The revert of batchsize accidently reverted more than it should
and broke shared block functionality. Fix this by restoring the
original functionality.
To reproduce:
dst_ip 192.0.2.0/24 action drop
Unknown filter "block", hence option "10" is unparsable
Fixes: e991c04d64 ("Revert "tc: Add batchsize feature for filter and actions"")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'locals' output does not include a leading space so it runs up against
skmem:() output. Add a leading space to fix it.
Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Loose the "q" from the names and name the structure fields in the same
way rest of the code does. Also, fix list_add arg order which leads
to segfault.
Fixes: 33267017fa ("iproute2: devlink: port from sys/queue.h to list.h")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add document of setting the adaptive-moderation for the ib device.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
In order to set adaptive-moderation for an ib device the command is:
rdma dev set [DEV] adaptive-moderation [on|off]
rdma dev show -d
0: mlx5_0: node_type ca fw 16.25.0319 node_guid 248a:0703:00a5:29d0
sys_image_guid 248a:0703:00a5:29d0 adaptive-moderation on
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, AUTO_PATH_MIG, CHANGE_PHY_PORT,
PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, XRC,
MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B,
RAW_IP_CSUM, CROSS_CHANNEL, MANAGED_FLOW_STEERING, SIGNATURE_HANDOVER,
ON_DEMAND_PAGING, SG_GAPS_REG, RAW_SCATTER_FCS, PCI_WRITE_END_PADDING>
rdma resource show cq
dev mlx5_0 cqn 0 cqe 1023 users 4 poll-ctx UNBOUND_WORKQUEUE
adaptive-moderation off comm [ib_core]
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The _PRINT_FUNC() macro expands to a function call.
Putting a semi-colon is unnecessary and causes warnings with -pedantic
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
get_s64() uses internally strtoll() to parse the value out of a given
string. strtoll() returns a long long. However, the intermediate variable is
long only which might be 32 bit on some systems. So, fix it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add the command alias "change" to man page.
Don't show it on usage, since it is not commonly used.
Reported-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matteo Croce <mcroce@redhat.com>
The command
ip -details link show can0
prints in the last line the value of the clock frequency attached
to the name of the following value "numtxqueues", e.g.
clock 49500000numtxqueues 1 numrxqueues 1 gso_max_size
65536 gso_max_segs 65535
Add the missing space after the clock value.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
sys/queue.h does not exist on linux-musl targets and fails build as:
devlink.c:28:10: fatal error: sys/queue.h: No such file or directory
28 | #include <sys/queue.h>
| ^~~~~~~~~~~~~
The change ports to list.h API and drops dependency of 'sys/queue.h'.
The API maps one-to-one.
Build-tested on linux-musl and linux-glibc.
Bug: https://bugs.gentoo.org/690486
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: netdev@vger.kernel.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add document of accessing the QP counter, including bind/unbind a QP
to a counter manually or automatically, and dump counter statistics.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In manual mode a QP can be manually bound to a counter. If the counter
id(cntn) is not specified that kernel will allocate one. After a
successful bind, the cntn can be seen through "rdma statistic qp show".
And in unbind if lqpn is not specified then all QPs on this counter will
be unbound.
The manual and auto mode are mutual-exclusive.
Examples:
$ rdma statistic qp bind link mlx5_2/1 lqpn 178
$ rdma statistic qp bind link mlx5_2/1 lqpn 178 cntn 4
$ rdma statistic qp unbind link mlx5_2/1 cntn 4
$ rdma statistic qp unbind link mlx5_2/1 cntn 4 lqpn 178
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When strict_port is set, make get_port_from_argv() returns failure if
no valid port is specified.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With per-QP statistic counter support, a user is allowed to monitor
specific QPs categories, which are bound to/unbound from counters
dynamically allocated/deallocated.
In per-port "auto" mode, QPs are bound to counters automatically
according to common criteria. For example a per "type"(qp type)
scheme, where in each process all QPs have same qp type are bind
automatically to a single counter.
Currently only "type" (qp type) is supported. Examples:
$ rdma statistic qp set link mlx5_2/1 auto type on
$ rdma statistic qp set link mlx5_2/1 auto off
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add an interface to show which mode is active. Two modes are supported:
- "auto": In this mode all QPs belong to one category are bind automatically
to a single counter set. Currently only "qp type" is supported;
- "manual": In this mode QPs are bound to a counter manually.
