Nikolay Aleksandrov says:
====================
This set adds support for vlan port/bridge multicast router option. It is
similar to the already existing bridge-wide mcast_router control. Patch 01
moves attribute adding and parsing together for vlan option setting,
similar to global vlan option setting. It simplifies adding new options
because we can avoid reserved values and additional checks. Patch 02
adds the new mcast_router option and updates the related man page.
Example:
# mark port ens16 as a permanent mcast router for vlan 100
$ bridge vlan set dev ens16 vid 100 mcast_router 2
# disable mcast router for port ens16 and vlan 200
$ bridge vlan set dev ens16 vid 200 mcast_router 0
$ bridge -d vlan show
port vlan-id
ens16 1 PVID Egress Untagged
state forwarding mcast_router 1
100
state forwarding mcast_router 2
200
state forwarding mcast_router 0
Note that this set depends on the latest kernel uapi headers.
====================
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for setting and dumping per-vlan/interface mcast_router
option. It controls the mcast router mode of a vlan/interface pair.
For bridge devices only modes 0 - 2 are allowed. The possible modes
are:
0 - disabled
1 - automatic router presence detection (default)
2 - permanent router
3 - temporary router (available only for ports)
Example:
# mark port ens16 as a permanent mcast router for vlan 100
$ bridge vlan set dev ens16 vid 100 mcast_router 2
# disable mcast router for port ens16 and vlan 200
$ bridge vlan set dev ens16 vid 200 mcast_router 0
$ bridge -d vlan show
port vlan-id
ens16 1 PVID Egress Untagged
state forwarding mcast_router 1
100
state forwarding mcast_router 2
200
state forwarding mcast_router 0
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Set vlan option attributes immediately while parsing to simplify the
checks, avoid having reserved values (e.g. -1 for unset var) and have
more limited scope for the variables. This is also similar to how global
vlan options are set. The attribute setting and checks are moved with
option parsing, no functional changes intended.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Update kernel headers to commit:
27151f177827 ("Merge tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux")
Signed-off-by: David Ahern <dsahern@kernel.org>
Not sure if anyone uses the routel script. The script was
a combination of ip route, shell and awk doing command scraping.
It is now possible to do this much better using the JSON
output formats and python.
Rewriting also fixes the bug where the old script could not parse
the current output format. At the end was getting:
/usr/bin/routel: 48: shift: can't shift that many
The new script also has IPv6 as option.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script is old and limited to IPv4.
Using ip route command directly is better option.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script was from olden days of ifcfg.
I don't see any distribution using it and it is time to put
it out to pasture.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script was a one off hack for a special case.
Now that ip commands have better formatting, there is no
real reason for it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
When creating a tap with multi_queue flag, this flag is not displayed
when dumping:
$ ip tuntap add tap23 mode tap multi_queue
$ ip tuntap
tap23: tap persist0x100
While at it, add a space between known flags and hexdump of unknown
ones.
Fixes: c41e038f48 ("iptuntap: allow creation of multi-queue tun/tap device")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit a9c3d70d90 broke backward compatibility
by making 'configure' error out if parameters are passed, instead of
ignoring them.
Sometimes packaging systems detect 'configure' and assume it's from
autotools, and pass a bunch of options. Eg:
dh_auto_configure
./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=${prefix}/include --mandir=${prefix}/share/man --infodir=${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking
Ignore unknown options again instead of erroring out.
Fixes: a9c3d70d90 ("configure: add options ability")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Iproute2 has not supported DECnet or IPX since version 5.0.
There were some leftover support in the ip options flags
and parsing, remove these.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
lacp_active specifies whether to send LACPDU frames periodically.
If set on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
v2: use strcmp instead of match for new options.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Presently, if a Geneve or VXLAN interface was created with 'external',
it's not possible for a user to determine e.g. the value of 'dstport'
after creation. This change fixes that by avoiding early returns.
This change partly reverts commit 00ff4b8e31 ("ip/tunnel: Be consistent
when printing tunnel collect metadata").
Signed-off-by: Ilya Dmitrichenko <errordeveloper@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch addresses Stephen's comment:
"""
> + print_null(PRINT_ANY, "", "\n", NULL);
Use print_nl() since it handles the case of oneline output.
Plus in JSON the newline is meaningless.
"""
It also removes two useless print_null's.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Recently we added SKBMOD_F_ECN option support to the kernel; support it in
the tc-skbmod(8) front end, and update its man page accordingly.
The 2 least significant bits of the Traffic Class field in IPv4 and IPv6
headers are used to represent different ECN states [1]:
0b00: "Non ECN-Capable Transport", Non-ECT
0b10: "ECN Capable Transport", ECT(0)
0b01: "ECN Capable Transport", ECT(1)
0b11: "Congestion Encountered", CE
This new option, "ecn", marks ECT(0) and ECT(1) IPv{4,6} packets as CE,
which is useful for ECN-based rate limiting. For example:
$ tc filter add dev eth0 parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod \
ecn
The updated tc-skbmod SYNOPSIS looks like the following:
tc ... action skbmod { set SETTABLE | swap SWAPPABLE | ecn } ...
