Use switch () instead of if () to compare tunnel type to fit into 80
columns and make code more readable. Print "\n" using fputc().
In iptunnel.c abstract tunnel parameters matching code in iptunnel.c
into ip_tunnel_parm_match() helper to conform with ip6tunnel.c. Use
memset() to initialize @p1.
In ip6tunnel.c no need to call ll_name_to_index() with name twice: just
use found previously index. Do not initialize @p1: this is done in
ip6_tnl_parm_init().
This is to show real differences between ip and ipv6 do_tunnels_list()
implementations and prepare for upcoming unification of them.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is first step to move tunnel code to use rtnl dump interface
instead of /proc/net/dev read.
Make tnl_print_stats() to accept @struct rtnl_link_stats64 parameter,
introduce tnl_get_stats() that will parse line from /proc/net/dev into
@struct rtnl_link_stats64.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Assume all statistics in ip(8) represented either by IFLA_STATS64 or
IFLA_STATS is 64 bit. It is clean that we can store __u32 counters of
@struct rtnl_link_stats in __u64 counters in @struct rtnl_link_stats64.
New get_rtnl_link_stats_rta() follows __print_link_stats() behaviour on
handling of stats attribute: copy no more than size of data structure
and no less than attribute length zeroing rest.
Drop print_link_stats32() as it's functionality can be handled by 64bit
variant. Move code from __print_link_stats() to print_link_stats64() and
finally rename print_link_stats64() to __print_link_stats().
More users of introduced function will come in future.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
To show real differences between these two variants adjust whitespace
intendation and use print_uint() instead of print_int() as all members
in both @struct rtnl_link_stats and @struct rtnl_link_stats64 are
unsigned.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For JSON and colorization, make common code a function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make printing of multipath attributes a function to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since these fields are printed in both route and multipath case;
avoid duplicating code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make a separate function to improve readability and enable
easier JSON conversion.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make common function for decoding cacheinfo.
This code may print more info than old version in some cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Refactor to reduce size of print_route and improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both next hop and route need to decode flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
We have helper routines to support nested attribute addition into
netlink buffer: use them instead of open coding.
Use addattr_nest_compat()/addattr_nest_compat_end() where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
1) Rename @hdr parameter to @n to be coherent with rest of the parsing
code.
2) Use NLMSG_DATA() to get pointer to the data after nlmsghdr instead
of calculating it directly in ip/tunnel code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This reverts commit 63891c7013.
It seems print_linkinfo_brief() never accepts filter different than
default one and David Ahern suggests to revert it instead of making
new change that actually do revert.
Conflicts:
ip/ipaddress.c
ip/iplink.c
These are caused by JSON support addition after commit we reverting.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The JSON object name for statistics in ip link show is "stats644".
Looks like a typo, commit d0e720111a ("ip: ipaddress.c: add support
for json output") contains an example with the expected "stats64" name.
The fact that no one has noticed until now is probably an indication
that no one is using this object. Hopefully it's not too late to fix
this, although IIUC this has already been in 4.13 and 4.14 releases :S
Fixes: d0e720111a ("ip: ipaddress.c: add support for json output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce and use tnl_print_endpoint() helper to print of tunnel
endpoint address.
Note that for AF_INET and AF_INET6 inet_ntop(3) is used that may return
NULL in case of failure and while unlikely format_host_rta() might
return NULL too. Handle this case when passing local/remote to
print_string().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there remove & from inet_prefix.data when since it is array.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There are couple of minor improvements:
1) Check erspan_ver == 2 in gre6. It still could
be 1 if erspan_idx is 0.
2) Add tunnel encapsulation attributes only when
collect metadata not in effect in gre.
3) Trivial: address checkpatch issues.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print only "external" if collect meta data attribute
is given: rest of parameters are irrelevant. This is
to follow gre6.
For both JSON and non-JSON output use "external" for
all tunnels including vxlan and geneve.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In prepare of link_vti.c and link_vti6.c merge:
1) Make @fwmark of __u32 type instead of unsigned int
in vti to match with rest tunneling code.
2) Report when unable to translate @link network device
name to index instead of silently exiting in vti6.
