Observed on the Linux 3.18:
# ip netns
RTNETLINK answers: Operation not supported
net0
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: d182ee1307 ("ipnetns: allow to get and set netns ids")
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Adding basic support to create virtual devices using 'ip'
utility. Following is the syntax -
ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
e.g. ip link add link eth0 ipvl0 type ipvlan mode l3
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Added 'ip fou...' commands to enable/disable UDP ports for doing
foo-over-udp and Generic UDP Encapsulation variant. Arguments are port
number to bind to and IP protocol to map to port (for direct FOU).
Examples:
ip fou add port 7777 gue
ip fou add port 8888 ipproto 4
The first command creates a GUE port, the second creates a direct FOU
port for IPIP (receive payload is a assumed to be an IPv4 packet).
Signed-off-by: Tom Herbert <therbert@google.com>
This patch adds support for tokenized IIDs, that enable
administrators to assign well-known host-part addresses
to nodes whilst still obtaining global network prefix
from Router Advertisements. This is the iproute2 part for
the kernel patch f53adae4eae5 (``net: ipv6: add tokenized
interface identifier support'').
Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1
Getting a device token:
# ip token get dev eth1
token ::1a:2b:3c:4d dev eth1
Listing all tokens:
# ip token list (or: ip token)
token :: dev eth0
token ::1a:2b:3c:4d dev eth1
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Added support to ipoib rtnl ops through which one can create, configure,
query and delete IPoIB devices, for example
$ ip link add link ib0.8001 name ib0.8001 type ipoib pkey 0x8001
$ ip link add link ib0.1 name ib0.1 type ipoib mode connected
$ ip --details link show dev ib0.1
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
ip tcp_metrics/tcpmetrics
We support get/del for single entry and dump for
show/flush.
v3:
- fix rtt/rttvar shifts as suggested by Eric Dumazet
- show rtt/rttvar usecs as suggested by David Laight
Signed-off-by: Julian Anastasov <ja@ssi.bg>
LIBNETLINK will be defined in the main Makefile, so
both ../lib/libnetlink.a ../lib/libutil.a will be
automatically appended during linking. Otherwise
../lib/libnetlink.a ../lib/libutil.a will appear
twice during linking.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
If libc has setns present use that version instead of
rolling the syscall wrapper by hand.
Dan McGee found the following compile error:
gcc -D_GNU_SOURCE -O2 -Wstrict-prototypes -Wall -I../include
-DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib/\" -c -o ipnetns.o ipnetns.c
ipnetns.c:31:12: error: static declaration of ‘setns’ follows non-static
declaration
/usr/include/bits/sched.h:93:12: note: previous declaration of ‘setns’
was here
make[1]: *** [ipnetns.o] Error 1
Reported-by: Dan McGee <dan@archlinux.org>
Tested-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The goal of this code change is to implement a mechanism such that it is
simple to work with a kernel that is using multiple network namespaces
at once.
This comes in handy for interacting with vpns where there may be rfc1918
address overlaps, and different policies default routes, name servers
and the like.
Configuration specific to a network namespace that would ordinarily be
stored under /etc/ is stored under /etc/netns/<name>. For example if
the dns server configuration is different for your vpn you would create
a file /etc/netns/myvpn/resolv.conf.
File descriptors that can be used to manipulate a network namespace can
be created by opening /var/run/netns/<NAME>.
This adds the following commands to iproute.
ip netns add NAME
ip netns delete NAME
ip netns monitor
ip netns list
ip netns exec NAME cmd ....
ip link set DEV netns NAME
ip netns exec exists to cater the vast majority of programs that only
know how to operate in a single network namespace. ip netns exec
changes the default network namespace, creates a new mount namespace,
remounts /sys and bind mounts netns specific configuration files to
their standard locations.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add support for 'mode' parameter when creating a macvtap device.
This allows a macvtap device to be created in bridge, private or
the default vepa modes.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
-------------------------------------------------------------------
Acked-by: Arnd Bergmann <arnd@arndb.de>
Macvlan can now optionally support forwarding between its
ports, if they are in "bridge" mode. This adds support
for this option to "ip link add", "ip link set" and "ip
-d link show".