Only one of "set", "swap" or "ecn" shall be used in a single tc-skbmod
command. Trying to use more than one of them at a time is considered
undefined behavior; pipe multiple tc-skbmod commands together instead.
"set" and "swap" only affect Ethernet packets, while "ecn" only affects
IP packets.
Depends on kernel patch "net/sched: act_skbmod: Add SKBMOD_F_ECN option
support", as well as iproute2 patch "tc/skbmod: Remove misinformation
about the swap action".
[1] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides man8 documentation for IOAM inside ip, ip-ioam and ip-route.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides support for adding, listing and removing IOAM namespaces
and schemas with iproute2. When adding an IOAM namespace, both "data" (=u32)
and "wide" (=u64) are optional. Therefore, you can either have none, one of
them, or both at the same time. When adding an IOAM schema, there is no
restriction on "DATA" except its size (see IOAM6_MAX_SCHEMA_DATA_LEN). By
default, an IOAM namespace has no active IOAM schema (meaning an IOAM namespace
is not linked to an IOAM schema), and an IOAM schema is not considered
as "active" (meaning an IOAM schema is not linked to an IOAM namespace). It is
possible to link an IOAM namespace with an IOAM schema, thanks to the last
command below (meaning the IOAM schema will be considered as "active" for the
specific IOAM namespace).
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Update kernel headers to commit:
1187c8c4642d ("net: phy: mscc: make some arrays static const, makes object smaller")
Signed-off-by: David Ahern <dsahern@kernel.org>
Make use of the already available brief flag and print the basic details of
the IPv4 or IPv6 neighbour cache in a tabular format for better readability
when the brief output is expected.
$ ip -br neigh
172.16.12.100 bridge0 b0:fc:36:2f:07:43
172.16.12.174 bridge0 8c:16:45:2f:bc:1c
172.16.12.250 bridge0 04:d9:f5:c1:0c:74
fe80::267b:9f70:745e:d54d bridge0 b0:fc:36:2f:07:43
fd16:a115:6a62:0:8744:efa1:9933:2c4c bridge0 8c:16:45:2f:bc:1c
fe80::6d9:f5ff:fec1:c74 bridge0 04:d9:f5:c1:0c:74
And add "ip neigh show" to the list of ip sub commands mentioned in the man
page that support the brief output in tabular format.
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Nikolay Aleksandrov says:
====================
This set adds support for vlan multicast options. The feature is
globally controlled by a new bridge option called mcast_vlan_snooping
which is added by patch 01. Then patches 2-5 add support for dumping
global vlan options and filtering on vlan id. Patch 06 adds support for
setting global vlan options and then patches 07-18 add all the new
global vlan options, finally patch 19 adds support for dumping vlan
multicast router ports. These options are identical in meaning, names and
functionality as the bridge-wide ones.
All the new vlan global commands are under the global keyword:
$ bridge vlan global show [ vid VID dev DEVICE ]
$ bridge vlan global set vid VID dev DEVICE ...
I've added command examples in each commit message. The patch-set is a
bit bigger but the global options follow the same pattern so I don't see
a point in breaking them. All man page descriptions have been taken from
the same current bridge-wide mcast options. The only additional iproute2
change which is left to do is the per-vlan mcast router control which
I'll send separately. Note to properly use this set you'll need the
updated kernel headers where mcast router was moved from a global option
to per-vlan/per-device one (changed uapi enum which was in net-next).
Example:
# enable vlan mcast snooping globally
$ ip link set dev bridge type bridge mcast_vlan_snooping 1
# enable mcast querier on vlan 100
$ bridge vlan global set dev bridge vid 100 mcast_querier 1
# show vlan 100's global options
$ bridge -s vlan global show vid 100
port vlan-id
bridge 100
mcast_snooping 1 mcast_querier 1 mcast_igmp_version 2 mcast_mld_version 1 mcast_last_member_count 2 mcast_last_member_interval 100 mcast_startup_query_count 2 mcast_startup_query_interval 3125 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000
A following kernel patch-set will add selftests which use these commands.
====================
Signed-off-by: David Ahern <dsahern@kernel.org>
Add dump support for vlan multicast router ports and their details if
requested. If details are requested we print 1 entry per line, otherwise
we print all router ports on a single line similar to how mdb prints
them.
Looks like:
$ bridge vlan global show vid 100
port vlan-id
bridge 100
mcast_snooping 1 mcast_querier 0 mcast_igmp_version 2 mcast_mld_version 1 mcast_last_member_count 2 mcast_last_member_interval 100 mcast_startup_query_count 2 mcast_startup_query_interval 3125 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000
router ports: ens20 ens16
Looks like (with -s):
$ bridge -s vlan global show vid 100
port vlan-id
bridge 100
mcast_snooping 1 mcast_querier 0 mcast_igmp_version 2 mcast_mld_version 1 mcast_last_member_count 2 mcast_last_member_interval 100 mcast_startup_query_count 2 mcast_startup_query_interval 3125 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000
router ports: ens20 187.57 temp
ens16 118.27 temp
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_querier option which
controls if the bridge will act as a multicast querier for that vlan.
