Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).
List the algorithm names that currently exist in the kernel.
Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.
Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.
This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>
My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.
I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some platforms like ppc64 have unsigned long long as 128 bits, and
the printf format string would cause errors. Resolve this by using
unsigned long long where necessary (or unsigned long).
Fixes Debian bug #700434
Need to table id in filter to be unsigned to avoid conversion to -1
The documentation for "ip" suggests that, when using multiple routing tables, the table ID can be an arbitrary 32 bit number. I've been writing a script that calculates a table Id based on an IP addresses and sets up tables accordingly based on it. This seems to work for everything I've tried except "ip route flush". If you specify a table to flush with an ID over 2^31, it flushes all IPv4 routing tables. For example:
Will delete all routing tables, including the default one. Needless to say, this is quite annoying. I think this is an upstream bug, but your opinions will be greatly appreciated.
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
Since do_help() has to return an int to fit in the table of commands,
it should actually return an int. This patch lets it do so.
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
This is useful to know the 'real' status of an interface (the flag IFF_PROMISC
is exported by the kernel only when the user set it explicitly, for example it
will not be exported when a tcpdump is running).
This information will be displayed when '-details' is provided by the user.
Example:
$ ip -d l l tun10
6: tun10: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode DEFAULT
link/sit 10.16.0.249 peer 10.16.0.121
sit remote 10.16.0.121 local 10.16.0.249 ttl inherit pmtudisc 6rd-prefix 2002::/16
promiscuity 2
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The 'inherit/STRING' or 'inherit/00..ff' syntax indicates that the
TOS field of tunneled packets should be copied from the original IP
header, but for non-IP packets the value STRING or 00..ff should be
used instead. (This syntax is already used by 'ip tunnel show'.)
Also clarify the man page and the command usage text (particularly
that the TOS is not specified as a decimal number).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Add command that go between network namespace names and process
identifiers. The code builds and runs agains older kernels but
only works on Linux 3.8+ kernels where I have fixed stat to work
properly.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sometimes "ip netns delete" fails because it can not delete the file a
network namespace was mounted on. If this only happened when a
network namespace was really in use this would be fine, but today it
is possible to pin all network namespaces by simply having a long
running process started with "ip netns exec".
Every mount is copied when a network namespace is created so it is
impossible to prevent the mounts from getting into other mount
namespaces. Modify all mounts in the files and subdirectories of
/var/run/netns to be shared mount points so that unmount events can
propogate, making it unlikely that "ip netns delete" will fail because
a directory is mounted in another mount namespace.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Ben Hutchings pointed out that the return value of do_netns is passed
to exit and the current convention of returning -1 for failure is
inconsitent with that reality.
Return EXIT_FAILURE instead of -1 and EXIT_SUCCESS instead of 0. To make
it clear that the return codes are expected to be passed to exit.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some systems are now following the advice in
linux/Documentation/sharedsubtrees.txt and running with all mount
points shared between all mount namespaces by default.
After creating the mount namespace call mount on / with
MS_SLAVE|MS_REC to modify all mounts in the new mount namespace to
slave mounts if they are shared or private mounts otherwise.
Guarnateeing that changes to the mount namespace created with
"ip netns exec" don't propgate to other namespaces.
Reported-by: Petr Šabata <contyk@redhat.com>
Tested-by: Petr Šabata <contyk@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Clang doesn't support the gcc extension for embeddeding flexible arrays
inside of structures. Use the slightly more portable alloca().
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
mroute was using /proc/net/ip_mr_[vif|cache] to display mroute entries. Hence,
only RT_TABLE_DEFAULT was displayed and only IPv4.
With rtnetlink, it is possible to display all tables for IPv4 and IPv6. The output
format is kept. Also, like before the patch, statistics are displayed when user specify
the '-s' argument.
The patch also adds the support of 'ip monitor mroute', which is now possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch adds a new flag to iproute2 for vxlan devices to enable
DOVE features. It also adds support for L2 and L3 switch lookup miss
netlink messages to "ip monitor".
Changes since v2: fix merge conflict
Changes since v1:
- split "dove" flag into separate feature flags:
- "proxy" for ARP reduction
- "rsc" for route short circuiting
- "l2miss" for L2 switch miss notifications
- "l3miss" for L3 switch miss notifications
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Example of the output:
$ ip monitor netconf&
[1] 24901
$ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
ipv6 dev lo forwarding off
ipv6 dev eth0 forwarding off
ipv6 all forwarding off
$ echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
ipv4 dev eth0 forwarding on
$ ip -6 netconf
ipv6 all forwarding on mc_forwarding 0
$ ip netconf show dev eth0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Minor cleanup of original patch, made sure netconf.h matched
result of santized kernel headers
When tclass or flowlabel field were updated, we only performed an OR with the
new value. For example, it was not possible to reset tclass:
ip -6 tunnel change ip6tnl2 tclass 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Flag IP6_TNL_F_IGN_ENCAP_LIMIT is set when encaplimit is none, but it was not
removed if encaplimit was set on update (ip tunnel change).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
IPv6 multipath routes were not accepted by "ip route" because an IPv4
address was expected for each gateway. Use `get_addr()` instead of
`get_addr32()`.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Stephen Hemminger
David Ward
James Chapman
Thomas Egerer
Petr Šabata
roopa
Eric W. Biederman
Kees van Reeuwijk
Nicolas Dichtel
Mike Frysinger
Strake
Zhi Yong Wu
David L Stevens
Vincent Bernat