u32 uses NEXT_ARG() incorrectly when parsing skip_hw and skip_sw
flags. NEXT_ARG() ensures there is another argument on the command
line, and is used in handling <keyword> <value> syntax to move past
<keyword> and ensure there is a <value> to read.
Commit 5e5b3008d1 ("tc: f_u32: Add support for skip_hw and skip_sw
flags") seems to have copy pasted the handling from the previous
command - "police", which needs an extra parameter and is kind of
special due to the use of parse_police() helper.
The combination of NEXT_ARG() and continue worked fine as long as
skip_sw/skip_hw wasn't last, e.g.:
$ tc filter add dev dummy0 ingress prio 101 protocol ipv6 \
u32 match ip6 priority 0xa0 0xe0 skip_hw action pass
But would fail if it was last:
$ tc filter add dev dummy0 ingress prio 101 protocol ipv6 \
u32 match ip6 priority 0xa0 0xe0 flowid :1 skip_hw
Command line is not complete. Try option "help"
Remove the NEXT_ARG()s and the continues, and let the argc--; argv++;
at the end of the loop do its job.
Fixes: 5e5b3008d1 ("tc: f_u32: Add support for skip_hw and skip_sw flags")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When building Debian packages pre-processor flags are passed via
CPPFLAGS, as the convention indicates. Specifically, the hardening
-D_FORTIFY_SOURCE=2 flag is used.
Pass CPPFLAGS to all calls of QUIET_CC together with CFLAGS.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is simpler and cleaner, and avoids having to include the header
from every file where the functions are used. The prototypes of the
internal implementation are in this header, so utils.h will have to be
included anyway for those.
Fixes: 508f3c231e ("Use libbsd for strlcpy if available")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If libc does not provide strlcpy check for libbsd with pkg-config to
avoid relying on inline version.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Value of 'default' is assumed to be hexadecimal when parsing, so
consequently it should be printed in hex as well. This is a regression
introduced when adding JSON output.
As requested, also change JSON output to print the value as hex string.
Fixes: f354fa6aa5 ("tc: jsonify htb qdisc")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
All these assignments are later overwritten without reading in between,
so just drop them.
Fixes: 485d0c6001 ("tc: Add batchsize feature for filter and actions")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Print limits correctly in JSON context.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Recently flower classifier was updated to expose count of devices that
filter is offloaded to. Add support to print this counter as 'in_hw_count'.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Allow matching on options in Geneve tunnel headers.
The options can be described in the form
CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is
represented as a 16bit hexadecimal value, TYPE as an 8bit
hexadecimal value and DATA as a variable length hexadecimal value.
e.g.
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev geneve0 ingress
# tc filter add dev geneve0 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \
ip_proto udp \
action mirred egress redirect dev eth1
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
ip/iproute_lwtunnel.c
In addition to merge conflict between bd59e5b151 and 94a8722f2f,
updated the code added by the latter commit based on the change of the
former (ie., added ret = to the new rta_addattr_l).
Signed-off-by: David Ahern <dsahern@gmail.com>
Similar to the previous patch for no-split-gso, the negative keywords for
'nat', 'wash' and 'ack-filter' were not printed either. Add those well.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When the GSO splitting was turned into dual split-gso/no-split-gso options,
the printing of the latter was left out. Add that, so output is consistent
with the options passed.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Print the name of the argument that wasn't understood.
Signed-off-by: Caleb Raitto <caraitto@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend slotting with support for non-uniform distributions. This is
similar to netem's non-uniform distribution delay feature.
Syntax:
slot distribution DISTRIBUTION DELAY JITTER [packets MAX_PACKETS] \
[bytes MAX_BYTES]
The syntax and use of the distribution table is the same as in the
non-uniform distribution delay feature. A file DISTRIBUTION must be
present in TC_LIB_DIR (e.g. /usr/lib/tc) containing numbers scaled by
NETEM_DIST_SCALE. A random value x is selected from the table and it
takes DELAY + ( x * JITTER ) as delay. Correlation between values is not
supported.
Examples:
Normal distribution delay with mean = 800us and stdev = 100us.
