Both functions take the desired address family as a parameter. So using
that to notify the user what address family was expected is correct,
unlike using dst->family which will tell the user only what address
family was specified.
The situation which commit 334af76143 tried to fix was when 'ip'
would accept addresses from multiple families. In that case, the family
parameter is set to AF_UNSPEC so that get_addr_1() may accept any valid
address.
This patch introduces a wrapper around family_name() which returns the
string "any valid" for AF_UNSPEC instead of the three question marks
unsuitable for use in error messages.
Tests for AF_UNSPEC:
| # ip a a 256.10.166.1/24 dev d0
| Error: any valid prefix is expected rather than "256.10.166.1/24".
| # ip neighbor add proxy 2001:db8::g dev d0
| Error: any valid address is expected rather than "2001:db8::g".
Tests for explicit address family:
| # ip -6 addrlabel add prefix 1.1.1.1/24 label 123
| Error: inet6 prefix is expected rather than "1.1.1.1/24".
| # ip -4 addrlabel add prefix dead:beef::1/24 label 123
| Error: inet prefix is expected rather than "dead:beef::1/24".
Reported-by: Jaroslav Aster <jaster@redhat.com>
Fixes: 334af76143 ("fix get_addr() and get_prefix() error messages")
Signed-off-by: Phil Sutter <phil@nwl.cc>
bpf_parse_string() will now correctly handle:
- Extraneous whitespace,
- OPs on multiple lines and
- overlong file names.
The added feature of allowing to have OPs on multiple lines (like e.g.
tcpdump prints them) is rather a side effect of fixing detection of
malformed bytecode files having random content on a second line, like
e.g.:
| 4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0
| foobar
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
For the most of the address flags, use a table of values rather
than open coding every value. This allows for easier inevitable
expansion of flags.
This also fixes the missing stable-privacy flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When we get a multicast route, the rtm_type is RTN_MULTICAST, but the
rtm_family may be AF_INET. If we only check the type with RTNL_FAMILY_IPMR,
we will get malformed address. e.g.
+ ip -4 route add multicast 172.111.1.1 dev em1 table main
Before fix:
+ ip route list type multicast table main
multicast ac6f:101:800:400:400:0:3c00:0 dev em1 scope link
After fix:
+ ip route list type multicast table main
multicast 172.111.1.1 dev em1 scope link
Fixes: 56e3eb4c34 ("ip: route: fix multicast route dumps")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
ip netns accepts invalid input as namespace name like an empty string or a
string longer than the maximum file name length.
Check that the netns name is not empty and less than or equal to NAME_MAX.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Ability to change geneve device attributes was added to kernel through
commit 5b861f6baa3a ("geneve: add rtnl changelink support"), however one
cannot do the same through ip-link(8) command. Changing the allowed
geneve device attributes using 'ip link set <geneve_name> type geneve id
<geneve_id> <allowed_attributes>' currently fails with 'operation not
supported' error. This patch adds support for it.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
When bpf fs mount path is from env, behavior is currently broken as
we continue to search in default paths, thus fix this up.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, it's still quite hard to figure out if a prog passed the
verifier, but later gets rejected due to different tail call ownership.
Figure out whether that is the case and provide appropriate error
messages to the user.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch replaces exits with returns in ip route
commands.
Allows to continue when invoked with ip -batch.
Signed-off-by: Élie Bouttier <elie@bouttier.eu>
In the presence of firewalls which improperly block ICMP Unreachable
(including Fragmentation Required) messages, Path MTU Discovery is
prevented from working.
The workaround is to handle IPv4 payloads opaquely, ignoring the DF
bit.
Kernel commit 22a59be8b7693eb2d0897a9638f5991f2f8e4ddd ("net: ipv4:
Add ability to have GRE ignore DF bit in IPv4 payloads") is
complemented by this user-space changeset which exposes control of
this setting.
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
ip netns keeps track of created namespaces with bind mounts named
/var/run/netns/<namespace>. No input sanitization is done, allowing creation and
deletion of files relatives to /var/run/netns or, if the path is non existent or
invalid, allows to create "untracked" namespaces (invisible to the tool).
This commit denies creation or deletion of namespaces with names contaning
"/" or matching exactly "." or "..".
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Make use of TCA_BPF_ID/TCA_ACT_BPF_ID that we exposed and print the ID
of the programs loaded and use the new BPF_OBJ_GET_INFO_BY_FD command
for dumping further information about the program, currently whether
the attached program is jited.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for map in map in the loader and add a small example program.
