Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Alternative names are related to the "parent name". That means,
whenever ll_remember_index() is called to add/delete/update and it founds
the "parent name" im object by ifindex, processes related
alternative name im objects too. Put them in a list which holds the
relationship with the parent.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add document of accessing the MR counters into
the rdma-statistic man pages.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Show MR counters statistics. Filters are also enabled.
Examples:
~$: rdma stat show mr
dev mlx5_0 mrn 8 page_faults 1221 page_invalidations 0
dev mlx5_0 mrn 9 page_faults 1221 page_invalidations 0
~$: rdma stat show mr mrn 8
dev mlx5_0 mrn 8 page_faults 1221 page_invalidations 0
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This is a follow up of the commit eaefb07804 ("ipnetns: enable to dump
nsid conversion table").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is a follow up of the commit ebe3ce2fcc ("ipnetns: parse nsid as a
signed integer").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
By default, all devices are listed, not only the default group.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
now that INET_DIAG_INFO requests can dump TCP ULP information, extend 'ss'
to allow diagnosing kTLS when it is attached to a TCP socket. While at it,
import kTLS uAPI definitions from the latest net-next tree.
CC: Andrea Claudi <aclaudi@redhat.com>
Co-developed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
In devlink health show command the reporter's name parameter is called
reporter, but in the output the reporter's name is referred to as name
Before this patch:
$ devlink health show pci/0000:04:00.0 reporter tx
pci/0000:04:00.0:
name tx
state healthy error 0 recover 0 grace_period 500 auto_recover true
After this patch:
$ devlink health show pci/0000:04:00.0 reporter tx
pci/0000:04:00.0:
reporter tx
state healthy error 0 recover 0 grace_period 500 auto_recover true
Reported-by: Jiri Pirko <jiri@mellanox.com>
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a helper function which wraps code that adds a left hand side
space separator unless it follows a newline.
Fixes: e3d0f0c0e3 ("devlink: add option to generate JSON output")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
tc segfaults if gact action is used without action or index:
$ ip link add type dummy
$ tc actions add action pipe index 1
$ tc filter add dev dummy0 parent ffff: protocol ip \
pref 10 u32 match ip src 127.0.0.2 flowid 1:10 action gact
Segmentation fault
We expect tc to fail gracefully with an error message.
This happens if gact is the last argument of the incomplete
command. In this case the "gact" action is parsed, the macro
NEXT_ARG_FWD() is executed and the next matches() crashes
because of null argv pointer.
To avoid this, simply use NEXT_ARG() instead.
With this change in place:
$ ip link add type dummy
$ tc actions add action pipe index 1
$ tc filter add dev dummy0 parent ffff: protocol ip \
pref 10 u32 match ip src 127.0.0.2 flowid 1:10 action gact
Command line is not complete. Try option "help"
Fixes: fa49588973 ("tc: Fix binding of gact action by index.")
Reported-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The ability to specify the source adresse for 'encap ip' / 'encap ip6'
was added in commit 94a8722f2f but the man
page was not updated.
Also fixes a missing page in ip-route.8.in.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend existing devlink reload command by adding option "netns" by which
user can instruct kernel to reload the devlink instance into specified
network namespace.
Example:
$ ip netns add testns1
$ devlink dev reload netdevsim/netdevsim10 netns testns1
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Similar to ip tool, add an option to devlink to operate under certain
network namespace. Unfortunately, "-n" is already taken, so use "-N"
instead.
Example:
$ devlink -N testns1 dev show
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
RDMA has weak connection between PIDs and HW objects, because
the latter tied to file descriptors for their lifetime management.
The outcome of such connection is that for the following scenario,
the returned PID will be 0 (not-valid):
1. Create FD and context
2. Share it with ephemeral child
3. Create any object and exit that child
This flow was revealed in testing environment and of course real users
are not running such scenario, because it makes no sense at all in RDMA
world.
Let's do two changes in the code to support such workflow anyway:
1. Remove need to provide PID/kernel name. Code already supports it,
just need to remove extra validation.
2. Ball-out in case PID is 0.
Link: https://lore.kernel.org/linux-rdma/20191002123245.18153-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support to lookup a neigh entry
using recently added support in the kernel using RTM_GETNEIGH
example:
$ip neigh get 10.0.2.4 dev test-dummy0
10.0.2.4 dev test-dummy0 lladdr de:ad:be:ef:13:37 PERMANENT
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support to lookup a bridge fdb entry
using recently added support in the kernel using RTM_GETNEIGH
(and AF_BRIDGE family).
example:
$bridge fdb get 02:02:00:00:00:03 dev test-dummy0 vlan 1002
02:02:00:00:00:03 dev test-dummy0 vlan 1002 master bridge
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The man page of ip-macsec and the existance of the tool makes it seem like
the user could just configure static keys once, and be done with it. That is
not the case. Some form or key management must be done in user space.
