdevsim10 trap igmp_v1_report
{
"trap": {
"netdevsim/netdevsim10": [ {
"name": "igmp_v1_report",
"type": "control",
"generic": true,
"action": "trap",
"group": "mc_snooping"
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use the tool iwyu to get more complete list of includes for
all the bits used by devlink.
This should also fix build with musl libc.
Fixes: c4dfddccef ("fix JSON output of mon command")
Reported-off-by: Dan Robertson <dan@dlrobertson.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Actually display that deletions are happening
when monitoring nexthops.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
optimistic DAD is controllable via sysctl for an interface
or all interfaces on the system. This would affect addresses
added by the kernel only.
Recent kernels, however, have enabled support for adding optimistic
address via userspace. This plumbs that support.
Signed-off-by: David Ahern <dsahern@gmail.com>
This creates a nice systematic way to check that the various flags are
mutable from userspace and that the address family is valid.
Mutability properties are preserved to avoid introducing any behavioral
change in this CL. However, previously, immutable flags were ignored and
fell through to this confusing error:
Error: either "local" is duplicate, or "dadfailed" is a garbage.
But now, they just warn more explicitly:
Warning: dadfailed option is not mutable from userspace
Signed-off-by: David Ahern <dsahern@gmail.com>
Have print_tm() dump firstuse value along with install, lastuse
and expires.
v2: Resubmit after 'master' merged into next
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
gcc v9.3.1 reports:
bpf.c: In function ‘bpf_get_work_dir’:
bpf.c:784:49: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
784 | snprintf(bpf_wrk_dir, sizeof(bpf_wrk_dir), "%s/", mnt);
| ^
bpf.c:784:2: note: ‘snprintf’ output between 2 and 4097 bytes into a destination of size 4096
784 | snprintf(bpf_wrk_dir, sizeof(bpf_wrk_dir), "%s/", mnt);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this simply checking snprintf return code and properly handling the error.
Fixes: e42256699c ("bpf: make tc's bpf loader generic and move into lib")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This reverts commit c0325b0638.
It introduces a segfault in bpf_make_custom_path() when custom pinning is used.
This happens because asprintf allocates exactly the space needed to hold a
string in the buffer passed as its first argument, but if this buffer is later
used in strcat() or similar we have a buffer overrun.
As the aim of commit c0325b0638 is simply to fix a compiler warning, it
seems safe and reasonable to revert it.
Fixes: c0325b0638 ("bpf: replace snprintf with asprintf when dealing with long buffers")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This commit allows printing the statistics of a broadcast-receiver link
using the same tipc command, but with additional 'link' options:
$ tipc link stat show --help
Usage: tipc link stat show [ link { LINK | SUBSTRING | all } ]
With:
+ 'LINK' : print the stats of the specific link 'LINK';
+ 'SUBSTRING' : print the stats of all the links having the 'SUBSTRING'
in name;
+ 'all' : print all the links' stats incl. the broadcast-receiver
ones;
Also, a link stats can be reset in the usual way by specifying the link
name in command.