Syntax: $ bridge vlan global set dev bridge vid 1 mcast_querier 1
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_startup_query_interval
option which controls the interval between queries in the startup phase.
To be consistent with the same bridge-wide option the value is reported
with USER_HZ granularity and the same granularity is expected when setting
it.
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_startup_query_interval 15000
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_query_response_interval
option which sets the Max Response Time/Maximum Response Delay for IGMP/MLD
queries sent by the bridge. To be consistent with the same bridge-wide
option the value is reported with USER_HZ granularity and the same
granularity is expected when setting it.
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_query_response_interval 13000
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_query_interval
option which controls the interval between queries sent by the bridge
after the end of the startup phase. To be consistent with the same
bridge-wide option the value is reported with USER_HZ granularity and
the same granularity is expected when setting it.
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_query_interval 13000
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_querier_interval
option which controls the interval after which if no other router
queries are seen the bridge will start sending its own queries.
To be consistent with the same bridge-wide option the value is reported
with USER_HZ granularity and the same granularity is expected when
setting it.
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_querier_interval 13000
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_membership_interval
option which controls the interval after which the bridge will leave a
group if no reports have been received for it. To be consistent with the
same bridge-wide option the value is reported with USER_HZ granularity and
the same granularity is expected when setting it.
The default is 26000 (260 seconds).
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_membership_interval 13000
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_last_member_interval
option which controls the interval between queries to find remaining
members of a group after a leave message. To be consistent with the same
bridge-wide option the value is reported with USER_HZ granularity and
the same granularity is expected when setting it.
The default is 100 (1 second).
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_last_member_interval 200
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_startup_query_count
option which controls the number of queries the bridge will send on the
vlan during startup phase (default 2).
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_startup_query_count 5
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_last_member_count option
which controls the number of queries the bridge will send on the vlan after
a leave is received (default 2).
Syntax:
$ bridge vlan global set dev bridge vid 1 mcast_last_member_count 10
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_mld_version option
which controls the MLD version on the vlan (default 1).
Syntax: $ bridge vlan global set dev bridge vid 1 mcast_mld_version 2
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_igmp_version option
which controls the IGMP version on the vlan (default 2).
Syntax: $ bridge vlan global set dev bridge vid 1 mcast_igmp_version 3
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add control and dump support for the global mcast_snooping option which
controls if multicast snooping is enabled or disabled for a single vlan.
Syntax: $ bridge vlan global set dev bridge vid 1 mcast_snooping 1
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support to change global vlan options via a new vlan global
set subcommand similar to the current vlan set subcommand. The man page
and help are updated accordingly. The command works only with bridge
devices. It doesn't support any options yet.
Syntax: $ bridge vlan global set vid VID dev DEV
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
In order to allow vlan filtering when dumping options we need to move
all print operations into the option dumping functions and add the
filtering after we've parsed the nested attributes so we can extract the
start and end vlan ids.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for new bridge vlan command grouping called global which
operates on global options. The first command it supports is "show".
To do that we update print_vlan_rtm to recognize the global vlan options
attribute and parse it properly.
Man page and help are also updated with the new command.
Syntax is: $ bridge vlan global show [ vid VID ] [ dev DEV ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Skip unknown attributes when printing vlan options in print_vlan_rtm.
Make sure print_vlan_opts doesn't accept attributes it doesn't understand.
Currently we print only one type, later global vlan options support will
be added.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out the code which prints current per-vlan options from
print_vlan_rtm without any changes, later we'll filter based on the vlan
attribute and add support for global vlan option printing.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for mcast_vlan_snooping option which controls per-vlan
multicast snooping, also update the man page.
Syntax: $ ip link set dev bridge type bridge mcast_vlan_snooping 0/1
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Jonas reports that ss -awp does not display any RAW sockets
on a Knoppix 4.4 kernel.
sockdiag_send() diverts to tcpdiag_send() to try the older
netlink interface. tcpdiag_send() works for TCP and DCCP
but not other protocols. Instead of rejecting unsupported
protocols (and missing RAW and SCTP) match on supported ones.
Link: https://lore.kernel.org/netdev/20210815231738.7b42bad4@mmluhan/
Reported-and-tested-by: Jonas Bechtel <post@jbechtel.de>
Fixes: 41fe6c34de ("ss: Add inet raw sockets information gathering via netlink diag interface")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 3a1ca9a5b ("bridge: update man page for new color and json changes")
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern
Nikolay Aleksandrov
Stephen Hemminger
David Marchand
Luca Boccassi
Hangbin Liu
Ilya Dmitrichenko
Justin Iurman
Peilin Ye
Gokul Sivakumar
Jakub Kicinski