To benefit other users (e.g. link_veth.c) of iplink_parse() from
additional attribute checks and setups made in iplink_modify(). This
catches most of weired cobination of parameters to peer device
configuration.
Drop @name, @dev, @link, @group and @index from iplink_parse() parameters
list: they are not needed outside.
While there change return -1 to exit(-1) for group parsing errors: we
want to stop further command processing unless -force option is given
to get error line easily.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both ip-link(8) and error message when "index" parameter is given for
set/delete case says that index can only be given during network
device creation.
Follow this documented behaviour and get rid of ambiguous behaviour in
case of both "dev" and "index" specified for ip link delete scenario
(actually "index" being ignored in favor to "dev").
Prohibit "index" when configuring/deleting group of network devices.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both of them accept network device name as argument, but have different
meaning:
dev - is a device by it's name,
name - name for specific device.
The only case where they treated separately is network device rename
case where need to specify both ifindex and new name. In rest of the
cases we can assume that dev == name.
With this change we do following:
1) Kill ambiguity with both "dev" and "name" parameters given the same
name:
ip link {add|set} dev veth100a name veth100a ...
2) Make sure we do not accept "name" more than once.
3) For VF and XDP treat "name" as "dev". Fail in case of "dev" is
given after VF and/or XDP parsing.
4) Make veth and vxcan to accept both "name" and "dev" as their peer
parameters, effectively following general ip-link(8) utility
behaviour on link create:
ip link add {name|dev} veth1a type veth peer {name|dev} veth1b
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
add support to match on ip_proto, sport and dport ranges.
For ip_proto, this patch currently enumerates, tcp, udp and sctp.
This list can be extended in the future.
example:
$ip rule add sport 666-777 dport 999 ip_proto tcp table 100
$ip rule show
0: from all lookup local
32765: from all ip_proto 6 sport 666-777 dport 999 lookup 100
32766: from all lookup main
32767: from all lookup default
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Basic support for JSON output when showing network namespaces.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
In kernel commit e1d2e8873369 ("IB/core: Add PCI write
end padding flags for WQ and QP"), we introduced new
device capability to advertise PCI write end padding.
PCI write end padding is the device's ability to pad the ending of
incoming packets (scatter) to full cache line such that the last
upstream write generated by an incoming packet will be a full cache
line.
This commit updates RDMAtool to present this field.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger says:
====================
The macsec code didn't really support JSON and had several
pieces of copy/pasted code.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
The JSON support in macsec code was mostly missing and what was
there was broken. This uses new json_print utilities to complete
output.
Compile tested only.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Several places copy/paste same code for printing array of statistics.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Break long lines and use const as recommended by checkpatch.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger says:
====================
The ip command implementation of JSON was very spotty. Only address
and link were originally implemented. After doing route for next,
went ahead and implemented it for a bunch of the other sub commands.
Hopefully will reach full coverage soon.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON support to the ip tcp_metrics output.
$ ip -j -p tcp_metrics show
[ {
"dst": "192.18.1.11",
"age": 23617.8,
"ssthresh": 7,
"cwnd": 3,
"rtt": 0.039176,
"rttvar": 0.039176,
"source": "192.18.1.2"
}
...
The JSON output does scale values differently since there is no good
way to indicate units. The rtt values are displayed in seconds in
JSON and microseconds in the original (non JSON) mode. In the example
above the output in without the -j flag, the output would be
... rtt 39176us rttvar 39176us
I did this since all the other values in the JSON record are also in
floating point seconds.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Basic JSON support for ip netconf command.
Also cleanup some checkpatch warnings about long lines.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON (and limited color) to ip neighbor table parameter output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Donald Sharp says:
====================
Fix iprule.c to use the actual `struct fib_rule_hdr` and to
allow the end user to see and use the protocol keyword
for rule manipulation.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow the specification of a protocol when the user
adds/modifies/deletes a rule.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Modify 'ip rule' command to notice when the kernel passes
to us the originating protocol.
Add code to allow the `ip rule flush protocol XXX`
command to be accepted and properly handled.
Modify the documentation to reflect these code changes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The iprule.c code was using `struct rtmsg` as the data
type to pass into the kernel for the netlink message.
While 'struct rtmsg' and `struct fib_rule_hdr` are
the same size and mostly the same, we should use
the correct data structure. This commit translates
the data structures to have iprule.c use the correct
one.
Additionally copy over the modified fib_rules.h file
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Eyal Birger says:
====================
This patchset extends tc to support the ipt ematch.
The first patch adds the ability for ematch cmdline parsers
to receive argc,argv parameters.
The second patch adds the em_ipt module.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
The commit calls a new tc ematch for using netfilter xtable matches.
This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.
Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).
The matcher uses libxtables for parsing the input parameters.
Example use for matching an IPSec state with reqid 1:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
basic match 'ipt(-m policy --dir in --pol ipsec --reqid 1)' \
action drop
This is the user-space counter part of kernel commit ccc007e4a746
("net: sched: add em_ipt ematch for calling xtables matches")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ematche uses YACC to parse ematch arguments and places them in struct bstr
linked lists.
It is useful to be able to receive parameters as argc,argv in order to use
getopt (and alike) argument parsers.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For IP-in-IP tunnels, one can specify the [no]allow-localremote command
when configuring a device. Under the hood, this flips the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
tunnels, and thus there's no way to configure the flag on these
netdevices. Therefore introduce the command to link_gre6 as well.
The original support was introduced in commit 21440d19d9
("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement an option (-b) to execute RDMAtool commands
from supplied file. This follows the same model as
in use for ip and devlink tools, by expecting
every new command to be on new line.
These commands are expected to be without any -*
(e.g. -d, -j, e.t.c) global flags, which should be
called externally.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger says:
====================
From: Stephen Hemminger <sthemmin@microsoft.com>
This set of patches adds color and full JSON support to bridge command.
The output format for bridge link command changes so that
$ bridge link show
and
$ ip link show
use same basic format.
The "-c" flag to bridge changes from shortened form of "-compressvlan"
to shortened form of "-color". Once again this is so that ip
and bridge command take similar options.
Lastly the JSON output format changes slightly but this
could not impact any real user, because in several cases
the current format was invalid JSON!
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Document color option, and no longer have restriction on json
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add json output for bridge link show command and reuse code
from ip command to display interface information.
This also changes the output format slightly for the non JSON case so
that it has same format as the ip link show command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use new functions from json_print to simplify code.
Provide standard flag for colorizing output.
The shortened -c flag is ambiguous it could mean color or
compressvlan; it is now changed to mean color for consistency
with other iproute2 commands.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Putting whole string "master eth0" in the interface name color
is wrong and confusing. Let's just turn color off for all attributes
of device.
Fixes: d92cc2d087 ("ipaddress: ll_map: Replace ll_idx_n2a() with ll_index_to_name()")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych
Roopa Prabhu
Stephen Hemminger
David Ahern
Leon Romanovsky
Donald Sharp
Eyal Birger
Sabrina Dubroca
Petr Machata
Stephen Hemminger