In kernel commit 8cb081746c03 ("netlink: make validation more configurable
for future strictness"), Linux started implicitly flagging nests with
NLA_F_NESTED, unless the nest is created with nla_nest_start_noflag().
The ETS code uses nla_nest_start() where possible, so it does not work with
the current iproute2 code. Have libnetlink catch up by admitting the flag
in the attribute.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The kernel now signals the offload state of a route using the
'RTM_F_OFFLOAD' and 'RTM_F_TRAP' flags. Print these to help users
understand the offload state of each route. The "rt_" prefix is used in
order to distinguish it from the offload state of nexthops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit
9aaa29494030 ("Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue")
Signed-off-by: David Ahern <dsahern@gmail.com>
This change fixes calculation of width in case user pipes the output.
SS output output works correctly when stdout is a terminal. When one
pipes the output, it tries to use 80 or 160 columns. That adds a
line-break if user has terminal width of 100 chars and output is of
the similar width. No width is assumed here.
To reproduce the issue, call
ss | less
and see every other line empty if your screen is between 80 and 160
columns wide.
This second version of the patch fixes screen_width being set to arbitrary
value.
Signed-off-by: Peter Junos <petoju@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The 802.3ad/LACP actor/partner operating states are only printed as
numbers, e.g,
ad_actor_oper_port_state 15
Add an additional output in ip link show that prints a string describing
the individual 3ad bit meanings in the following way:
ad_actor_oper_port_state_str <active,short_timeout,aggregating,in_sync>
JSON output is also supported, the field becomes a json array:
"ad_actor_oper_port_state_str":
["active","short_timeout","aggregating","in_sync"]
Signed-off-by: Andy Roulin <aroulin@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
fe23d63422c8 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Signed-off-by: David Ahern <dsahern@gmail.com>
Enable proper JSON output for the TBF Qdisc.
Also, fix the style of the statement that's calculating "latency" in
tbf_print_opt().
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the SFQ Qdisc.
Use the long double format specifier to print the value of
"probability".
Also, fix the indentation in the online output of the contents in the
tc_sfqred_stats structure.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the SFB Qdisc.
Make the output for options "rehash" and "db" explicit.
Use the long double format specifier to print probability values.
Use sprint_time() to print time values.
Also, fix the indentation in sfb_print_opt().
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the PIE Qdisc.
Use sprint_time() to print the value of tc_pie_xstats->delay.
Use the long double format specifier to print tc_pie_xstats->prob.
Also, fix the indentation in the oneline output of statistics and update
the man page to reflect this change.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the HHF Qdisc.
Also, use sprint_size() to print size values.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the FQ Qdisc.
Use the "KEY VALUE" format for oneline output of statistics instead of
"VALUE KEY", and remove unnecessary commas from the output.
Use sprint_size() to print size values in fq_print_opt().
Use sprint_time64() to print time values in fq_print_xstats().
Also, update the man page to reflect the changes in the output format.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the choke Qdisc.
Also, use the long double format specifier to print the value of
"probability".
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Enable proper JSON output for the CBS Qdisc.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
if_id is u32, error on -ve values instead of setting to 0
after :
ip link add ipsec1 type xfrm dev lo if_id -10
Error: argument "-10" is wrong: if_id value is invalid
before : note xfrm if_id 0
ip link add ipsec1 type xfrm dev lo if_id -10
ip -d link show dev ipsec1
9: ipsec1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Fixes: 286446c1e8 ("ip: support for xfrm interfaces")
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for the BRIDGE_XSTATS_STP xstats, as follow:
# ip link xstats type bridge_slave dev lan4 stp
lan4
STP BPDU: RX: 0 TX: 61
STP TCN: RX: 0 TX: 0
STP Transitions: Blocked: 2 Forwarding: 1
Or below as JSON:
# ip -j -p link xstats type bridge_slave dev lan0 stp
[ {
"ifname": "lan0",
"stp": {
"rx_bpdu": 0,
"tx_bpdu": 500,
"rx_tcn": 0,
"tx_tcn": 0,
"transition_blk": 0,
"transition_fwd": 0
}
} ]
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Display permanent hardware address of an interface in output of
"ip link show" and "ip addr show". To reduce noise, permanent address is
only shown if it is different from current one.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce a new attribute representing a new time-stamp format: current
time in ns (to comply with y2038) instead of jiffies. If the new
attribute was received, translate the time-stamp accordingly (ns).