> tc qdisc add dev eth0 root netem slot distribution normal \
800us 100us
Optionally set the max slot size in bytes and/or packets.
> tc qdisc add dev eth0 root netem slot distribution normal \
800us 100us bytes 64k packets 42
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Slotting is a crude approximation of the behaviors of shared media such
as cable, wifi, and LTE, which gather up a bunch of packets within a
varying delay window and deliver them, relative to that, nearly all at
once.
It works within the existing loss, duplication, jitter and delay
parameters of netem. Some amount of inherent latency must be specified,
regardless.
The new "slot" parameter specifies a minimum and maximum delay between
transmission attempts.
The "bytes" and "packets" parameters can be used to limit the amount of
information transferred per slot.
Examples of use:
tc qdisc add dev eth0 root netem delay 200us \
slot 800us 10ms bytes 64k packets 42
A more correct example, using stacked netem instances and a packet limit
to emulate a tail drop wifi queue with slots and variable packet
delivery, with a 200Mbit isochronous underlying rate, and 20ms path
delay:
tc qdisc add dev eth0 root handle 1: netem delay 20ms rate 200mbit \
limit 10000
tc qdisc add dev eth0 parent 1:1 handle 10:1 netem delay 200us \
slot 800us 10ms bytes 64k packets 42 limit 512
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Using a 32 bit field to represent time in nanoseconds results in a
maximum value of about 4.3 seconds, which is well below many observed
delays in WiFi and LTE, and barely in the ballpark for a trip past the
Earth's moon, Luna.
Using 64 bit time fields in nanoseconds allows us to simulate
network diameters of several hundred light-years. However, only
conversions to and from ns, us, ms, and seconds are provided.
The iproute2 64 bit api uses signed values for time. Being able to
represent positive or negative time allows us to calculate +/- deltas
between, for example, the CLOCK_TAI and CLOCK_REALTIME clocks.
Time related utility functions in tc_util.c are moved to lib/utils.c.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since introduction of htb module, this variable has never been used.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
The check used binary instead of boolean AND, which means colored output
was enabled only if the number of specified '-color' flags was odd.
Fixes: 2d165c0811 ("tc: implement color output")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
sch_skbprio is a qdisc that prioritizes packets according to their skb->priority
field. Under congestion, it drops already-enqueued lower priority packets to
make space available for higher priority packets. Skbprio was conceived as a
solution for denial-of-service defenses that need to route packets with
different priorities as a means to overcome DoS attacks.
Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com>
Reviewed-by: Michel Machado <michel@digirati.com.br>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch makes sch_cake's gso/gro splitting configurable
from userspace.
To disable breaking apart superpackets in sch_cake:
tc qdisc replace dev whatever root cake no-split-gso
to enable:
tc qdisc replace dev whatever root cake split-gso
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add matching on tos/ttl of the IP tunnel headers.
For example, here's decap rule that matches on the tunnel tos:
tc filter add dev vxlan_sys_4789 protocol ip parent ffff: prio 10 flower \
enc_src_ip 192.168.10.2 enc_dst_ip 192.168.10.1 enc_key_id 100 enc_dst_port 4789 enc_tos 0x30 \
src_mac e4:11:22:33:44:70 dst_mac e4:11:22:33:44:50 \
action tunnel_key unset \
action mirred egress redirect dev eth0_0
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow to set tos and ttl for the tunnel.
For example, here's encap rule that sets tos to the tunnel:
tc filter add dev eth0_0 protocol ip parent ffff: prio 10 flower \
src_mac e4:11:22:33:44:50 dst_mac e4:11:22:33:44:70 \
action tunnel_key set src_ip 192.168.10.1 dst_ip 192.168.10.2 id 100 dst_port 4789 tos 0x30 \
action mirred egress redirect dev vxlan_sys_4789
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is consistent with the other multi-word parameters. Also change the
JSON output to be consistent with way it is formatted for the other
options.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Here we are partially reverting commit c14f9d92ee
"treewide: Use addattr_nest()/addattr_nest_end() to handle nested
attributes" .
