Hello Stephen,
thanks für the commit of my last CAN patch.
Today i got a hint, that the help text of 'ip link' can be improved also.
Many thanks!
Oliver
Signed-Off-By: Oliver Hartkopp <oliver@hartkopp.net>
t's not a big problem, but it makes a better show in 'ip link show' on
CAN interfaces :-)
I also moved __PF(CAN,can) in ll_proto.c to the same position where it
can be found in if_ether.h .
The only thing i did not know if the __PF(CAN,can) in ll_types.c needs
to be put in #ifdef ARPHDR_CAN like __PF(HWX25,hwx25) is or not. You
definitely know that better than me.
"ip -6 tunnel show" displays only ip6ip6 tunnels not ip4ip6 tunnels
- it should display all irrespective of proto.
This is because the default tunnel proto is initialized to IPPROTO_IPV6 in ip6_tnl_parm_init() which is fine for a 'add' command but not for 'show'. This patch overrides proto with 0 signifying 'mode any' as the default in case of a 'show'.
please commit my patch below to the iproutes package. It just an incorrect
check so that adding an isatap tunnel with remote works, since it's needed if
one wants to use stateless autoconf. The current check makes tunnel mode
isatap unusable for all client users.
Hello Stephen and netdev people!
Currently you can configure "equalize" and it looks all fine and dandy.
The kernel has the interface defined, but apparently there's never actually
been any implementation for it (only a never merged patch in the 2.4 era).
I'm suggesting to drop the code to give any potential users of this feature
the benefit of receiving a proper error message. I see it unlikely that
this will be implemented in the near future, but if it ever happens
reviving the iproute2 side should be as easy as git revert this patch.
For more details see http://bugs.debian.org/149897
Regards,
Andreas Henriksson
This patch adds prefix lables for "ip monitor all" command to simplfy
understanding of the output.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
This patch adds exclusive support to enable monitoring
neighbour table entries in ip command.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
patch attached this time..
On Fri, 2008-08-08 at 10:01 -0400, jamal wrote:
> wireless drivers using wext is a prime example if you need a test case.
>
> cheers,
> jamal
ip: Allow for easier debug of buggy devices that dont send their names
With the old message couldnt tell which device had the bug.
This patch provides at least an ifindex to narrow it down.
Theres also no point in bailing out because of one bug; we
allow it to go on so we could dump as much info as we can
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
(router solicitation) becomes negative
How reproducible:
Always.
Steps to Reproduce:
1. Configure an IPv6 router to advertise a prefix with a short preferred
lifetime, e.g. 0.
2. Wait for the IPv6 autoconfiguration process to complete for an interface
<if> connected to a link where that router advertises.
3. Run ip -6 show dev <if>.
Actual results:
The preferred lifetime will have become negative, but it is printed as an
unsigned integer. The preferred lifetime to be displayed will therefore be
close to UINT_MAX.
“ip maddr show” on an infiniband address causes a stack corruption
because the length of the address for Infiniband (20 bytes, as
described in kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4
__u32 to 8 and also adds a check to avoid overriding the available
size while parsing the hardware address.
This bug affects current upstream code AFAICT.
Hope this helps,
Cheers,
Olivier.
“ip maddr show ib0” causes a stack corruption because the length of the address
for Infiniband (20 see kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4 u32 to 8
and adds a check to avoid overriding the available size while parsing the
hardware address.
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a variant of Patrick McHardy patch for help text.
Add help for ip link add and ip link delete.
The help conditional on what the kernel supports.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Fix confusing error message noticed by Martin Josefsson:
Fix typo noticed by Phil Oester: information vs. informatin
# ip link add
RTNETLINK answers: Operation not supported
The reason is missing device type information, refuse this and print a message.
Signed-off-by: Patrick McHardy <kaber@trash.net>
For some reason "ip link add help" is currently not supported when using
the new rtnl_link API. Fix that.
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch allows the user to create/manage AEAD algorithms with
the ip xfrm command. AEAD algorithms are also known as combined-
mode algorithms. They provide the functionality of encryption
algorithms as well as authentication algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hello Rafael Almeida.
I noticed your patch adding DESTDIR support in the latest iproute2 release.
Much appreciated! Soon the debian packages might be able to move to actually
using "make install" rather then it's own installation procedure when
building packages. I've noticed something that will break though....
Debian packages usually sets DESTDIR=debian/tmp/ and packages the contents
of that directory as if it where the root file system. This will break
the /usr/lib/{tc,ip}/ module loading, because they DESTDIR (/usr) will be
/whatever-the-build-path-was/debian/tmp/lib/{tc,ip}/.