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add pr_out_dump_reporter prefix to the helper function's name and
encapsulate the print in it.
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
repeats for "vlan tunnelshow" what commit 0f36267485 ("bridge: fix vlan
show formatting") did for "vlan show". This fixes problems in json output.
Note that the resulting json output format of "vlan tunnelshow" is not the
same as the original, introduced in commit 8652eeb3ab ("bridge: vlan:
support for per vlan tunnel info"). Changes similar to the ones done for
"vlan show" in commit 0f36267485 ("bridge: fix vlan show formatting") are
carried over to "vlan tunnelshow".
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Fixes: 0f36267485 ("bridge: fix vlan show formatting")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_vlan() and print_vlan_tunnel() are almost identical copies, save for
a missing newline in the latter which leads to broken output of "vlan
tunnelshow" in normal mode.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit c7c1a1ef51 ("bridge: colorize output and use JSON print
library"), print_range() is used for vid (16bits) and vni. However, the
latter are 32bits so they get truncated. They got truncated even before
that commit though.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As per the kernel's vlan_tunnel_policy, IFLA_BRIDGE_VLAN_TUNNEL_VID and
IFLA_BRIDGE_VLAN_TUNNEL_FLAGS have type NLA_U16.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
"SRC VNI" is only one argument and should appear as such. Moreover, this
argument to the src_vni option is documented under three forms: "SRC_VNI",
"SRC VNI" and "VNI" in different places. Consistenly use the simplest form,
"VNI".
Fixes: c5b176e5ba ("bridge: fdb: add support for src_vni option")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
a substring match is not enough, ex: 10 != 1
Fixes: 30383b074d ("tests: Add output testing")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 6377572f0a ("ip: ip_print: add new API to print JSON or regular format output")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
it allows to specify also the table name in addition to the table number in
SRv6 End.DT* behaviors.
To add an End.DT6 behavior route specifying the table by name:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table main dev eth0
The ip route show to print output this route:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT6 table main dev eth0 metric 1024 pref medium
The JSON output:
$ ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6local",
"action": "End.DT6",
"table": "main",
"dev": "eth0",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
In oneline mode the line seperator should be \
but several parts of tc aren't doing it right.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
The previous change to ss to show header broke the printing of
end-of-line for the last entry.
Tested:
diff <(./ss.old -nltp) <(misc/ss -nltp)
38c38
< LISTEN 0 128 [::1]:35417 [::]:* users:(("foo",pid=65254,fd=116))
\ No newline at end of file
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Warning was:
q_pie.c:202:22: error: implicit conversion from 'unsigned long' to
'double'
Fixes: 492ec9558b ("tc: pie: change maximum integer value of tc_pie_xstats->prob")
Cc: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PIE now uses per packet timestamps to calculate queuing
delay. The average dequeue rate based queue delay
calculation is now made optional. This patch adds the option
to enable or disable the use of Little's law to calculate
queuing delay.
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Two new commands are added as part of 'tipc node' command:
$tipc node set key KEY [algname ALGNAME] [nodeid NODEID]
$tipc node flush key
which enable user to set and remove AEAD keys in kernel TIPC (requires
the kernel option - 'TIPC_CRYPTO').
For the 'set key' command, the given 'nodeid' parameter decides the
mode to be applied to the key, particularly:
- If NODEID is empty, the key is a 'cluster' key which will be used for
all message encryption/decryption from/to the node (i.e. both TX & RX).
The same key will be set in the other nodes.
- If NODEID is own node, the key is used for message encryption (TX)
from the node. Whereas, if NODEID is a peer node, the key is for
message decryption (RX) from that peer node. This is the 'per-node-key'
mode that each nodes in the cluster has its specific (TX) key.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: David Ahern <dsahern@gmail.com>
Add functions for big endian masked numbers as a pre-step towards masked
port numbers.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add u16 big endian parse option as a pre-step towards TCP/UDP/SCTP
ports usage.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Petr Machata
Ido Schimmel
David Ahern
Peter Junos
Andy Roulin
Leslie Monis
Stephen Hemminger
Antony Antony
Vivien Didelot
Michal Kubecek
Aya Levin
Benjamin Poirier
Paolo Lungaroni
Brian Vazquez
Bjarni Ingi Gislason
Gautam Ramakrishnan
Eric Dumazet
Tuong Lien
Eli Britstein