As discussed in [1], changing from the 'manually' coded version that
used addattr_l() to addattr_nest_compat() wasn't functionally
equivalent, because now the messages have extra fields appended to it.
This introduced a regression since the implementation of parse_attr()
from both mqprio and netem can't handle this new message format.
Without this fix, mqprio returns an error. netem won't return an error
but its internal configuration ends up wrong.
As an example, this can be reproduced by the following commands when
this patch is not applied:
1) mqprio
$ tc qdisc replace dev enp3s0 parent root handle 100 mqprio \
num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 hw 0
RTNETLINK answers: Numerical result out of range
2) netem
$ tc qdisc add dev enp3s0 root netem rate 5kbit 20 100 5 \
distribution normal latency 1 1
$ tc -s qdisc
(...)
qdisc netem 8001: dev enp3s0 root refcnt 9 limit 1000 delay 0us 0us
Sent 402 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
(...)
With this patch applied, the tc -s qdisc command above for netem instead
reads:
(...)
qdisc netem 8002: dev enp3s0 root refcnt 9 limit 1000 delay 0us 0us \
rate 5Kbit packetoverhead 20 cellsize 100 celloverhead 5
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
(...)
[1] https://patchwork.ozlabs.org/patch/867860/#1893405
Fixes: c14f9d92ee ("treewide: Use addattr_nest()/addattr_nest_end() to handle nested attributes")
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sch_cake is intended to squeeze the most bandwidth and latency out of even
the slowest ISP links and routers, while presenting an API simple enough
that even an ISP can configure it.
Example of use on a cable ISP uplink:
tc qdisc add dev eth0 cake bandwidth 20Mbit nat docsis ack-filter
To shape a cable download link (ifb and tc-mirred setup elided)
tc qdisc add dev ifb0 cake bandwidth 200mbit nat docsis ingress wash besteffort
Cake is filled with:
* A hybrid Codel/Blue AQM algorithm, "Cobalt", tied to an FQ_Codel
derived Flow Queuing system, which autoconfigures based on the bandwidth.
* A novel "triple-isolate" mode (the default) which balances per-host
and per-flow FQ even through NAT.
* An deficit based shaper, that can also be used in an unlimited mode.
* 8 way set associative hashing to reduce flow collisions to a minimum.
* A reasonable interpretation of various diffserv latency/loss tradeoffs.
* Support for zeroing diffserv markings for entering and exiting traffic.
* Support for interacting well with Docsis 3.0 shaper framing.
* Support for DSL framing types and shapers.
* Support for ack filtering.
* Extensive statistics for measuring, loss, ecn markings, latency variation.
Various versions baking have been available as an out of tree build for
kernel versions going back to 3.10, as the embedded router world has been
running a few years behind mainline Linux. A stable version has been
generally available on lede-17.01 and later.
sch_cake replaces a combination of iptables, tc filter, htb and fq_codel
in the sqm-scripts, with sane defaults and vastly simpler configuration.
Cake's principal author is Jonathan Morton, with contributions from
Kevin Darbyshire-Bryant, Toke Høiland-Jørgensen, Sebastian Moeller,
Ryan Mounce, Tony Ambardar, Dean Scarff, Nils Andreas Svee, Dave Täht,
and Loganaden Velvindron.
Testing from Pete Heist, Georgios Amanakis, and the many other members of
the cake@lists.bufferbloat.net mailing list.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
The new action inheritdsfield copies the field DS of
IPv4 and IPv6 packets into skb->priority. This enables
later classification of packets based on the DS field.
v4:
* Make tc use netlink helper functions
v3:
* Make flag represented in JSON output as a null value
v2:
* Align the output syntax with the input syntax
* Fix the style issues
Original idea by Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Qiaobin Fu <qiaobinf@bu.edu>
Reviewed-by: Michel Machado <michel@digirati.com.br>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The "Earliest TxTime First" (ETF) queueing discipline allows precise
control of the transmission time of packets by providing a sorted
time-based scheduling of packets.
The syntax is:
tc qdisc add dev DEV parent NODE etf delta <DELTA>
clockid <CLOCKID> [offload] [deadline_mode]
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conversion to print stats in JSON forgot to remove existing
fprintf.
