In case of extending the UAPI old packages would break.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We need NEXT_ARG() to get *argv pointing to "alias"
parameter value. Overwise we get and check "alias"
string length.
Fixes: f88becf35e ("iplink: Process "alias" parameter correctly")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Zero value in min/max_tx_rate has a special meaning of no rate limit,
document it.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
When using the new minimum rate API and providing only one parameter
(minimum rate/maximum rate), we query the VF min and max rate regardless
of kernel support.
This resulted in segmentation fault in ipaddr_loop_each_vf, which tries
to access NULL pointer.
This patch identifies such cases by testing the VF table for NULL
pointer in IFLA_VF_RATE, and aborts the operation.
Aborting on the first VF is valid since if the kernel does not support
the new API for the first VF, it will not support it for the other VFs
as well.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
According to the documentation (man ip-link), the minimum TXRATE should
be always <= Maximum TXRATE, but commit f89a2a05ff ("Add support to
configure SR-IOV VF minimum and maximum Tx rate through ip tool") didn't
enforce it.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
When adding a filter with a gact action such as 'drop', tc first tries
to open a shared object with equivalent name (m_drop.so in this case)
before trying gact. Avoid this by matching the action name against those
handled by gact prior to calling get_action_kind().
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
The change to limit the read size from /dev/urandom is a tradeoff.
Reading too much can trigger an issue, but so it could if the
suggested 250 random chars would not contain enough [:alpha:] chars.
If they contain:
a) >=6 all is ok
b) [1-5] the devname would be shorter than expected (non fatal).
c) 0 things would break
In loops of hundreds of thousands it always was (a) for my, but since
if occuring in a test it might be hard to track what happened avoid
this issue by retrying on the length condition.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In some test environments like e.g. Ubuntu & Debian autopkgtest it
can happen that while generating random device names the pipes
between tr and head are considered dead while processing.
That prints (non fatal) issues like:
Running ip/link/new_link.t [iproute2-this/4.13.0-17-generic]: tr:
write error: Broken pipe
tr: write error
PASS
This only happens if reading an infinite amount of chars with the
read from urandom, so reading a defined amount fixes the issue.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These files are already mostly written in POSIX shell, so convert their
shebangs to /bin/sh and tweak the few bashisms in here.
URL: https://crbug.com/756559
Reported-by: Pat Erley <perley@chromium.org>
Signed-off-by: Mike Frysinger <vapier@chromium.org>
This document described how kernel and tc used to handle
timing. In last two years, kernel has switched over to using
ktime. Nothing to see here, move along.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To follow gre6 output print hoplimit before encapsulation
limit in link_ip6tnl.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To follow ip6tnl output print flowlabel after tclass
in link_gre6.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use %u format specifier to print it in link_gre6.c and
make code more readable.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
flowlabel and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
Omit flowlabel from output if no flowinfo attribute
is given and IP6_TNL_F_USE_ORIG_FLOWLABEL isn't set.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
tclass and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
While there use __u32 for flowinfo in link_gre6.c
and check for IFLA_GRE_FLOWINFO attribute presense.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is implementation internal and main purpose
of printing it seems debugging.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In link_gre6.c it seems copy paste error: tclass is 8 bits,
not 20 as flowlabel.
In link_iptnl.c rename "flowinfo_tclass" to "tclass" as it
correct name since flowinfo is implementation internal name
used to label combined within u32 attribute tclass and
flowlabel.
Fixes: 1facc1c61c ("ip: link_ip6tnl.c: add json output support")
Fixes: 2e706e12d9 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Incorporate upstream changes to fix compliation with MUSL.
See commit 6926e041a892
("uapi/if_ether.h: prevent redefinition of struct ethhdr")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When parsing and printing the unix sockets in unix_show(),
if the oldformat is detected, the peer_name member of the sockstat
object is left uninitialized (NULL).
For this reason, if a filter has been specified on the command line,
a strcmp() will crash when trying to access it.
Avoid crash by checking that peer_name is not NULL before
passing it to strcmp().
