This patch only does cleanup and do not introduce any functional
changes.
We do some code refactoring of print_ctrlmode() in prevision of the
upcoming patch:
- remove the first argument of print_ctrlmode(). It is a pointer to
FILE and is never used.
- add a new function argument: enum output_type t in order to
specify the output type (i.e. PRINT_{FP,JSON,ANY}).
- add a new function argument: const char *key in order to specify
the name of the json array (e.g. "ctrlmode").
- replace the _PF() macro with the print_flag() function to increase
readability.
- directly return if none of the flags are set (previously, this
check was done before calling the function).
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: David Ahern <dsahern@kernel.org>
The configuration ranges in print_usage() are taken from "Table 8 -
Time segments' minimum configuration ranges" in section 11.3.1.2
"Configuration of the bit time parameters" of ISO 11898-1.
The standard clearly specifies that "implementations may allow time
segments that exceed the minimum required configuration ranges
specified in Table 8".
Because no maximum ranges are given in the standard, all given ranges
{ a..b } are simply replaced with { NUMBER }.
The actual ranges are specific to each device and can be confirmed
doing:
$ ip --details link show can0
1: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10
link/can promiscuity 0 minmtu 0 maxmtu 0
can state STOPPED restart-ms 0
ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Finally, the unit (bps, tq, ns or ms) are given. The rationale to add
the units is that the TDC parameters (that will be introduced in the
upcoming patches) are measured in a different unit than the other
bittiming parameters: clock period (a.k.a. minimum time quantum)
instead of time quantum. Adding the units disambiguates things.
For reference, before the change:
$ ip link set can0 type can help
Usage: ip link set DEVICE type can
[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
phase-seg2 PHASE-SEG2 [ sjw SJW ] ]
[ dbitrate BITRATE [ dsample-point SAMPLE-POINT] ] |
[ dtq TQ dprop-seg PROP_SEG dphase-seg1 PHASE-SEG1
dphase-seg2 PHASE-SEG2 [ dsjw SJW ] ]
[ loopback { on | off } ]
[ listen-only { on | off } ]
[ triple-sampling { on | off } ]
[ one-shot { on | off } ]
[ berr-reporting { on | off } ]
[ fd { on | off } ]
[ fd-non-iso { on | off } ]
[ presume-ack { on | off } ]
[ restart-ms TIME-MS ]
[ restart ]
[ termination { 0..65535 } ]
Where: BITRATE := { 1..1000000 }
SAMPLE-POINT := { 0.000..0.999 }
TQ := { NUMBER }
PROP-SEG := { 1..8 }
PHASE-SEG1 := { 1..8 }
PHASE-SEG2 := { 1..8 }
SJW := { 1..4 }
RESTART-MS := { 0 | NUMBER }
...and after it:
$ ip link set can0 type can help
Usage: ip link set DEVICE type can
[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
phase-seg2 PHASE-SEG2 [ sjw SJW ] ]
[ dbitrate BITRATE [ dsample-point SAMPLE-POINT] ] |
[ dtq TQ dprop-seg PROP_SEG dphase-seg1 PHASE-SEG1
dphase-seg2 PHASE-SEG2 [ dsjw SJW ] ]
[ loopback { on | off } ]
[ listen-only { on | off } ]
[ triple-sampling { on | off } ]
[ one-shot { on | off } ]
[ berr-reporting { on | off } ]
[ fd { on | off } ]
[ fd-non-iso { on | off } ]
[ presume-ack { on | off } ]
[ cc-len8-dlc { on | off } ]
[ restart-ms TIME-MS ]
[ restart ]
[ termination { 0..65535 } ]
Where: BITRATE := { NUMBER in bps }
SAMPLE-POINT := { 0.000..0.999 }
TQ := { NUMBER in ns }
PROP-SEG := { NUMBER in tq }
PHASE-SEG1 := { NUMBER in tq }
PHASE-SEG2 := { NUMBER in tq }
SJW := { NUMBER in tq }
RESTART-MS := { 0 | NUMBER in ms }
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: David Ahern <dsahern@kernel.org>
Currently, ip neigh does not support the NTF_EXT_MANAGED flag. Add cmdline
support.