For example:
$ tipc l st sh l br
Link <broadcast-link>
Window:50 packets
RX packets:0 fragments:0/0 bundles:0/0
TX packets:5011125 fragments:4968774/149643 bundles:38402/307061
RX naks:781484 defs:0 dups:0
TX naks:0 acks:0 retrans:330259
Congestion link:50657 Send queue max:0 avg:0
Link <broadcast-link:1001001>
Window:50 packets
RX packets:95146 fragments:95040/1980 bundles:1/2
TX packets:0 fragments:0/0 bundles:0/0
RX naks:380938 defs:83962 dups:403
TX naks:8362 acks:0 retrans:170662
Congestion link:0 Send queue max:0 avg:0
Link <broadcast-link:1001002>
Window:50 packets
RX packets:0 fragments:0/0 bundles:0/0
TX packets:0 fragments:0/0 bundles:0/0
RX naks:400546 defs:0 dups:0
TX naks:0 acks:0 retrans:159597
Congestion link:0 Send queue max:0 avg:0
$ tipc l st sh l 1001002
Link <1001003:data0-1001002:data0>
ACTIVE MTU:1500 Priority:10 Tolerance:1500 ms Window:50 packets
RX packets:99546 fragments:0/0 bundles:33/877
TX packets:629 fragments:0/0 bundles:35/828
TX profile sample:8 packets average:390 octets
0-64:75% -256:0% -1024:0% -4096:25% -16384:0% -32768:0% -66000:0%
RX states:488714 probes:7397 naks:0 defs:4 dups:5
TX states:27734 probes:18016 naks:5 acks:2305 retrans:0
Congestion link:0 Send queue max:0 avg:0
Link <broadcast-link:1001002>
Window:50 packets
RX packets:0 fragments:0/0 bundles:0/0
TX packets:0 fragments:0/0 bundles:0/0
RX naks:400546 defs:0 dups:0
TX naks:0 acks:0 retrans:159597
Congestion link:0 Send queue max:0 avg:0
$ tipc l st re l broadcast-link:1001002
$ tipc l st sh l broadcast-link:1001002
Link <broadcast-link:1001002>
Window:50 packets
RX packets:0 fragments:0/0 bundles:0/0
TX packets:0 fragments:0/0 bundles:0/0
RX naks:0 defs:0 dups:0
TX naks:0 acks:0 retrans:0
Congestion link:0 Send queue max:0 avg:0
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for rpl segment routing settings.
Example:
ip -n ns0 -6 route add 2001::3 encap rpl segs \
fe80::c8fe:beef:cafe:cafe,fe80::c8fe:beef:cafe:beef dev lowpan0
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Report tcf_t values in seconds, not jiffies, in JSON format as it is now
for stdout.
v2: use PRINT_ANY, drop the useless casts and fix the style (Stephen Hemminger)
Fixes: 2704bd6255 ("tc: jsonify actions core")
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Provide a sanity check that will make sure whether queues count/offset
pair count will not exceed the actual number of TCs being created.
Example command that is invalid because there are 4 count/offset pairs
whereas num_tc is only 2.
# tc qdisc add dev enp96s0f0 root mqprio num_tc 2 map 0 0 0 0 1 1 1 1
queues 4@0 4@4 4@8 4@12 hw 1 mode channel
Store the parsed count/offset pair count onto a dedicated variable that
will be compared against opt.num_tc after all of the command line
arguments were parsed. Bail out if this count is higher than opt.num_tc
and let user know about it.
Drivers were swallowing such commands as they were iterating over
count/offset pairs where num_tc was used as a delimiter, so this is not
a big deal, but better catch such misconfiguration at the command line
argument parsing level.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
As noted by David Ahern, now if some bytecode filter is not supported
by running kernel printed error message is not clear. This patch is attempt to
detect such case and print correct message. This is done by providing checking
function for new filter types. As example check function for cgroup filter
is implemented. It sends correct lightweight request (idiag_states = 0)
with zero cgroup condition to the kernel and checks returned errno. If filter
is not supported EINVAL is returned. Result of checking is cached to
avoid extra checks if several same filters are specified.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch introduces two new features: obtaining cgroup information and
filtering sockets by cgroups. These features work based on cgroup v2 ID
field in the socket (kernel should be compiled with CONFIG_SOCK_CGROUP_DATA).
Cgroup information can be obtained by specifying --cgroup flag and now contains
only pathname. For faster pathname lookups cgroup cache is implemented. This
cache is filled on ss startup and missed entries are resolved and saved
on the fly.
Cgroup filter extends EXPRESSION and allows to specify cgroup pathname
(relative or absolute) to obtain sockets attached only to this cgroup.
Filter syntax: ss [ cgroup PATHNAME ]
Examples:
ss -a cgroup /sys/fs/cgroup/unified (or ss -a cgroup .)
ss -a cgroup /sys/fs/cgroup/unified/cgroup1 (or ss -a cgroup cgroup1)
v2:
- style fixes (David Ahern)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch prepares infrastructure for matching sockets by cgroups.