Fixes: 4fcec7f366 ("tc: jsonify stats2")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A commandline like 'tc -d class show dev dev-name' does not
display value of prio and quantum option when we use htb qdisc.
This patch fixes the bug.
Signed-off-by: Fumihiko Kakuma <kakuma@valinux.co.jp>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Example output is of tos and ttl.
Befoe this fix the format used %x caused output of the pointer
instead of the intended string created in the out variable.
Fixes: e28b88a464 ("tc: jsonify flower filter")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow setting tunnel options using the act_tunnel_key action.
Options are expressed as class:type:data and multiple options
may be listed using a comma delimiter.
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
geneve_opts 0102:80:00800022,0102:80:00800022 \
action mirred egress redirect dev geneve0
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When sending accumulated compound command results an error, check 'force'
option before exiting. Move return code check after putting batch bufs and
freeing iovs to prevent memory leak. Break from loop, instead of returning
error code to allow cleanup at the end of batch function. Don't reset ret
code on each iteration.
Fixes: 485d0c6001 ("tc: Add batchsize feature for filter and actions")
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In order to make TDC tests match the output patterns, the missing space
character must be added in the mode output string.
Fixes: 8744c5d338 ("tc: jsonify ife action")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently there is no way to log offloading errors if the rule is not
explicitly marked as skip_sw, making it hard for other applications such
as Open vSwitch to log why a given could not be offloaded.
This patch adds support for signaling the kernel that more verbose
logging is wanted, which now will include such messages.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The dash printed by the ingress qdisc breaks JSON output, so only print it
in regular output mode.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 9fd3f0b255 ("tc: enable json output for actions") added JSON
support for tc-actions at the expense of breaking other use cases that
reach tc_print_action(), as the latter don't expect the 'actions' array
to be a new object.
Consider the following taken duringrun of tc_chain.sh selftest,
and see the latter command output is broken:
$ ./tc/tc -j -p actions list action gact | grep -C 3 actions
[ {
"total acts": 1
},{
"actions": [ {
"order": 0,
$ ./tc/tc -p -j -s filter show dev enp3s0np2 ingress | grep -C 3 actions
},
"skip_hw": true,
"not_in_hw": true,{
"actions": [ {
"order": 1,
"kind": "gact",
"control_action": {
Relocate the open/close of the JSON object to declare the object only
for the case that needs it.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Tested-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add initial support for oneline mode in tc; actions, filters and qdiscs
will be gradually updated in the follow-up patches.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The compat_rev field does not exists in old versions of iptables.
e.g. iptables 1.4.
Fixes: dd29621578 ("tc: add em_ipt ematch for calling xtables matches from tc matching context")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Enable proper JSON output support for fq_codel in `tc -s qdisc` output.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add missing documentation of the memory_limit fq_codel parameter and the
ce_threshold codel and fq_codel parameters.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
If the user didn't specify any control action, don't pop the command line
arguments: otherwise, parsing of the next argument (tipically the 'index'
keyword) results in an error, causing the following 'tc-testing' failures:
Test a6d6: Add skbedit action with index
Test 38f3: Delete skbedit action
Test a568: Add action with ife type
Test b983: Add action without ife type
Test 7d50: Add skbmod action to set destination mac
Test 9b29: Add skbmod action to set source mac
Test e93a: Delete an skbmod action
Also, add missing parse for 'ok' control action to m_police, to fix the
following 'tc-testing' failure:
Test 8dd5: Add police action with control ok
tested with:
# ./tdc.py
test results:
all tests ok using kernel 4.16-rc2, except 9aa8 "Get a single skbmod
action from a list" (which is failing also before this commit)
Fixes: 3572e01a09 ("tc: util: Don't call NEXT_ARG_FWD() in __parse_action_control()")
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The commit calls a new tc ematch for using netfilter xtable matches.
This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.
Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).
The matcher uses libxtables for parsing the input parameters.
Example use for matching an IPSec state with reqid 1:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
basic match 'ipt(-m policy --dir in --pol ipsec --reqid 1)' \
action drop
This is the user-space counter part of kernel commit ccc007e4a746
("net: sched: add em_ipt ematch for calling xtables matches")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ematche uses YACC to parse ematch arguments and places them in struct bstr
linked lists.