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When the first header field is disabled (i.e. when passing the -t
option), field_flush() is invoked with the `buffer` global variable
still zero'd.
However, in field_flush() we try to access buffer.cur->len
during variables initialization, thus leading to a SIGSEGV.
It's interesting to note that this bug appears only when the code
is compiled with -O0, because the compiler is smart
enough to immediately jump to the return statement if optimizations
are enabled and skip the faulty instruction.
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 69fed534a5 ("change how Config is used in Makefile's") removed
Config from Makefile. Config had the checks to set VERBOSE based on user
request and VERBOSE is used to add the --no-print-directory argument.
Since Config is gone, add the relevant setup for VERBOSE to Makefile
to restore quieter builds by default.
Fixes: 69fed534a5 ("change how Config is used in Makefile's")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It seems missing pair of open_json_object()/close_json_object()
in iptnl implementation.
Note that we open "encap" JSON object in ip6tnl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Tunnel mode does not appear in parameters print for iptnl
supported tunnels like ipip and sit, while printed for
ip6tnl.
Print tunnel mode as "proto" field name for JSON and
without any name when printing to cli to follow ip6tnl
behaviour.
For non JSON output we have:
$ ip -d link show dev sit1
Before:
-------
17: sit1@NONE: <NOARP> mtu 1480 qdisc noop state DOWN ...
link/sit X.X.X.X brd 0.0.0.0 promiscuity 0
sit remote any local X.X.X.X ...
~~~
After:
------
17: sit1@NONE: <NOARP> mtu 1480 qdisc noop state DOWN ...
link/sit X.X.X.X brd 0.0.0.0 promiscuity 0
sit any remote any local X.X.X.X ...
^^^
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both sit and ipip "mode" parameter handling nearly the same.
Except for sit we have "ip6ip" mode: check it only when
configuring sit.
Note that there is no need strcmp(lu->id, "ipip"): if it is
not sit it is "ipip" because we have only these two link util
defined in module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Leaving a variable with a generic name such as TARGETS undefined would lead
to Make picking up its value from the environment. Avoid this by always
defining TARGETS in the Makefiles.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Lintian detected the following formatting errors:
man/man8/devlink-sb.8.gz 230: warning: macro `b' not defined
man/man8/ip-link.8.gz 1243: warning: macro `in-8' not defined
(possibly missing space after `in')
man/man8/tc-u32.8.gz `R' is a string (producing the registered sign),
not a macro.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The filesytem paths to these scripts might be different on various
distros, so don't mention it in the manpages. It is not really useful
information anyway.
Originally submitted as Debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=561424
Reported-by: jidanni@jidanni.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Trying to set a label longer than 15 characters returns an error:
RTNETLINK answers: Numerical result out of range
Document the limit in the manpage.
Originally reported as a Debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661886
Reported-by: Gabor Kiss <kissg@ssg.ki.iif.hu>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A Debian user suggested adding more network-related keywords to the
ip manpage, so that manpage-scraping and indexing software like
apropos can do a better job of categorizing the programs.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877983
Suggested-by: Lynoure Braakman <lynoure@gmail.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Documentation should be distribution-agnostic - any specific quirks
should be handled by downstream maintainers, if necessary.
Remove mentions of Debian paths and package names.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is already given for original device we configure this
peer for.
Results from following command before/after change applied
are shown below:
$ ip link add dev veth1a type veth peer name veth1b \
type veth peer name veth1c
Before:
-------
<no output, no netdevs created>
After:
------
Error: duplicate "type": "veth" is the second value.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use the newly added TCA_HW_OFFLOAD indication from kernel
to print a consistent 'offloaded' message to user when listing qdiscs.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We always send flowinfo to the kernel. If flowlabel/tclass
was set first to non-inherit value and then reset to
inherit we do not clear flowlabel/tclass part in flowinfo,
send it to kernel and can get from the kernel back.
Even if we check for IP6_TNL_F_USE_ORIG_TCLASS and
IP6_TNL_F_USE_ORIG_FLOWLABEL when printing options
sending invalid flowlabel/tclass to the kernel seems
bad idea.