Usage example:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 managed extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a managed extern_learn REACHABLE
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Currently, ip neigh does not support the NTF_USE flag. Similar to other flags
such as extern_learn, add cmdline support. The flag dump support is explicitly
missing here, since the kernel does not propagate the flag back to user space.
Usage example:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Fix up spacing to consistently add a single ' ' after an attribute has
been printed. Currently, it is a bit of a mix of before and after which
can lead to double spacing to be printed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Two new commands to manage default policies:
- ip xfrm policy setdefault
- ip xfrm policy getdefault
And the corresponding part in 'ip xfrm monitor'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
David reported ipmptcp breaks hard the build when updating the
relevant kernel headers.
We should be more careful in the header section, explicitly
including all the required dependencies respecting the usual order
between systems and local headers.
Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch adds support for the three IOAM encap modes that were introduced:
inline, encap and auto.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Fix rogue "tab after spaces" used for indentation of the documentation.
This causes rendering issues on terminals using a non-standard tab width.
Signed-off-by: Frank Villaro-Dixon <frank.villaro@infomaniak.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since we use the cache netlink socket for each nexthop we can keep it open
instead of opening and closing it on every add call. The socket is opened
once, on the first add call and then reused for the rest.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
the following command:
# ip -j mptcp endpoint show
prints a JSON array that misses the terminating bracket. Fix this calling
delete_json_obj() to balance the call to new_json_obj().
Fixes: 7e0767cd86 ("add support for mptcp netlink interface")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Andrea Claudi <aclaudi@redhat.com>
Add a new helper print_cache_nexthop replacing print_nexthop which can
update the nexthop cache if the process_cache argument is true. It is
used when monitoring netlink messages to keep the nexthop cache up to
date with nexthop changes happening. For the old callers and anyone
who's just dumping nexthops its _nocache version is used which is a
wrapper for print_cache_nexthop.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
If -d (show_details) is used when printing/monitoring routes then print
detailed nexthop information in the field "nh_info". The nexthop is also
cached for future searches.
Output looks like:
unicast 198.51.100.0/24 nhid 103 table 3 proto boot scope global
nh_info id 103 group 101/102 type resilient buckets 512 idle_timer 0 unbalanced_timer 0 unbalanced_time 0 scope global proto unspec
nexthop via 169.254.2.22 dev veth2 weight 1
nexthop via 169.254.3.23 dev veth4 weight 1
The nh_info field has the same format as ip -d nexthop show would've had
for the same nexthop id.
For completeness the JSON version looks like:
{
"type": "unicast",
"dst": "198.51.100.0/24",
"nhid": 103,
"table": "3",
"protocol": "boot",
"scope": "global",
"flags": [ ],
"nh_info": {
"id": 103,
"group": [ {
"id": 101
},{
"id": 102
} ],
"type": "resilient",
"resilient_args": {
"buckets": 512,
"idle_timer": 0,
"unbalanced_timer": 0,
"unbalanced_time": 0
},
"scope": "global",
"protocol": "unspec",
"flags": [ ]
},
"nexthops": [ {
"gateway": "169.254.2.22",
"dev": "veth2",
"weight": 1,
"flags": [ ]
},{
"gateway": "169.254.3.23",
"dev": "veth4",
"weight": 1,
"flags": [ ]
} ]
}
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a helper which looks for a nexthop in the cache and if not found
reads the entry from the kernel and caches it. Finally the entry is
printed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a static nexthop cache in a hash with 1024 buckets and helpers to
manage it (link, unlink, find, add nexthop, del nexthop). Adding new
nexthops is done by creating a new rtnl handle and using it to retrieve
the nexthop so the helper is safe to use while already reading a
response (i.e. using the global rth).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out ipnh_get_id's rtnl talk portion into a separate helper which
will be reused later to retrieve nexthops for caching.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out nexthop entry structure printing from print_nexthop,
effectively splitting it into parse and print parts.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out the nexthop attribute parsing and parse attributes into a
nexthop entry structure which is then used to print.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a structure which describes a nexthop, it will be later used to
parse, print and cache nexthops.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Now that we have resilient group structure split print_nh_res_group into
a parse and print functions, print_nexthop calls the parse function
first to parse the attributes into the structure and then uses the print
function to print the parsed structure.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a structure which describes a resilient nexthop group. It will be
later used for parsing.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Export a new __print_rta_gateway that takes a prepared gateway string to
print which is also used by print_rta_gateway for consistent format.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
We need print_rta_if() to take ifindex directly so later we can use it
with cached converted nexthop objects.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Commit d3432bf10f17 ("net: Support filtering interfaces on no master")
in the kernel added support for filtering interfaces/neighbours that
have no master interface.
