Parav Pandit says:
====================
This patchset implements devlink port add, delete and function state
management commands.
An example sequence for a PCI SF:
Set the device in switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
View ports in switchdev mode:
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 s=
plittable false
Add a subfunction port for PCI PF 0 with sfnumber 88:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfn=
um 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
Show a newly added port:
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf contro=
ller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
Set the function state to active:
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:8=
8 state active
Show the port in JSON format:
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Set the function state to active:
$ devlink port function set pci/0000:06:00.0/32768 state inactive
Delete the port after use:
$ devlink port del pci/0000:06:00.0/32768
====================
Signed-off-by: David Ahern <dsahern@kernel.org>
Support set operation of the devlink port function state.
Example of a PCI SF port function which supports the state:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Print port function state and operational state whenever reported by
kernel.
Example of a PCI SF port function which supports the state:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "inactive",
"opstate": "detached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Enable user to add and delete the devlink port.
Examples for adding and deleting one SF port:
Examples of add, show and delete commands:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
Add devlink port of flavour 'pcipf' for PF number 0 SF number 88:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
Delete newly added devlink port
$ devlink port del pci/0000:06:00.0/32768
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Introduce PCI SF port flavour and port attributes such as PF
number and SF number.
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Instead of using static mapping in code, introduce a helper routine to
map a value to string.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The len8_dlc element is filled by the CAN interface driver and used for CAN
frame creation by the CAN driver when the CAN_CTRLMODE_CC_LEN8_DLC flag is
supported by the driver and enabled via netlink configuration interface.
Add the command line support for cc-len8-dlc for Linux 5.11+
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Petr Machata says:
====================
Add support to the dcb tool for the following two DCB objects:
- APP, which allows configuration of traffic prioritization rules based on
several possible packet headers.
- DCBX, which is a 1-byte bitfield of flags that configure whether the DCBX
protocol is implemented in the device or in the host, and which version
of the protocol should be used.
Patch #1 adds a new helper for finding a name of a given dsfield value.
This is useful for APP DSCP-to-priority rules, which can use human-readable
DSCP names.
Patches #2, #3 and #4 extend existing interfaces for, respectively, parsing
of the X:Y mappings, for setting a DCB object, and for getting a DCB
object.
In patch #5, support for the command line argument -N / --Numeric is
added. The APP tool later uses it to decide whether to format DSCP values
as human-readable strings or as plain numbers.
Patches #6 and #7 add the subtools themselves and their man pages.
v2:
- Two patches dropped and sent to iproute2 branch as "dcb: Fixes".
This patch set now depends on that one.
- Patch #5:
- Make it -N / --Numeric instead of -n / --no-nice-names
- Rename the flag from no_nice_names to numeric as well
- Patch #6:
- Adjust to s/no_nice_names/numeric/ from another patch.
====================
Signed-off-by: David Ahern <dsahern@kernel.org>
The Linux DCBX object is a 1-byte bitfield of flags that configure whether
the DCBX protocol is implemented in the device or in the host, and which
version of the protocol should be used. Add a tool to access the per-port
Linux DCBX object.
For example:
# dcb dcbx set dev eni1np1 host ieee
# dcb dcbx show dev eni1np1
host ieee
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
DCB APP interfaces are standardized in 802.1q-2018, and allow configuration
of traffic prioritization rules based on several possible headers.
Add a dcb subtool for maintenance and display of the APP table. For
example:
# dcb app add dev eni1np1 dscp-prio 0:0 CS3:3 CS6:6
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS6:6
# dcb app add dev eni1np1 dscp-prio CS3:4
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:3 CS3:4 CS6:6
# dcb app replace dev eni1np1 dscp-prio CS3:5
# dcb app show dev eni1np1
dscp-prio 0:0 CS3:5 CS6:6
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Some DSCP values can be translated to symbolic names. That may not be
always desirable. Introduce a command-line option similar to other tools,
-N or --Numeric, to suppress this translation.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
The function dcb_get_attribute() assumes that the caller knows the exact
size of the looked-for payload. It also assumes that the response comes
wrapped in an DCB_ATTR_IEEE nest. The former assumption does not hold for
the IEEE APP table, which has variable size. The latter one does not hold
for DCBX, which is not IEEE-nested, and also for any CEE attributes, which
would come CEE-nested.
Factor out the payload extractor from the current dcb_get_attribute() code,
and put into a helper. Then rewrite dcb_get_attribute() compatibly in terms
of the new function. Introduce dcb_get_attribute_va() as a thin wrapper for
IEEE-nested access, and dcb_get_attribute_bare() for access to attributes
that are not nested.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
The function dcb_set_attribute() takes a fully-formed payload as an
argument. For callers that need to build a nested attribute, such as is the
case for DCB APP table, this is not great, because with libmnl, they would
need to construct a separate netlink message just to pluck out the payload
and hand it over to this function.