Examples:
$ rdma statistic qp mode
0/1: mlx5_0/1: qp auto off
1/1: mlx5_1/1: qp auto off
2/1: mlx5_2/1: qp auto type on
3/1: mlx5_3/1: qp auto off
$ rdma statistic qp mode link mlx5_0
0/1: mlx5_0/1: qp auto off
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: fcc16c22 ("provide common json output formatter")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tunnel change fails if a tunnel name is not specified while using
'ip -6 tunnel change'. However, no warning message is printed and
no error code is returned.
$ ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none dev dummy0
$ ip -6 tunnel change dev dummy0 local 2001🔢:1 remote 2001🔢:2
$ ip -6 tunnel show ip6tnl1
ip6tnl1: gre/ipv6 remote fd::2 local fd::1 dev dummy0 encaplimit none hoplimit 127 tclass inherit flowlabel 0x00000 (flowinfo 0x00000000)
This commit checks if tunnel interface name is equal to an empty
string: in this case, it prints a warning message to the user.
It intentionally avoids to return an error to not break existing
script setup.
This is the output after this commit:
$ ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none dev dummy0
$ ip -6 tunnel change dev dummy0 local 2001🔢:1 remote 2001🔢:2
Tunnel interface name not specified
$ ip -6 tunnel show ip6tnl1
ip6tnl1: gre/ipv6 remote fd::2 local fd::1 dev dummy0 encaplimit none hoplimit 127 tclass inherit flowlabel 0x00000 (flowinfo 0x00000000)
Reviewed-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This reverts commit ba126dcad2.
It breaks tunnel creation when using 'dev' parameter:
$ ip link add type dummy
$ ip -6 tunnel add ip6tnl1 mode ip6ip6 remote 2001:db8:ffff💯:2 local 2001:db8:ffff💯:1 hoplimit 1 tclass 0x0 dev dummy0
add tunnel "ip6tnl0" failed: File exists
dev parameter must be used to specify the device to which
the tunnel is binded, and not the tunnel itself.
Reported-by: Jianwen Ji <jiji@redhat.com>
Reviewed-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Keep pr_out_binary_value function only for printing. Inner relations
like array grouping should be done outside the function.
Fixes: 844a61764c ("devlink: Add helper functions for name and value separately")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Although devlink health dump show command is given per reporter, it
returns large amounts of data. Trying to use the doit cb results in
OUT-OF-BUFFER error. This complementary patch raises the DUMP flag in
order to invoke the dumpit cb. We're safe as no existing drivers
implement the dump health reporter option yet.
Fixes: 041e6e651a ("devlink: Add devlink health dump show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute has an utility function which checks if a string is a prefix for
another one, to allow use of abbreviated commands, e.g. 'addr' or 'a'
instead of 'address'.
This routine unfortunately considers an empty string as prefix
of any pattern, leading to undefined behaviour when an empty
argument is passed to ip:
# ip ''
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# tc ''
qdisc noqueue 0: dev lo root refcnt 2
# ip address add 192.0.2.0/24 '' 198.51.100.1 dev dummy0
# ip addr show dev dummy0
6: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 02:9d:5e:e9:3f:c0 brd ff:ff:ff:ff:ff:ff
inet 192.0.2.0/24 brd 198.51.100.1 scope global dummy0
valid_lft forever preferred_lft forever
Rewrite matches() so it takes care of an empty input, and doesn't
scan the input strings three times: the actual implementation
does 2 strlen and a memcpy to accomplish the same task.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
parse_percent() currently allows to specify negative percentages
or value above 100%. However this does not seems to make sense,
as the function is used for probabilities or bandiwidth rates.
Moreover, using negative values leads to erroneous results
(using Bernoulli loss model as example):
$ ip link add test type dummy
$ ip link set test up
$ tc qdisc add dev test root netem loss gemodel -10% limit 10
$ tc qdisc show dev test
qdisc netem 800c: root refcnt 2 limit 10 loss gemodel p 90% r 10% 1-h 100% 1-k 0%
Using values above 100% we have instead:
$ ip link add test type dummy
$ ip link set test up
$ tc qdisc add dev test root netem loss gemodel 140% limit 10
$ tc qdisc show dev test
qdisc netem 800f: root refcnt 2 limit 10 loss gemodel p 40% r 60% 1-h 100% 1-k 0%
This commit changes parse_percent() with a check to ensure
percentage values stay between 1.0 and 0.0.
parse_percent_rate() function, which already employs a similar
check, is adjusted accordingly.