This patch completes it and adds this support to iproute2:
1. ip link show nomaster
2. ip address show nomaster
3. ip neighbour {show | flush} nomaster
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Not sure if anyone uses the routel script. The script was
a combination of ip route, shell and awk doing command scraping.
It is now possible to do this much better using the JSON
output formats and python.
Rewriting also fixes the bug where the old script could not parse
the current output format. At the end was getting:
/usr/bin/routel: 48: shift: can't shift that many
The new script also has IPv6 as option.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script is old and limited to IPv4.
Using ip route command directly is better option.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script was from olden days of ifcfg.
I don't see any distribution using it and it is time to put
it out to pasture.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script was a one off hack for a special case.
Now that ip commands have better formatting, there is no
real reason for it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
When creating a tap with multi_queue flag, this flag is not displayed
when dumping:
$ ip tuntap add tap23 mode tap multi_queue
$ ip tuntap
tap23: tap persist0x100
While at it, add a space between known flags and hexdump of unknown
ones.
Fixes: c41e038f48 ("iptuntap: allow creation of multi-queue tun/tap device")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Iproute2 has not supported DECnet or IPX since version 5.0.
There were some leftover support in the ip options flags
and parsing, remove these.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
lacp_active specifies whether to send LACPDU frames periodically.
If set on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
v2: use strcmp instead of match for new options.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Presently, if a Geneve or VXLAN interface was created with 'external',
it's not possible for a user to determine e.g. the value of 'dstport'
after creation. This change fixes that by avoiding early returns.
This change partly reverts commit 00ff4b8e31 ("ip/tunnel: Be consistent
when printing tunnel collect metadata").
Signed-off-by: Ilya Dmitrichenko <errordeveloper@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch addresses Stephen's comment:
"""
> + print_null(PRINT_ANY, "", "\n", NULL);
Use print_nl() since it handles the case of oneline output.
Plus in JSON the newline is meaningless.
"""
It also removes two useless print_null's.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides support for adding, listing and removing IOAM namespaces
and schemas with iproute2. When adding an IOAM namespace, both "data" (=u32)
and "wide" (=u64) are optional. Therefore, you can either have none, one of
them, or both at the same time. When adding an IOAM schema, there is no
restriction on "DATA" except its size (see IOAM6_MAX_SCHEMA_DATA_LEN). By
default, an IOAM namespace has no active IOAM schema (meaning an IOAM namespace
is not linked to an IOAM schema), and an IOAM schema is not considered
as "active" (meaning an IOAM schema is not linked to an IOAM namespace). It is
possible to link an IOAM namespace with an IOAM schema, thanks to the last
command below (meaning the IOAM schema will be considered as "active" for the
specific IOAM namespace).
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Make use of the already available brief flag and print the basic details of
the IPv4 or IPv6 neighbour cache in a tabular format for better readability
when the brief output is expected.
$ ip -br neigh
172.16.12.100 bridge0 b0:fc:36:2f:07:43
172.16.12.174 bridge0 8c:16:45:2f:bc:1c
172.16.12.250 bridge0 04:d9:f5:c1:0c:74
fe80::267b:9f70:745e:d54d bridge0 b0:fc:36:2f:07:43
fd16:a115:6a62:0:8744:efa1:9933:2c4c bridge0 8c:16:45:2f:bc:1c
fe80::6d9:f5ff:fec1:c74 bridge0 04:d9:f5:c1:0c:74
And add "ip neigh show" to the list of ip sub commands mentioned in the man
page that support the brief output in tabular format.
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for mcast_vlan_snooping option which controls per-vlan
multicast snooping, also update the man page.
Syntax: $ ip link set dev bridge type bridge mcast_vlan_snooping 0/1
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add arp_validate filter support based on kernel commit 896149ff1b2c
("bonding: extend arp_validate to be able to receive unvalidated arp-only traffic")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
lacp_active specifies whether to send LACPDU frames periodically.
