Add dump support for vlan multicast router ports and their details if
requested. If details are requested we print 1 entry per line, otherwise
we print all router ports on a single line similar to how mdb prints
them.
Looks like:
$ bridge vlan global show vid 100
port vlan-id
bridge 100
mcast_snooping 1 mcast_querier 0 mcast_igmp_version 2 mcast_mld_version 1 mcast_last_member_count 2 mcast_last_member_interval 100 mcast_startup_query_count 2 mcast_startup_query_interval 3125 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000
router ports: ens20 ens16
Looks like (with -s):
$ bridge -s vlan global show vid 100
port vlan-id
bridge 100
mcast_snooping 1 mcast_querier 0 mcast_igmp_version 2 mcast_mld_version 1 mcast_last_member_count 2 mcast_last_member_interval 100 mcast_startup_query_count 2 mcast_startup_query_interval 3125 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000
router ports: ens20 187.57 temp
ens16 118.27 temp
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for new bridge vlan command grouping called global which
operates on global options. The first command it supports is "show".
To do that we update print_vlan_rtm to recognize the global vlan options
attribute and parse it properly.
Man page and help are also updated with the new command.
Syntax is: $ bridge vlan global show [ vid VID ] [ dev DEV ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for vlan activity monitoring, we display vlan notifications on
vlan add/del/options change. The man page and help are also updated
accordingly.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Use the new bridge vlan rtm dump helper to dump all of the available
vlan information when -details (-d) is used with vlan show. It is also
capable of dumping vlan stats if -statistics (-s) is added.
Currently this is the only interface capable of dumping per-vlan
options. The vlan dump format is compatible with current vlan show, it
uses the same helpers to dump vlan information. The new addition is one
line which will contain the per-vlan options (similar to ip -d link show
for ports). Currently only the vlan STP state is printed.
The call uses compressed vlan format by default.
Example:
$ bridge -s -d vlan show
port vlan-id
virbr1 1 PVID Egress Untagged
state forwarding
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a helper which parses an STP state string to its numeric value.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Rename print_portstate to print_stp_state in preparation for use by vlan
code as well (per-vlan state), and export it. To be in line with the new
naming rename also port_states to stp_states as they'll be used for
vlans, too.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The output of vlan show was broken previous change to use json_print.
Clean the code up and return to original format.
Note: the JSON syntax has changed to make the bridge vlan
show more like other outputs (e.g. ip -j li show).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use new functions from json_print to simplify code.
Provide standard flag for colorizing output.
The shortened -c flag is ambiguous it could mean color or
compressvlan; it is now changed to mean color for consistency
with other iproute2 commands.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
IFLA_BRIDGE_VLAN_INFO parsing logic will be used in link and vlan
processing code, so it makes sense to move it in the separate function.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Recently a new temp router port mode was added and with it the dumped
information was extended similar to how mdb entries were done. This
patch adds support to dump the new information by using the "-s" switch.
Example:
$ bridge -d -s mdb show
dev br0 port eth1 grp ff02::1:ffbf:5716 temp 234.39
dev br0 port eth1 grp 239.0.0.2 temp 97.17
dev br0 port eth1 grp 239.0.0.3 temp 105.36
router ports on br0: eth1 0.00 permanent
router ports on br0: eth2 254.87 temp
It also updates the bridge man page.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Recently support was added to the kernel to be able to add more per-mdb
entry attributes via standard netlink attributes of type MDBA_MDB_EATTR_.
This patch adds support to iproute2 to parse and output these
attributes. The first exported attribute is the mdb "timer" value which
is shown only when the "-s" iproute2 arg is used.
Example:
$ bridge -s mdb show
dev br0 port eth1 grp 239.0.0.11 permanent 0.00
dev br0 port eth1 grp 239.0.0.10 temp 244.15
dev br0 port eth1 grp 239.0.0.1 temp 245.21
dev br0 port eth1 grp 239.0.0.5 temp 246.43
dev br0 port eth2 grp 239.0.0.5 temp 248.44
dev br0 port eth1 grp 239.0.0.2 temp 245.32
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add netlink support bridge port attributes such as cost, priority, state
and flags. This also adds support for HW mode such as VEPA or VEB.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Recent kernel patches added support for VLAN filtering on the bridge.
This functionality allows one to turn a basic bridge into a VLAN bridge,
where VLANs dicatate packet forwarding and header transformation.
To configure the VLANs on the bridge and its ports a new command is
added to the 'bridge' utility.
# bridge vlan add dev eth0 vid 10 pvid untagged brdev
# bridge vlan add
# bridge vlan delete dev eth0 vid 10
# bridge vlan show
This command supports the following flags:
master - peform the operation on the software bridge device. This is
the default behavior.
self - perform the operation on the hardware associated with the port.
This flag is required when the device is the bridge device and
the configuration is desired on the bridge device itself (not
one of the ports).
pvid - Set the PVID (port vlan id) for a given port. Any untagged
frames arriving on the port will be assigned to this vlan.
untagged - Sets the egress policy of for a given vlan. Default port
egress policy is tagged. Set this flag if you wish traffic
associated with this VLAN to exit the port untagged.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
This patch implements `bridge monitor mdb`.
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
Sample output:
# ./bridge/bridge mdb show dev br0
bridge br0 port eth1 group 224.8.8.9
bridge br0 port eth0 group 224.8.8.8
# ./bridge/bridge -d mdb show dev br0
bridge br0 port eth1 group 224.8.8.9
bridge br0 port eth0 group 224.8.8.8
router ports on br0: eth0
Signed-off-by: Cong Wang <amwang@redhat.com>
Nikolay Aleksandrov
Nikolay Aleksandrov
David Ahern
Stephen Hemminger
Stephen Hemminger
Roman Mashak
Roopa Prabhu
Vlad Yasevich
Cong Wang
Stephen Hemminger