Add a note about that.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If two processes attempt to invoke bpf_map_attach() at the same time,
then they will both create maps, then the first will successfully pin
the map to the filesystem and the second will not pin the map, but will
continue operating with a reference to its own copy of the map. As a
result, the sharing of the same map will be broken from the two programs
that were concurrently loaded via loaders using this library.
Fix this by adding a retry in the case where the pinning fails because
the map already exists on the filesystem. In that case, re-attempt
opening a fd to the map on the filesystem as it shows that another
program already created and pinned a map at that location.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
This reduces stack usage, as asprintf allocates memory on the heap.
This indirectly fixes a snprintf truncation warning (from gcc v9.2.1):
bpf.c: In function ‘bpf_get_work_dir’:
bpf.c:784:49: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
784 | snprintf(bpf_wrk_dir, sizeof(bpf_wrk_dir), "%s/", mnt);
| ^
bpf.c:784:2: note: ‘snprintf’ output between 2 and 4097 bytes into a destination of size 4096
784 | snprintf(bpf_wrk_dir, sizeof(bpf_wrk_dir), "%s/", mnt);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: e42256699c ("bpf: make tc's bpf loader generic and move into lib")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since linux commit 22d6552f827e ("xfrm interface: fix management of
phydev"), phydev is not mandatory anymore.
Note that it also could be useful before the above commit to not force the
user to put a phydev (the kernel was checking it anyway).
For example, it was useful to not set it in case of x-netns, because the
phydev is not available in the current netns:
Before the patch:
$ ip netns add foo
$ ip link add xfrm1 type xfrm dev eth1 if_id 1
$ ip link set xfrm1 netns foo
$ ip -n foo link set xfrm1 type xfrm dev eth1 if_id 2
Cannot find device "eth1"
$ ip -n foo link set xfrm1 type xfrm if_id 2
must specify physical device
Fixes: 286446c1e8 ("ip: support for xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit 6df9c7a06a ("ss: add SK_MEMINFO_DROPS display") ss -m
displays also a drop counter for each socket.
This commit properly document it into the man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Broken kernels (not-upstream) can provide wrong empty "comm" field.
It causes to segfault while printing in JSON format.
Fixes: 8ecac46a60 ("rdma: Add QP resource tracking information")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Listen to status notifications coming from kernel during flashing and
put them on stdout to inform user about the status.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel sends notifications about flash update status, so implement these
messages for monitoring.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The 'fw_load_policy' devlink parameter now supports an unknown value.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new devlink parameter along with string to uint
conversion.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For high speed adapter like Mellanox CX-5 card, it can reach upto
100 Gbits per second bandwidth. Currently htb already supports 64bit rate
in tc utility. However police action rate and peakrate are still limited
to 32bit value (upto 32 Gbits per second). Taking advantage of the 2 new
attributes TCA_POLICE_RATE64 and TCA_POLICE_PEAKRATE64 from kernel,
tc can use them to break the 32bit limit, and still keep the backward
binary compatibility.
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Signed-off-by: David Dai <zdai@linux.vnet.ibm.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a space after 'blackhole' is missing to properly separate the
protocol when it is given.
Fixes: 63df8e8543 ("Add support for nexthop objects")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
devlink segfaults when using grace_period without reporter
$ devlink health set pci/0000:00:09.0 grace_period 3500
Segmentation fault
devlink is instead supposed to gracefully fail printing a warning
message
$ devlink health set pci/0000:00:09.0 grace_period 3500
Reporter's name is expected.
This happens because DL_OPT_HEALTH_REPORTER_NAME and
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD are both defined as BIT(27).
When dl_opts_put() parse options and grace_period is set, it erroneously
tries to set reporter name to null.
This is fixed simply shifting by 1 bit enumeration starting with
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD.
Fixes: b18d89195b ("devlink: Add devlink health set command")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In the case where we have a large number of nexthops from a specific
protocol, allow the flush and list operations to take a protocol
to limit the commands scopes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Jiri Pirko
David Ahern
Erez Alfasi
Nicolas Dichtel
Florent Fourcot
Davide Caratti
Aya Levin
Andrea Claudi
Damien Robert
David Ahern
Leon Romanovsky
Stephen Hemminger
Roopa Prabhu
Julien Fortin
Thomas Haller
Joe Stringer
Mark Zhang
Dirk van der Merwe
David Dai
Donald Sharp