If set on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
v2: use strcmp instead of match for new options.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Presently, if a Geneve or VXLAN interface was created with 'external',
it's not possible for a user to determine e.g. the value of 'dstport'
after creation. This change fixes that by avoiding early returns.
This change partly reverts commit 00ff4b8e31 ("ip/tunnel: Be consistent
when printing tunnel collect metadata").
Signed-off-by: Ilya Dmitrichenko <errordeveloper@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch addresses Stephen's comment:
"""
> + print_null(PRINT_ANY, "", "\n", NULL);
Use print_nl() since it handles the case of oneline output.
Plus in JSON the newline is meaningless.
"""
It also removes two useless print_null's.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides support for adding, listing and removing IOAM namespaces
and schemas with iproute2. When adding an IOAM namespace, both "data" (=u32)
and "wide" (=u64) are optional. Therefore, you can either have none, one of
them, or both at the same time. When adding an IOAM schema, there is no
restriction on "DATA" except its size (see IOAM6_MAX_SCHEMA_DATA_LEN). By
default, an IOAM namespace has no active IOAM schema (meaning an IOAM namespace
is not linked to an IOAM schema), and an IOAM schema is not considered
as "active" (meaning an IOAM schema is not linked to an IOAM namespace). It is
possible to link an IOAM namespace with an IOAM schema, thanks to the last
command below (meaning the IOAM schema will be considered as "active" for the
specific IOAM namespace).
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Make use of the already available brief flag and print the basic details of
the IPv4 or IPv6 neighbour cache in a tabular format for better readability
when the brief output is expected.
$ ip -br neigh
172.16.12.100 bridge0 b0:fc:36:2f:07:43
172.16.12.174 bridge0 8c:16:45:2f:bc:1c
172.16.12.250 bridge0 04:d9:f5:c1:0c:74
fe80::267b:9f70:745e:d54d bridge0 b0:fc:36:2f:07:43
fd16:a115:6a62:0:8744:efa1:9933:2c4c bridge0 8c:16:45:2f:bc:1c
fe80::6d9:f5ff:fec1:c74 bridge0 04:d9:f5:c1:0c:74
And add "ip neigh show" to the list of ip sub commands mentioned in the man
page that support the brief output in tabular format.
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
We started to use in-kernel filtering feature which allows to get only
needed tables (see iproute_dump_filter()). From the kernel side it's
implemented in net/ipv4/fib_frontend.c (inet_dump_fib), net/ipv6/ip6_fib.c
(inet6_dump_fib). The problem here is that behaviour of "ip route save"
was changed after
c7e6371bc ("ip route: Add protocol, table id and device to dump request").
If filters are used, then kernel returns ENOENT error if requested table
is absent, but in newly created net namespace even RT_TABLE_MAIN table
doesn't exist. It is really allocated, for instance, after issuing
"ip l set lo up".
Reproducer is fairly simple:
$ unshare -n ip route save > dump
Error: ipv4: FIB table does not exist.
Dump terminated
Expected result here is to get empty dump file (as it was before this
change).
v2: reworked, so, now it takes into account NLMSGERR_ATTR_MSG
(see nl_dump_ext_ack_done() function). We want to suppress error messages
in stderr about absent FIB table from kernel too.
v3: reworked to make code clearer. Introduced rtnl_suppressed_errors(),
rtnl_suppress_error() helpers. User may suppress up to 3 errors (may be
easily extended by changing SUPPRESS_ERRORS_INIT macro).
v4: reworked, rtnl_dump_filter_errhndlr() was introduced. Thanks
to Stephen Hemminger for comments and suggestions
v5: space fixes, commit message reformat, empty initializers
Fixes: c7e6371bc ("ip route: Add protocol, table id and device to dump request")
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Vincent Mailhol
Taehee Yoo
Daniel Borkmann
Nicolas Dichtel
Stephen Hemminger
David Ahern
Justin Iurman
Frank Villaro-Dixon
Nikolay Aleksandrov
Davide Caratti
Lahav Schlesinger
David Marchand
Hangbin Liu
Ilya Dmitrichenko
Gokul Sivakumar
Alexander Mikhalitsyn