Currently, dcb_set_attribute() also always wraps the payload in an
DCB_ATTR_IEEE container, because that is what all the dcb subtools so far
needed. But that is not appropriate for DCBX in particular, and in fact a
handful other attributes, as well as any CEE payloads.
Instead, generalize this code by adding parameters for constructing a
custom payload and for fetching the response from a custom response
attribute. Then add dcb_set_attribute_va(), which takes a callback to
invoke in the right place for the nest to be built, and
dcb_set_attribute_bare(), which is similar to dcb_set_attribute(), but does
not encapsulate the payload in an IEEE container. Rewrite
dcb_set_attribute() compatibly in terms of the new functions.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
The function parse_mapping() assumes the key is a number, with a single
configurable exception, which is using "all" to mean "all possible keys".
If a caller wishes to use symbolic names instead of numbers, they cannot
reuse this function.
To facilitate reuse in these situations, convert parse_mapping() into a
helper, parse_mapping_gen(), which instead of an allow-all boolean takes a
generic key-parsing callback. Rewrite parse_mapping() in terms of this
newly-added helper and add a pair of key parsers, one for just numbers,
another for numbers and the keyword "all". Publish the latter as well.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
For formatting DSCP (not full dsfield), it would be handy to be able to
just get the name from the name table, and not get any of the remaining
cruft related to formatting. Add a new entry point to just fetch the
name table string uninterpreted. Use it from rtnl_dsfield_n2a().
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
The json output of the TCA_FLOWER_KEY_MPLS_OPTS attribute was invalid.
Example:
$ tc filter add dev eth0 ingress protocol mpls_uc flower mpls \
lse depth 1 label 100 \
lse depth 2 label 200
$ tc -json filter show dev eth0 ingress
...{"eth_type":"8847",
" mpls":[" lse":["depth":1,"label":100],
" lse":["depth":2,"label":200]]}...
This is invalid as the arrays, introduced by "[", can't contain raw
string:value pairs. Those must be enclosed into "{}" to form valid json
ojects. Also, there are spurious whitespaces before the mpls and lse
strings because of the indentation used for normal output.
Fix this by putting all LSE parameters (depth, label, tc, bos and ttl)
into the same json object. The "mpls" key now directly contains a list
of such objects.
Also, handle strings differently for normal and json output, so that
json strings don't get spurious indentation whitespaces.
Normal output isn't modified.
The json output now looks like:
$ tc -json filter show dev eth0 ingress
...{"eth_type":"8847",
"mpls":[{"depth":1,"label":100},
{"depth":2,"label":200}]}...
Fixes: eb09a15c12 ("tc: flower: support multiple MPLS LSE match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This to keep compatible with the major tools, ip and tc. Also
document the option in the man page, which was neglected.
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DCB socket buffer is allocated in dcb_init(), but never freed(). Free it
in dcb_fini().
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
dcb currently sends all netlink messages with a type RTM_GETDCB, even the
set ones. Change to the appropriate type.
Fixes: 67033d1c1c ("Add skeleton of a new tool, dcb")
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To allow building a new suite of DCB tools on an older kernel, carry a copy
of dcbnl.h.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support in rdma for extack errors to be received
in userspace when sent from kernel, so now netlink extack
error messages sent from kernel would be printed for the
user.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Before:
# ip nexthop help
Usage: ip nexthop { list | flush } [ protocol ID ] SELECTOR
ip nexthop { add | replace } id ID NH [ protocol ID ]
ip nexthop { get| del } id ID
SELECTOR := [ id ID ] [ dev DEV ] [ vrf NAME ] [ master DEV ]
[ groups ] [ fdb ]
NH := { blackhole | [ via ADDRESS ] [ dev DEV ] [ onlink ]
[ encap ENCAPTYPE ENCAPHDR ] | group GROUP ] }
GROUP := [ id[,weight]>/<id[,weight]>/... ]
ENCAPTYPE := [ mpls ]
ENCAPHDR := [ MPLSLABEL ]
After:
# ip nexthop help
Usage: ip nexthop { list | flush } [ protocol ID ] SELECTOR
ip nexthop { add | replace } id ID NH [ protocol ID ]
ip nexthop { get | del } id ID
SELECTOR := [ id ID ] [ dev DEV ] [ vrf NAME ] [ master DEV ]
[ groups ] [ fdb ]
NH := { blackhole | [ via ADDRESS ] [ dev DEV ] [ onlink ]
[ encap ENCAPTYPE ENCAPHDR ] | group GROUP [ fdb ] }
GROUP := [ <id[,weight]>/<id[,weight]>/... ]
ENCAPTYPE := [ mpls ]
ENCAPHDR := [ MPLSLABEL ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Match all MPLS fields using smallest and highest possible values.