With this check in place, we have:
$ ip link add test type dummy
$ ip link set test up
$ tc qdisc add dev test root netem loss gemodel -10% limit 10
Illegal "loss gemodel p"
Fixes: 927e3cfb52 ("tc: B.W limits can now be specified in %.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Many tc modules were printing error messages to stdout.
This is problematic if using JSON or other output formats.
Change all these places to use fprintf(stderr, ...) instead.
Also, remove unnecessary initialization and places
where else is used after error return.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
John Hurley says:
====================
Recent kernel additions to TC allows the manipulation of MPLS headers as
filter actions.
The following patchset creates an iproute2 interface to the new actions
and includes documentation on how to use it.
v1->v2:
- change error from print_string() to fprintf(strerr,) (Stephen Hemminger)
- split long line in explain() message (David Ahern)
- use _SL_ instead of /n in print message (David Ahern)
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a man page describing the newly added TC mpls manipulation actions.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Create a new action type for TC that allows the pushing, popping, and
modifying of MPLS headers.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update the llproto_names array to allow users to reference the mpls
protocol ids with the names 'mpls_uc' for unicast MPLS and 'mpls_mc' for
multicast.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Import tc_mpls.h uapi header from kernel headers at commit:
1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params")
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce PCI PF and VF port flavour and port attributes such as PF
number and VF number.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0
pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ability to tweak the delay between gratuitous ND/ARP packets has been
added in kernel commit 07a4ddec3ce9 ("bonding: add an option to
specify a delay between peer notifications"), through
IFLA_BOND_PEER_NOTIF_DELAY attribute. Add support to set and show this
value.
Example:
$ ip -d link set bond0 type bond peer_notify_delay 1000
$ ip -d link l dev bond0
2: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 50:54:33:00:00:01 brd ff:ff:ff:ff:ff:ff
bond mode active-backup active_slave eth0 miimon 100 updelay 0
downdelay 0 peer_notify_delay 1000 use_carrier 1 arp_interval 0
arp_validate none arp_all_targets any primary eth0
primary_reselect always fail_over_mac active xmit_hash_policy
layer2 resend_igmp 1 num_grat_arp 5 all_slaves_active 0 min_links
0 lp_interval 1 packets_per_slave 1 lacp_rate slow ad_select
stable tlb_dynamic_lb 1 addrgenmode eu
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params")
import include/uapi/linux/const.h per new dependency in
include/uapi/linux/pkt_cls.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add 32-bit missing mask attribute in iproute2/tc, which has been long
supported by the kernel side.
v2: print value in hex with print_hex() as suggested by Stephen Hemminger.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Setting metrics for routes currently lead to non-parsable
json output. For example:
$ ip link add type dummy
$ ip route add 192.168.2.0 dev dummy0 metric 100 mtu 1000 rto_min 3
$ ip -j route | jq
parse error: ':' not as part of an object at line 1, column 319
Fixing this opening a json object in the metrics array and using
print_string() instead of fprintf().
This is the output for the above commands applying this patch:
$ ip -j route | jq
[
{
"dst": "192.168.2.0",
"dev": "dummy0",
"scope": "link",
"metric": 100,
"flags": [],
"metrics": [
{
"mtu": 1000,
"rto_min": 3
}
]
}
]
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Fixes: 968272e791 ("iproute: refactor metrics print")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Show devlink port number whenever kernel reports that attribute.
An example output for a physical port.
$ devlink port show
pci/0000:06:00.1/65535: type eth netdev eth1_p1 flavour physical port 1
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ido Schimmel
Patrick Talbert
Jiri Pirko
Stephen Hemminger
Yamin Friedman
Kurt Kanzenbach
Antonio Borneo
Sergei Trofimovich
Mark Zhang
Ivan Delalande
Andrea Claudi
Aya Levin
Matteo Croce
David Ahern
John Hurley
Parav Pandit
Vincent Bernat
Roman Mashak