I beleive others usually call this the LIBDIR to make the separation between
DISTDIR being the (possibly temporary) place things are put when build is
done, and LIBDIR (and others) are used for actual runtime paths.
I'm attaching a patch that I think fixes this, but would be really happy if
you could have a look at to verify I'm not screwing something up.
--
Regards,
Andreas Henriksson
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
This is the patch for iproute for configuring GVRP.
commit 32143eed8b706e5c6554ab42903533b3bccdc060
Author: Patrick McHardy <kaber@trash.net>
Date: Thu Jul 3 19:05:09 2008 +0200
[IPROUTE]: iflink_vlan: support GVRP flag
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
On tis, 2008-07-22 at 20:21 +0200, martin f krafft wrote:
> piper:~|master|% sudo ip a flush dev eth0 >/dev/null
> Nothing to flush.
>
> It should just shut up, shouldn't it? :)
The patch below makes the "Nothing to flush" only visible when show
statistics flag is given, and then only to stdout rather then stderr.
$ sudo ./ip/ip -s addr flush dev skif
Nothing to flush.
$ sudo ./ip/ip addr flush dev skif
$
(See http://bugs.debian.org/492196 )
After changing the DESTDIR the installated binaries have some issues
due to hard coded paths. For example, using distributions on NetEm
would segfault.
I've changed iplink.c and tc_util.c so they are now aware of DESTDIR.
Along with that change I needed to change the main Makefile so it
defines the DESTDIR macro when calling gcc.
I also changed the paths so that during the installation sbin, etc,
share and lib directories are created directly inside of the DESTDIR,
instead of creating a usr directory inside that. That's the behaviour
of most packages out there, so I think most users will be expecting
that to happen.
The command "ip addrlabel add/del" displays incorrect error message when provided with insufficient inputs. This patch fixes it in par with "ip addr add/del".
Currently:
# ./ip addrlabel add
RTNETLINK answers: Numerical result out of range
# ./ip addr add
Not enough information: "dev" argument is required.
After patch:
# ./ip addrlabel add
Not enough information: "prefix" argument is required.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Hi Stephen,
I resend you this patch once more. This time I updated the documentation
too (may be that was the reason why you didn't take it before?).
Please tell me if there are other things missing in this patch
It applies on iproute2 git tree.
Regards,
Benjamin
Description:
------------
This patch adds support for the IFLA_NET_NS_PID type. It is used to
move network devices between network namespaces.
The syntax is:
ip link set DEVICE netns PID
PID is the pid of a process in the target network namespace.
(Daniel Lezcano is the original author).
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Hi Stephen:
[IP] xfrm: Allow replay setting
For certain applications there is a requirement to start the
sequence number from a point other than the default. As it
is the kernel provides an interface to do that but it isn't
available through the ip(8) command. Since we're encouraging
people to migrate over to ip(8) for manual keying, it is useful
to have this ability there.
This patch adds support for setting replay sequence numbers
through ip(8).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
Add more aliases to synchronize IPv4 and IPv6 tunnel command, e.g.,
IPv4: hoplimit (alias to ttl), tclass (alias to tos)
IPv6: dsfield, tos (alias to tc, or tclass), ttl (alias to hoplimit)
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
The prefix bit lenght value was not updated, resulting in incorrect addrlabel
entry. This patch fixes that issue.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Some usages of rtnl_send could cause errors (ie flush requests)
others do a listen afterwards.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Sorry. The pref and prio options are actually synonyms.
This reverts part of commit 576c63ee59.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Sorry. The pref and prio options are actually synonyms.
This reverts part of commit 576c63ee59.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Use santized kernel header for veth.h and put in correct place
to prevent possible future problems with API.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This routine parses CLI attributes, describing generic link
parameters such as name, address, etc.
This is mostly copy-pasted from iplink_modify().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Oliver Hartkopp
Srivats P
Sascha Hlusiak
Andreas Henriksson
Varun Chandramohan
Petr Jediný
jamal
Stephen Hemminger
Benedikt Gollatz
Olivier Fourdan
Herbert Xu
Patrick McHardy
Rafael Almeida
Benjamin Thery
Daniel Silverstone
Mike Frysinger
YOSHIFUJI Hideaki / 吉藤英明
Marcela Maslanova
Stephen Hemminger
Vitaliy Gusev
Pavel Emelyanov