Note that ip6tnl always clean corresponding flowinfo
parts on inherit.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
We must clear bit, not set all but given bit.
Fixes: 858dbb208e ("ip link: Add support for remote checksum offload to IP tunnels")
Fixes: 73516e128a ("ip6tnl: Support for fou encapsulation"
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Since rtnl_talk() never returns with answer buffer allocated
on error we do not need to release it manually. After this
initializing answer with NULL before rtnl_talk() is useless.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
ll_addr_n2a() correctly prints tunnel endpoints for gre, ipip, sit
and ip6tnl, but not for ip6gre. Fix this by adding ARPHRD_IP6GRE to
IPv6 tunnel endpoing address conversion.
Before:
-------
$ ip link show
...
18: ip6tnl0: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default
link/tunnel6 :: brd ::
19: ip6gre0: <NOARP> mtu 1456 qdisc noop state DOWN mode DEFAULT group default
link/gre6 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 brd \
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
After:
------
$ ip link show
...
18: ip6tnl0: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default
link/tunnel6 :: brd ::
19: ip6gre0: <NOARP> mtu 1456 qdisc noop state DOWN mode DEFAULT group default
link/gre6 :: brd ::
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
When running "ip route list default" and not specifying address family,
one will get all of the routes instead of just default only. The same
is for "exact default" and "match default".
It behaves in such a way because default route with unspecified family
has the same all-zeroes value like no prefix specified at all. Thus
following code blindly ignores the fact, that prefix was actually
specified.
This patch adds the flag PREFIXLEN_SPECIFIED to the default route too.
And then checks its value when filtering routes.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Metric is one of the "unique key" fields of the route in Linux. But
still one can not use its value in filter while running ip list.
Because of this writing checks in scripts for example is incovenient.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
All tunnels already support for parsing/adding zero
endpoints and vti6 isn't an exception.
This check was added as part of commit 2a80154fde
(vti6: fix local/remote any addr handling) and looks
too restrictive as purpose of change is to avoid
endpoint configuration from uninitialized data.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use specialized helper to initialize endpoint addresses with
zeros instead of open coding this. This unifies initialization
style with other ipv6 tunnel variants (i.e. gre6 and vti6).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is added with
commit a7ed1520ee ("ip/tunnel: introduce tnl_parse_key()")
to avoid code duplication in ip6?tunnel.c.
Reuse it for gre/gre6 and vti/vti6 tunnel rtnl
configuration interface with the same purpose
it is used in tunnel ioctl interface in ip6?tunnel.c.
While there change type of key variables from
unsigned integer to __be32 to reflect nature of the
value they store and place error message in
tnl_parse_key() on a single line to make single
call to fprintf().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit 625df645b7 (Check user supplied interface name lengths)
iplink_parse() validates network device name using check_ifname()
helpers.
Remove redundant "name" length checks from iplink_parse() callers.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Do not stop parameters processing after "alias" parameter: it might
not be a last one. Seems copy pasted from "type" parameter code.
Check it's length does not exceed IFALIASZ - 1. Better we warn
than get RTNL error.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Correctly check for valid network device index supplied on
command line: indexes are always greather than zero. Check
for duplicate "index" argument.
Initialize @index to 0 to simplify handling it in iplink_modify().
Other callers (link_veth.c, iplink_vxcan.c) already did so.
No need to initialize ifi_index with 0 since it is already
initialized at the @struct req initialization time and not
modified in iplink_parse().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The makeargs() function did not handle end of string correctly
and would reference past end of string.
Found by fuzzing with ASAN.
Reported-by:Bug Basher <iamliketohack@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Arkadi Sharshevsky
Serhey Popovych
Gal Pressman
Phil Sutter
Christian Ehrhardt
Mike Frysinger
Stephen Hemminger
Jamal Hadi Salim
Antonio Quartulli
Filip Moc
David Ahern
Matthias Schiffer
Luca Boccassi
Yuval Mintz
Alexander Zubkov