Two helper functions are added for transformation between cgroup v2 ID
and pathname. Cgroup v2 cache is implemented as hash table indexed by ID.
This cache is needed for faster lookups of socket cgroup.
v2:
- style fixes (David Ahern)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce a ingress frame gate control flow action.
Tc gate action does the work like this:
Assume there is a gate allow specified ingress frames can pass at
specific time slot, and also drop at specific time slot. Tc filter
chooses the ingress frames, and tc gate action would specify what slot
does these frames can be passed to device and what time slot would be
dropped.
Tc gate action would provide an entry list to tell how much time gate
keep open and how much time gate keep state close. Gate action also
assign a start time to tell when the entry list start. Then driver would
repeat the gate entry list cyclically.
For the software simulation, gate action require the user assign a time
clock type.
Below is the setting example in user space. Tc filter a stream source ip
address is 192.168.0.20 and gate action own two time slots. One is last
200ms gate open let frame pass another is last 100ms gate close let
frames dropped.
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 parent ffff: protocol ip \
flower src_ip 192.168.0.20 \
action gate index 2 clockid CLOCK_TAI \
sched-entry open 200000000ns -1 8000000b \
sched-entry close 100000000ns
# tc chain del dev eth0 ingress chain 0
"sched-entry" follow the name taprio style. Gate state is
"open"/"close". Follow the period nanosecond. Then next -1 is internal
priority value means which ingress queue should put to. "-1" means
wildcard. The last value optional specifies the maximum number of
MSDU octets that are permitted to pass the gate during the specified
time interval, the overlimit frames would be dropped.
Below example shows filtering a stream with destination mac address is
10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate
action would run with one close time slot which means always keep close.
The time cycle is total 200000000ns. The base-time would calculate by:
1357000000000 + (N + 1) * cycletime
When the total value is the future time, it will be the start time.
The cycletime here would be 200000000ns for this case.
#tc filter add dev eth0 parent ffff: protocol ip \
flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \
action gate index 12 base-time 1357000000000ns \
sched-entry CLOSE 200000000ns \
clockid CLOCK_TAI
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
My latest patch missed the fact that this file got JSON support.
Also fixes a spelling error added during JSON change.
Fixes: be9ca9d541 ("tc: fq: add timer_slack parameter")
Fixes: d15e2bfc04 ("tc: fq: add support for JSON output")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Display kilobit with the standard suffix.
Add comment to describe where data rate suffixes come from.
Add support for terrabit.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make ID argument optional and read the snapshot info
that kernel sends us.
$ devlink region new netdevsim/netdevsim1/dummy
netdevsim/netdevsim1/dummy: snapshot 0
$ devlink -jp region new netdevsim/netdevsim1/dummy
{
"regions": {
"netdevsim/netdevsim1/dummy": {
"snapshot": [ 1 ]
}
}
}
$ devlink region show netdevsim/netdevsim1/dummy
netdevsim/netdevsim1/dummy: size 32768 snapshot [0 1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Also use 'g' specifier instead of 'f' to remove trailing zeros,
and increase precision.
Examples of output :
Before After
8.0Kbps 8Kbps
9.9Mbps 9.92Mbps
55001Mbps 55Gbps
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Import rpl.h and rpl_iptunnel.h as of kernel commit:
354d86141796 ("Merge branch 'net-reduce-dynamic-lockdep-keys'")
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger
Louis Peens
Ido Schimmel
Guillaume Nault
Dmitry Yakunin
Sorah Fukumori
Anton Danilov
Bjarni Ingi Gislason
Roi Dayan
Donald Sharp
Ian K. Coolidge
Roman Mashak
Andrea Claudi
David Ahern
Tuong Lien
Alexander Aring
Eric Dumazet
Paul Blakey
Maciej Fijalkowski
Po Liu
Jakub Kicinski