The default mode in the kernel is now "vepa" mode, meaning
"virtual ethernet port aggregator". This mode is used
together with the "hairpin" mode of an ethernet bridge
that the parent of the macvlan device is connected to.
All frames still get sent out to the external interface,
but the adjacent bridge is able to send them back on
the same wire in hairpin mode, so the macvlan ports
are able to see each other, which the bridge can be
configured to monitor and control traffic between
all macvlan instances. Multicast traffic coming in
from the external interface is checked for the source
MAC address and only delivered to ports that have not
yet seen it.
In bridge mode, macvlan will send all multicast traffic
to other interfaces that are also in bridge mode but
not to those in vepa mode, which get them on the way
back from the hairpin.
The third supported mode is "private", which prevents
communication between macvlans even if the adjacent
bridge is in hairpin mode. This behavior is closer to
the original implementation of macvlan but stricly
maintains isolation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The iptables code supports a "no shared libs" mode where it can be used
without requiring dlfcn related functionality. This adds similar support
to iproute2 so that it can easily be used on systems like nommu Linux (but
obviously with a few limitations -- no dynamic plugins).
Rather than modify every location that uses dlfcn.h, I hooked the dlfcn.h
header with stub functions when shared library support is disabled. Then
symbol lookup is done via a local static lookup table (which is generated
automatically at build time) so that internal symbols can be found.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Making veth a shared library for ip caused build problems (not PIC)
and is unneeded.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
The usage is
# ip link add [name] type veth [peer <name>] [mac <mac>] [peer_mac <mac>]
This version doesn't include the fix for ip/iplink.c as Patrick
said that he had included it into his patches already.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
This is a resend of the iproute VLAN patch with the if_link.h changes
edited out since the headers are already synced.
[IPROUTE]: VLAN support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Add support for using netlink for link configuration. Kernel-support is
probed, when not available it falls back to using ioctls.
Signed-off-by: Patrick McHardy <kaber@trash.net>
The new command is called "veth" with the following syntax:
* ip veth add <dev1> <dev2>
creates interconnected pair of veth devices.
* ip veth del <dev>
destroys the pair of veth devices, where <dev> is either
<dev1> or <dev2> used to create the pair.
One question that is to be solved is whether or not to create
a hard-coded netlink family for veth driver. Without it the
family resolution code has to be moved to general place in ip
utility (by now it is copy-paste-ed from one file to another
till final decision).
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Fix ip6tunnel.c to be fit with current ip command style.
Unlike other modules currently iptunnel (and ip6tunnel) is not
designed as protocol-independent because of unarranged structure
between IPv4 and IPv6.
Usage: ip -f inet6 tunnel { add | change | del | show } [ NAME ]
[ remote ADDR local ADDR ] [ dev PHYS_DEV ]
[ encaplimit ELIM ]
[ hoplimit HLIM ] [ tc TC ] [ fl FL ]
[ dscp inherit ]
Where: NAME := STRING
ADDR := IPV6_ADDRESS
ELIM := { none | 0..255 }(default=4)
HLIM := 0..255 (default=64)
TC := { 0x0..0xff | inherit }
FL := { 0x0..0xfffff | inherit }
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Split common functions like ioctl to export them.
This is a preparation to support to configure IPv6-over-IPv6 tunnel.
This patch also includes minor improvemen:
o to stop to include unused headers
o to change function static if it is not needed to be exported
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
John W. Linville
Nicolas Dichtel
Vadim Kochan
Mahesh Bandewar
Tom Herbert
Jiri Pirko
Steffen Klassert
Arvid Brodin
xeb@mail.ru
Daniel Borkmann
Or Gerlitz
Julian Anastasov
Stephen Hemminger
Saurabh
Yegor Yefremov
Eric W. Biederman
Sridhar Samudrala
Stephen Hemminger
Arnd Bergmann
Mike Frysinger
David Woodhouse
Wolfgang Grandegger
Herbert Xu
YOSHIFUJI Hideaki / 吉藤英明
Vitaliy Gusev
Stephen Hemminger
Pavel Emelianov
Patrick McHardy
Pavel Emelianov
Masahide NAKAMURA
shemminger
linux-ipv6.org!nakam
osdl.net!shemminger
net[shemminger]!shemminger
osdl.org!shemminger