The JSON support in macsec code was mostly missing and what was
there was broken. This uses new json_print utilities to complete
output.
Compile tested only.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Several places copy/paste same code for printing array of statistics.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Break long lines and use const as recommended by checkpatch.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger says:
====================
The ip command implementation of JSON was very spotty. Only address
and link were originally implemented. After doing route for next,
went ahead and implemented it for a bunch of the other sub commands.
Hopefully will reach full coverage soon.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON support to the ip tcp_metrics output.
$ ip -j -p tcp_metrics show
[ {
"dst": "192.18.1.11",
"age": 23617.8,
"ssthresh": 7,
"cwnd": 3,
"rtt": 0.039176,
"rttvar": 0.039176,
"source": "192.18.1.2"
}
...
The JSON output does scale values differently since there is no good
way to indicate units. The rtt values are displayed in seconds in
JSON and microseconds in the original (non JSON) mode. In the example
above the output in without the -j flag, the output would be
... rtt 39176us rttvar 39176us
I did this since all the other values in the JSON record are also in
floating point seconds.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Basic JSON support for ip netconf command.
Also cleanup some checkpatch warnings about long lines.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON (and limited color) to ip neighbor table parameter output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Donald Sharp says:
====================
Fix iprule.c to use the actual `struct fib_rule_hdr` and to
allow the end user to see and use the protocol keyword
for rule manipulation.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow the specification of a protocol when the user
adds/modifies/deletes a rule.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Modify 'ip rule' command to notice when the kernel passes
to us the originating protocol.
Add code to allow the `ip rule flush protocol XXX`
command to be accepted and properly handled.
Modify the documentation to reflect these code changes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The iprule.c code was using `struct rtmsg` as the data
type to pass into the kernel for the netlink message.
While 'struct rtmsg' and `struct fib_rule_hdr` are
the same size and mostly the same, we should use
the correct data structure. This commit translates
the data structures to have iprule.c use the correct
one.
Additionally copy over the modified fib_rules.h file
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Eyal Birger says:
====================
This patchset extends tc to support the ipt ematch.
The first patch adds the ability for ematch cmdline parsers
to receive argc,argv parameters.
The second patch adds the em_ipt module.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
The commit calls a new tc ematch for using netfilter xtable matches.
This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.
Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).
The matcher uses libxtables for parsing the input parameters.
Example use for matching an IPSec state with reqid 1:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
basic match 'ipt(-m policy --dir in --pol ipsec --reqid 1)' \
action drop
This is the user-space counter part of kernel commit ccc007e4a746
("net: sched: add em_ipt ematch for calling xtables matches")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ematche uses YACC to parse ematch arguments and places them in struct bstr
linked lists.
It is useful to be able to receive parameters as argc,argv in order to use
getopt (and alike) argument parsers.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For IP-in-IP tunnels, one can specify the [no]allow-localremote command
when configuring a device. Under the hood, this flips the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
tunnels, and thus there's no way to configure the flag on these
netdevices. Therefore introduce the command to link_gre6 as well.
The original support was introduced in commit 21440d19d9
("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement an option (-b) to execute RDMAtool commands
from supplied file. This follows the same model as
in use for ip and devlink tools, by expecting
every new command to be on new line.
These commands are expected to be without any -*
(e.g. -d, -j, e.t.c) global flags, which should be
called externally.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger says:
====================
From: Stephen Hemminger <sthemmin@microsoft.com>
This set of patches adds color and full JSON support to bridge command.
The output format for bridge link command changes so that
$ bridge link show
and
$ ip link show
use same basic format.
The "-c" flag to bridge changes from shortened form of "-compressvlan"
to shortened form of "-color". Once again this is so that ip
and bridge command take similar options.
Lastly the JSON output format changes slightly but this
could not impact any real user, because in several cases
the current format was invalid JSON!
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Document color option, and no longer have restriction on json
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add json output for bridge link show command and reuse code
from ip command to display interface information.
This also changes the output format slightly for the non JSON case so
that it has same format as the ip link show command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use new functions from json_print to simplify code.
Provide standard flag for colorizing output.
The shortened -c flag is ambiguous it could mean color or
compressvlan; it is now changed to mean color for consistency
with other iproute2 commands.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Putting whole string "master eth0" in the interface name color
is wrong and confusing. Let's just turn color off for all attributes
of device.
