Implement kernel devlink e-switch interface. Currently we allow
to get and set the device e-switch mode.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The code is a bit messy, as it starts with space after text and at some
point switches to space before text. But either way, printing space
before *and* after text almost certainly leads to printing more
whitespace than necessary.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
This functionality was first merged in:
f9dec657e4 (Richard Alpe tipc: add peer remove functionality)
And later backed out (as the kernel counterpart was held up) in:
385caeb13b (Stephen Hemminger Revert "tipc: add peer remove functionality")
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Prior to this patch, If one route entry's RTA_PREFSRC and RTA_GATEWAY
both were NULL, it was supposed to be restored ONLY as a local address.
But as it didn't check tb[RTA_PREFSRC] when restoring local networks,
rtattr_cmp would return a success if it was NULL, this route entry would
be restored again as a local network.
This patch is to add tb[RTA_PREFSRC] check when restoring local networks.
Fixes: 74af8dd962 ("ip route: restore route entries in correct order")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Phil Sutter <phil@nwl.cc>
Currently, the `ip ila` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: ec71cae0bb ("ila: Support for configuring ila to use netfilter hook")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip fou` command tries to initialize a genl context even
when we just want to see the help for the command, which doesn't require
to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: 6928747b6e ("ip fou: Support to configure foo-over-udp RX")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip macsec` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: b26fc590ce ("ip: add MACsec support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
All users of genl have the same code to open a genl socket and resolve
the family for their specific protocol. Introduce a helper to initialize
the handle, and use it in all the genl code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Introduce a generic function (nl_add_bearer_name()) that identifies a
bearer and adds it to an existing netlink message. This reduces code
complexity and makes the code a little bit easier to maintain.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Local ip is not required to identify a UDP bearer and shouldn't be
passed to bearer disable, set or get. In this patch we remove the
localip entry from the synopsis of these functions.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
This adds missing documentation of geneve type options:
- dstport
- external
- udpcsum
- udp6zerocsumtx
- udp6zerocsumrx
The bits for the last three was just copy and pasted from vxlan section.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Before this patch:
# ./tc/tc actions add action drop index 11
RTNETLINK answers: File exists
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
After this patch:
# ./tc/tc actions add action drop index 11
RTNETLINK answers: File exists
We have an error talking to the kernel
Cc: Stephen Hemminger <shemming@brocade.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
The function returns zero on success.
Reported-by: Mark Bloch <markb@mellanox.com>
Fixes: 69f5aff63c ("tc: use action_a2n() everywhere")
Signed-off-by: Phil Sutter <phil@nwl.cc>
The non-json output prints 'None' for such vlans.
And this can garble json output.
Fixes: d82a49ce85 ("bridge: add json support for bridge vlan show")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
When switching to C99 initializers, I forgot to add this one. This means
that when trying to set an estimator value, tc would complain about
spurious duplicate estimator parameter. But much worse, the random
variable content is sent to the kernel regardless of whether an
estimator was given or not.
Fixes: d17b136f7d ("Use C99 style initializers everywhere")
Reported-by: Stas Nichiporovich <stasn77@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
since kernel driver has valid default values for 'cipher' and 'icvlen',
there is no need for requiring users to specify both of them when a new
link is added. Also, prompt an error message and exit with appropriate
exit status in case of unsupported cipher suite.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
fix output of "ip address help" and "ip link help". Update TYPE list in man
pages ip-address.8 and ip-link.8 as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
- baseclass: major handle must match that of class's, Y defaults to 1
- flow map example: maps to 1-256, not 1-257
Signed-off-by: Michal Soltys <soltys@ziu.info>
Stephen Hemminger
Or Gerlitz
Nikolay Aleksandrov
Roman Mashak
Phil Sutter
Richard Alpe
Jamal Hadi Salim
Eric Dumazet
Gustavo Zacarias
Xin Long
Sabrina Dubroca
Tom Herbert
WANG Cong
Stephen Hemminger
Roopa Prabhu
Jiri Pirko
Davide Caratti
Michal Soltys