3) Remove newline separating local/remote attributes
from the ikey/okey in vti6 to match vti module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Handle "inherit" case properly for gre6 and ip6tnl.
Use get_u8() in gre to parse ttl/hoplimit.
Be consistent about "hlim" alias to ttl/hoplimit
support.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Few minor changes after merge of 'master' into 'net-next' branch:
1) Follow 80 line length for printing erspan_index parameter
as we did in master with commit 2a8d0f6e9c ("gre/tunnel:
Print erspan_index using print_uint()").
2) Remove remnants of encapsulation option printing: now it
is done using tnl_print_encap() helper in commit bad76e6b1f
("ip/tunnel: Abstract tunnel encapsulation options printing").
Fixes: 8c75f69411 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We return constant string from tnl_strproto(), no need
to copy it to temporary buffer and then return such
buffer as const: return constant string instead.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both of these two changes are missing for link_vti6.c:
commit 8b47135474 ("ip: link: Unify link type help functions a bit")
commit 561e650eff ("ip link: Shortify printing the usage of link type")
Replay them on link_vti6.c to bring link type help functions
inline with other tunneling code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For vti6 tunnel we print [io]key in dotted-quad notation
(ipv4 address) while in vti we do that in hex format.
For vti tunnel we print [io]key only if value is not
zero while for vti6 we miss such check.
Unify vti and vti6 tunnel [io]key output.
While here enlarge s2 buffer to the same size as in rest
of tunnel support code (64 bytes) and check return from
inet_ntop().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
One is missing in JSON output because fprintf()
is used instead of print_uint().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Get rid of code duplications and consolidate encapsulation
options printing in single function - tnl_print_encap().
Introduce and use tnl_encap_str() to format encapsulation
option string according to tempate and given values to avoid
code duplication and simplify it.
Use print_string() instead of fputs() and fprintf() to
print encapsulation for !is_json_context().
Print "unknown" parameter for "encap" type in PRINT_FP
context using "%s " format specifier and benefit from
complite time string merge.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need for custom SPRINT_BUF() and snprintf() 0x%x
value to this buffer: we can use print_0xhex() instead
of print_string().
In link_iptnl.c use s2 instead of s1 buffer and remove
s1.
While there adjust fwmark option print order in iptnl
and ip6tnl to get it match each other.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For ip tunnels tos can be 0 when not configured, 1 when
inherited from encapsulated packet and rest specifying
diffserv (rfc2474) or tos (rfc1349) bits. It is stored
in packet tos/diffserv field and returned in tos
netlink attribute to userspace.
Simplify and unify tos printing by using print_0xhex()
and print_string() instead of fprintf() to output values.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both ttl/hoplimit is from 1 to 255. Zero has special meaning:
use encapsulated packet value. In ip-link(8) -d output this
looks like "ttl/hoplimit inherit". In JSON we have "int" type
for ttl and therefore values from 0 (inherit) to 255.
To do the best in handling ttl/hoplimit we need to accept
both cases: missing attribute in netlink dump and zero value
for "inherit"ed case. Last one is broken since JSON output
introduction for gre/iptnl versions and was never true for
gre6/ip6tnl.
For all tunnels, except ip6tnl change JSON type from "int" to
"uint" to reflect true nature of the ttl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We need NEXT_ARG() to get *argv pointing to "alias"
parameter value. Overwise we get and check "alias"
string length.
Fixes: f88becf35e ("iplink: Process "alias" parameter correctly")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When using the new minimum rate API and providing only one parameter
(minimum rate/maximum rate), we query the VF min and max rate regardless
of kernel support.
This resulted in segmentation fault in ipaddr_loop_each_vf, which tries
to access NULL pointer.
This patch identifies such cases by testing the VF table for NULL
pointer in IFLA_VF_RATE, and aborts the operation.
Aborting on the first VF is valid since if the kernel does not support
the new API for the first VF, it will not support it for the other VFs
as well.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
According to the documentation (man ip-link), the minimum TXRATE should
be always <= Maximum TXRATE, but commit f89a2a05ff ("Add support to
configure SR-IOV VF minimum and maximum Tx rate through ip tool") didn't
enforce it.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Serhey Popovych
Stephen Hemminger
David Ahern
Jakub Kicinski
Gal Pressman