Fixes: d92cc2d087 ("ipaddress: ll_map: Replace ll_idx_n2a() with ll_index_to_name()")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych says:
====================
With this series I propose to make print_linkinfo_brief() static in
favor of print_linkinfo() as single point for linkinfo printing.
Changes presented with this series tested using following script:
\#!/bin/bash
iproute2_dir="$1"
iface='eth0.2'
pushd "$iproute2_dir" &>/dev/null
for i in new old; do
DIR="/tmp/$i"
mkdir -p "$DIR"
ln -snf ip.$i ip/ip
# normal
ip/ip link show >"$DIR/ip-link-show"
ip/ip -4 addr show >"$DIR/ip-4-addr-show"
ip/ip -6 addr show >"$DIR/ip-6-addr-show"
ip/ip addr show dev "$iface" >"$DIR/ip-addr-show-$iface"
# brief
ip/ip -br link show >"$DIR/ip-br-link-show"
ip/ip -br -4 addr show >"$DIR/ip-br-4-addr-show"
ip/ip -br -6 addr show >"$DIR/ip-br-6-addr-show"
ip/ip -br addr show dev "$iface" >"$DIR/ip-br-addr-show-$iface"
done
rm -f ip/ip
diff -urN /tmp/{old,new} |sed -n -Ee'/^(-{3}|\+{3})[[:space:]]+/!p'
rc=$?
popd &>/dev/null
exit $rc
Expected results : <no output>
Actual results : <no output>
Although test coverage is far from ideal in my opinion it covers most
important aspects of the changes presented by the series.
All this work is done in prepare of iplink_get() enhancements to support
attribute parse that finally will be used to simplify ip/tunnel
RTM_GETLINK code.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
It shares lot of code with print_linkinfo(): drop duplicated part,
change parameters list, make it static and call from print_linkinfo()
after common path.
While there move SPRINT_BUF() to the function scope from blocks to
avoid duplication and use "%s" to print "\n" to help compiler optimize
exit for both print_linkinfo_brief() and normal paths.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is at least three places implementing same things: two in
ipaddress.c print_linkinfo() & print_linkinfo_brief() and one in
bridge/link.c.
They are diverge from each other very little: bridge/link.c does not
support JSON output at the moment and print_linkinfo_brief() does not
handle IFLA_LINK_NETNS case.
Introduce and use print_name_and_link() routine to handle name@link
output in all possible variations; respect IFLA_LINK_NETNS attribute to
handle case when link is in different namespace; use ll_idx_n2a() for
interface name instead of "<nil>" to share logic with other code (e.g.
ll_name_to_index() and ll_index_to_name()) supporting such template.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Be consistent in handling of IFLA_IFNAME attribute in all places: if
there is no attribute report bug to stderr and use ll_idx_n2a() as
last measure to get name in "if%u" format instead of "<nil>".
Use check_ifname() to validate network device name: this catches both
unexpected return from kernel and ll_idx_n2a().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Neither internal libnetlink nor libgenl depends on ll_map.o: prepare for
upcoming changes that brings much more cleaner dependency between
utils.o and ll_map.o.
However ll_map.o depends on libnetlink.o functions so we need to provide
libnetlink.a after libutil.a in LIBNETLINK at global Makefile.
Tested using make clean && make -j4. No problems so far.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Simplify calling code in ipaddr_list_flush_or_save() by introducing
intermediate variable of @struct nlmsghdr, drop duplicated code:
print_linkinfo_brief() never returns values other than <= 0 so we can
move print_selected_addrinfo() outside of each block.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There are few places to improve:
1) return -1 when entry is filtered instead of zero, which means
accept entry: ipaddress_list_flush_or_save() the only user of this
2) use ll_idx_n2a() as last resort to translate name to index for
"should never happen" cases when cache shouldn't be considered
3) replace open coded access to IFLA_IFNAME attribute data by
RTA_DATA() with rta_getattr_str()
4) simplify ifname printing since name is never NULL, thanks to (2).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now all users of ll_idx_n2a() replaced with ll_index_to_name() we can
move it's functionality to ll_index_to_name() and implement index to
name conversion using snprintf() and "if%u".
Use %u specifier in "if%..." template consistently: network device
indexes are always greather than zero.
Also introduce ll_idx_n2a() conterpart: ll_idx_a2n() that is used
to translate name of the "if%u" form to index using sscanf().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Stephen Hemminger
David Ahern
Donald Sharp
Eyal Birger
Sabrina Dubroca
Petr Machata
Roopa Prabhu
Leon Romanovsky
Stephen Hemminger
Serhey Popovych