The outer map uses inner_id to reference a bpf_elf_map with a given ID
as the inner type. Loading maps is done in three passes, i) all non-map
in map maps are loaded, ii) all map in map maps are loaded based on the
inner_id map spec of a non-map in map with corresponding id, and iii)
related inner maps are attached to the map in map with given inner_idx
key. Pinned objetcs are assumed to be managed externally, so they are
only retrieved from BPF fs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Remove old samples that have been added in pre BPF fs days which were
using file descriptor passing. It's long obsolete and not encouraged
to use this method given BPF fs is the default way like in the other
samples.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch extends route get to support mpls specific
route attributes like RTA_NEWDST.
Input:
RTA_DST - input label
RTA_NEWDST - labels in packet for multipath selection
By default the getroute handler returns matched
nexthop label, via and oif
With fibmatch keyword (RTM_F_FIB_MATCH flag), full matched
route is returned.
example:
$ip -f mpls route show
101
nexthop as to 102/103 via inet 172.16.2.2 dev virt1-2
nexthop as to 302/303 via inet 172.16.12.2 dev virt1-12
201
nexthop as to 202/203 via inet6 2001:db8:2::2 dev virt1-2
nexthop as to 402/403 via inet6 2001:db8:12::2 dev virt1-12
$ip -f mpls route get 103
RTNETLINK answers: Network is unreachable
$ip -f mpls route get 101
101 as to 102/103 via inet 172.16.2.2 dev virt1-2
$ip -f mpls route get as to 302/303 101
101 as to 302/303 via inet 172.16.12.2 dev virt1-12
$ip -f mpls route get fibmatch 103
RTNETLINK answers: Network is unreachable
$ip -f mpls route get fibmatch 101
101
nexthop as to 102/103 via inet 172.16.2.2 dev virt1-2
nexthop as to 302/303 via inet 172.16.12.2 dev virt1-12
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This page is to highlight all operations and options that are
applicable to all tc actions.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Let XDP link set command request that the program be offloaded.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Allow user to select XDP DRV_MODE flag by using xdpdrv keyword
instead of xdp or xdpgeneric.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Add interpretation of XDP_ATTACHED_HW mode on dump.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support to the newly added IFLA_XDP_PROG_ID.
./ip link show dev eth0
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdpgeneric/id:2 qdisc [...]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
When LLVM wrongly generates a rodata relo entry (llvm BZ #33599),
then just bail out instead of probing for prog w/o reloc, which
will fail in this case anyway.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As it turned out, forgetting to add a man page to the respective
Makefile when introducing it is a common mistake. Overcome this once and
for all by using $(wildcard) function in Makefiles.
Fixes: 7124942942 ("genl: add manpage")
Fixes: 958cd21094 ("ifcfg: add manpage")
Fixes: e1b7f883e5 ("man: add documentation for IPv6 SR commands")
Fixes: 1949f82cdf ("Introduce ip vrf command")
Fixes: 535194a172 ("tipc: add peer remove functionality")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Adding new tunnel key fields would cause the usage line overflow 80 chars.
Make the usage text similar to other commands.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
In case default control action parsing takes place, it is ok to miss.
So don't print error message.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Jiri Benc <jbenc@redhat.com>
If a header that includes linux/in6.h is included before
iproute's utils.h, then iproute2 fails to compile on older
glibc versions.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
After upstream commit 5071034e4af7 ('neigh: Really delete an arp/neigh entry
on "ip neigh delete" or "arp -d"'), we could delete a single FAILED neighbour
entry now. But `ip neigh flush` still skip the FAILED entry.
Move the filter after first round flush so we can flush FAILED entry on fixed
kernel and also do not keep retrying on old kernel.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
When the user specifies `table all` or `table 0` to
the `ip mroute show` command we dump the entirety of
the known mroute tables. Without some sort of
divisor to tell us what table we are looking at
the command is useless.
Add `Table: <vrf name>` to the output of 'ip mroute show table 0'
Follow the convention established by 'ip route show table 0'
for when to display
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This option is documented in gre6 help, but was not supported.
Fixes: af89576d7a ("iproute2: GRE over IPv6 tunnel support.")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Phil Sutter
Stephen Hemminger
Hangbin Liu
Matteo Croce
Girish Moodalbail
Daniel Borkmann
Élie Bouttier
Philip Prindeville
Roopa Prabhu
Krister Johansen
Lucas Bates
Roman Mashak
Jakub Kicinski
Martin KaFai Lau
Lukas Braun
Jiri Benc
Jiri Pirko
David Lebrun
Donald Sharp
Nicolas Dichtel