It is useful to be able to receive parameters as argc,argv in order to use
getopt (and alike) argument parsers.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The tc_print_action() function did not print all tc actions
when e.g. TCA_ACT_MAX_PRIO actions were defined for a single
tc filter.
Signed-off-by: Adam Vyskovsky <adamvyskovsky@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit a233caa0aa ("json: make pretty printing optional") I get
following build failure:
LINK rtmon
../lib/libutil.a(json_print.o): In function `new_json_obj':
json_print.c:(.text+0x35): undefined reference to `show_pretty'
collect2: error: ld returned 1 exit status
make[1]: *** [rtmon] Error 1
make: *** [all] Error 2
It is caused by missing show_pretty variable in rtmon.
On the other hand tc/tc.c there are two distinct variables and single
matches() call that handles -pretty option thus setting show_pretty
will never happen. Note that since commit 44dcfe8201 ("Change
formatting of u32 back to default") show_pretty is used in tc/f_u32.c
so this is first place where -pretty introduced.
Furthermore other utilities like misc/ifstat.c and misc/nstat.c define
pretty variable, however only for their own purposes. They both support
JSON output and thus depend show_pretty in new_json_obj().
Assuming above use common variable to represent -pretty option, define
it in utils.c and declare in utils.h that is commonly used. Replace
show_pretty with pretty.
Fixes: a233caa0aa ("json: make pretty printing optional")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since JSON is intended for programmatic consumption, it makes
sense for the default output format to be concise as possible.
For programmer and other uses, it is helpful to keep the pretty
whitespace format; therefore enable it with -p flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
We have helper routines to support nested attribute addition into
netlink buffer: use them instead of open coding.
Use addattr_nest_compat()/addattr_nest_compat_end() where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Non-JSON tc qdisc output used to print the "requeues" statistic
twice. Commit 4fcec7f366 ("tc: jsonify stats2") tried to preserve
this behaviour for both standard output and JSON, but used the wrong
statistic (q.qlen). Also duplicating keys in JSON is not allowed,
so the second occurrence should be completely skipped with JSON.
Fixes: 4fcec7f366 ("tc: jsonify stats2")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make JSON output work with prio Qdiscs. This will also make
other qdiscs which reuse the print_qopt work, like mqprio or
pfifo_fast.
Note that there is a double space between "priomap" and first
prio number. Keep this original behaviour.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make JSON output work with RED Qdiscs. Float/double printing
helpers have to be added/uncommented to print the probability.
Since TC stats in general are not split out to a separate object
the xstats printed by this patch are not separated either.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The lexer will go with the longest match, so previously
the starting double quotes of a string would be swallowed by
the [^ \t\r\n()]+ pattern leaving the user no way to
actually use strings with escape sequences.
Fix this by not allowing this case to start with double
quotes.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
During qdisc creation it is possible to specify shared block for bot
ingress and egress. Pass this values to kernel according to the command
line options.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
So far, qdisc was the only handle that could be used to manipulate
filters. Kernel added support for using block to manipulate it. So add
the support to use block index to manipulate filters. The magic
TCM_IFINDEX_MAGIC_BLOCK indicates the block index is in use.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Jakub Kicinski
Luca Boccassi
David Ahern
Phil Sutter
Stephen Hemminger
Vinicius Costa Gomes
Vlad Buslov
Eelco Chaudron
Pieter Jansen van Vuuren
Toke Høiland-Jørgensen
Caleb Raitto
Yousuk Seung
Dave Taht
Florent Fourcot
Mahesh Bandewar
Nishanth Devarajan
Keara Leibovitz
Jiri Pirko
Or Gerlitz
Jesus Sanchez-Palencia
Qiaobin Fu
Jianbo Liu
fumihiko kakuma
Roi Dayan
Simon Horman
Roman Mashak
Marcelo Ricardo Leitner
Yuval Mintz
Serhey Popovych
Davide Caratti
Eyal Birger
Adam Vyskovsky
Wolfgang Bumiller