Test the two ways of specifying MPLS header matching:
* with the basic mpls_{label,tc,bos,ttl} keywords (match only on the
first LSE),
* with the more generic "lse" keyword (allows matching at different
depth of the MPLS label stack).
This test file allows to find problems like the one fixed by
Linux commit 7fdd375e3830 ("net: sched: Fix dump of MPLS_OPT_LSE_LABEL
attribute in cls_flower").
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch allows the user to set and retrieve the
IFLA_MACVLAN_BC_QUEUE_LEN parameter via the bcqueuelen
command line argument
This parameter controls the requested size of the queue for
broadcast and multicast packages in the macvlan driver.
If not specified, the driver default (1000) will be used.
Note: The request is per macvlan but the actually used queue
length per port is the maximum of any request to any macvlan
connected to the same port.
For this reason, the used queue length IFLA_MACVLAN_BC_QUEUE_LEN_USED
is also retrieved and displayed in order to aid in the understanding
of the setting. However, it can of course not be directly set.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Signed-off-by: David Ahern <dsahern@gmail.com>
add_addr_accepted value is not printed if add_addr_signal value is 0.
Fix this properly looking for add_addr_accepted value, instead.
Fixes: 9c3be2c0ee ("ss: mptcp: add msk diag interface support")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
keys_ex is dinamically allocated with calloc on line 770, but
is not freed in case of error at line 823.
Fixes: 081d6c310d ("tc: pedit: Support JSON dumping")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
nlg_ntf is dinamically allocated in mnlg_socket_open(), and is freed on
the out: return path. However, some error paths do not free it,
resulting in memory leak.
This commit fix this using mnlg_socket_close(), and reporting the
correct error number when required.
Fixes: 9b13cddfe2 ("devlink: implement flash status monitoring")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
add man page for tc-ct, but it brings with it a bogus block of text
in the benning of tc-flower man page.
This commit simply removes it.
Fixes: 924c43778a ("man: tc-ct.8: Add manual page for ct tc action")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Petr Machata says:
====================
Add support to the dcb tool for the following three DCB objects:
- PFC, for "Priority-based Flow Control", allows configuration of priority
lossiness, and related toggles.
- DCBNL buffer interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of port headroom buffers.
- DCBNL maxrate interfaces are an extension to the 802.1q DCB interfaces
and allow configuration of rate with which traffic in a given traffic
class is sent.
Patches #1-#4 fix small issues in the current DCB code and man pages.
Patch #5 adds new helpers to the DCB dispatcher.
Patches #6 and #7 add support for command line arguments -s and -i. These
enable, respectively, display of statistical counters, and ISO/IEC mode of
rate units.
Patches #8-#10 add the subtools themselves and their man pages.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
DCBNL maxrate interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of rate with which traffic in a given traffic class is
sent.
Add a dcb subtool to allow showing and tweaking of this per-TC maximum
rate. For example:
# dcb maxrate show dev eni1np1
tc-maxrate 0:25Gbit 1:25Gbit 2:25Gbit 3:25Gbit 4:25Gbit 5:25Gbit 6:100Gbit 7:25Gbit
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
DCBNL buffer interfaces are an extension to the 802.1q DCB interfaces and
allow configuration of port headroom buffers.
Add a dcb subtool to allow showing and tweaking of buffer priority mapping
and buffer sizes. For example:
# dcb buf show dev eni1np1
prio-buffer 0:0 1:0 2:0 3:3 4:0 5:0 6:6 7:0
buffer-size 0:10000 1:0 2:0 3:70000 4:0 5:0 6:10000 7:0
total-size 221072
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow switching "dcb" into the ISO/IEC mode of units by passing -i.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow selective display of statistical counters by passing -s.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
The DCB buffer object has a settable array of 32-bit quantities, and the
maxrate object of 64-bit ones. Adjust dcb_parse_mapping() and related
helpers to support 64-bit values in mappings, and add appropriate helpers.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
None, one, or many parameters can be given on the command line, but
the current synopsis allows only none or one. Fix it.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
"dcb ets show dev X help" currently shows full "ets" help instead of just
help for the show command. Fix it.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
getopt_long() currently includes "c" and "n" in the short option string.
These probably slipped in as a cut'n'paste, and are not actually accepted.
Remove them.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern
Parav Pandit
Oliver Hartkopp
Jarod Wilson
wenxu
Petr Machata
Guillaume Nault
Stephen Hemminger
Petr Machata
Patrisious Haddad
Ido Schimmel
David Ahern
Thomas Karlsson
Andrea Claudi