Add an initial manpage for tc-etf covering all config options, basic
concepts and operation modes.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow setting tunnel options using the act_tunnel_key action.
Options are expressed as class:type:data and multiple options
may be listed using a comma delimiter.
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
geneve_opts 0102:80:00800022,0102:80:00800022 \
action mirred egress redirect dev geneve0
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for configuration parameters set and show.
Each parameter can be either generic or driver-specific.
The user can retrieve data on these configuration parameters by devlink
param show command and can set new value to a configuration parameter
by devlink param set command.
The configuration parameters can be set in different configuration
modes:
runtime - set while driver is running, no reset required.
driverinit - applied while driver initializes, requires restart
driver by devlink reload command.
permanent - written to device's non-volatile memory, hard reset
required to apply.
New commands added:
devlink dev param show [DEV name PARAMETER]
devlink dev param set DEV name PARAMETER value VALUE
cmode { permanent | driverinit | runtime }
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new isolated port option which, if set,
would allow the isolated ports to communicate only with non-isolated
ports and the bridge device. The option can be set via the bridge or ip
link type bridge_slave commands, e.g.:
$ ip link set dev eth0 type bridge_slave isolated on
$ bridge link set dev eth0 isolated on
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for OUTPUT_MARK in xfrm state to exercise the
functionality added by kernel commit 077fbac405bf
("net: xfrm: support setting an output mark.").
Sample output-
(with mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with output-mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(no mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
v1->v2: Moved the XFRMA_OUTPUT_MARK print after XFRMA_MARK in
xfrm_xfrma_print() as mentioned by Lorenzo
v2->v3: Fix one help formatting error as mentioned by Lorenzo.
Keep mark and output-mark on the same line and add man page info as
mentioned by David.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds basic support for Qualcomm rmnet devices.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Update the man pages for the resource attributes as well
as the driver-specific attributes.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently there is no way to log offloading errors if the rule is not
explicitly marked as skip_sw, making it hard for other applications such
as Open vSwitch to log why a given could not be offloaded.
This patch adds support for signaling the kernel that more verbose
logging is wanted, which now will include such messages.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
As the kernel code says, limit is actually the amount of packets it can
hold queued at a time, as per:
static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
...
if (unlikely(sch->q.qlen >= sch->limit))
return qdisc_drop_all(skb, sch, to_free);
So lets fix the description of the field in the man page.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Users have reported a regression due to ip now dropping capabilities
unconditionally.
zerotier-one VPN and VirtualBox use ambient capabilities in their
binary and then fork out to ip to set routes and links, and this
does not work anymore.
As a workaround, do not drop caps if CAP_NET_ADMIN (the most common
capability used by ip) is set with the INHERITABLE flag.
Users that want ip vrf exec to work do not need to set INHERITABLE,
which will then only set when the calling program had privileges to
give itself the ambient capability.
Fixes: ba2fc55b99 ("Drop capabilities if not running ip exec vrf with libcap")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Currently, iproute allows setting those flags, but it's impossible to
clear them, since their current value is fetched from the kernel and
then we OR in the additional flags passed on the command line.
Add no* variants to allow clearing them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
GRE tunnels are currently only documented together with IPIP and SIT
tunnels, but they actually have very different configuration
options. Let's separate them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ignore options "peer-offset" and "offset" when creating sessions. Keep
them when dumping sessions in order to avoid breaking external scripts.
"peer-offset" has always been a noop in iproute2. "offset" is now
ignored in Linux 4.16 (and was broken before that).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add initial support for oneline mode in tc; actions, filters and qdiscs
will be gradually updated in the follow-up patches.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The original problem was that a simple call to 'ss' leads to loading of
sctp_diag kernel module which might not be desired. While searching for
a workaround, it became clear how inconvenient it is to exclude a single
socket table from being queried.
This patch allows to prefix an item passed to '-A' parameter with an
exclamation mark to inverse its meaning.
Signed-off-by: Phil Sutter <phil@nwl.cc>
ip vrf exec requires root or CAP_NET_ADMIN, CAP_SYS_ADMIN and
CAP_DAC_OVERRIDE. It is not possible to run unprivileged commands like
ping as non-root or non-cap-enabled due to this requirement.
To allow users and administrators to safely add the required
capabilities to the binary, drop all capabilities on start if not
invoked with "vrf exec".
Update the manpage with the requirements.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This has to be a second match statement to the same u32 filter, not a
second one (which tc-filter doesn't support at all).
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
NTF_EXT_LEARNED can be set by a user on bridge fdb entry.
Provide a bridge command option to allow a user to set
NTF_EXT_LEARNED on a bridge fdb entry.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add missing documentation of the memory_limit fq_codel parameter and the
ce_threshold codel and fq_codel parameters.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
add support to match on ip_proto, sport and dport ranges.
For ip_proto, this patch currently enumerates, tcp, udp and sctp.
This list can be extended in the future.
example:
$ip rule add sport 666-777 dport 999 ip_proto tcp table 100
$ip rule show
0: from all lookup local
32765: from all ip_proto 6 sport 666-777 dport 999 lookup 100
32766: from all lookup main
32767: from all lookup default
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Modify 'ip rule' command to notice when the kernel passes
to us the originating protocol.
Add code to allow the `ip rule flush protocol XXX`
command to be accepted and properly handled.
Modify the documentation to reflect these code changes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The commit calls a new tc ematch for using netfilter xtable matches.
This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.
Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).
The matcher uses libxtables for parsing the input parameters.
Example use for matching an IPSec state with reqid 1:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
basic match 'ipt(-m policy --dir in --pol ipsec --reqid 1)' \
action drop
This is the user-space counter part of kernel commit ccc007e4a746
("net: sched: add em_ipt ematch for calling xtables matches")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For IP-in-IP tunnels, one can specify the [no]allow-localremote command
when configuring a device. Under the hood, this flips the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
tunnels, and thus there's no way to configure the flag on these
netdevices. Therefore introduce the command to link_gre6 as well.
The original support was introduced in commit 21440d19d9
("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement an option (-b) to execute RDMAtool commands
from supplied file. This follows the same model as
in use for ip and devlink tools, by expecting
every new command to be on new line.
These commands are expected to be without any -*
(e.g. -d, -j, e.t.c) global flags, which should be
called externally.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement the -color option; in this case -co is ambiguous
since it was already used for -conf.
For now this just means putting device name in color.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Document color option, and no longer have restriction on json
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make bridge work like other iproute2 commands and accept
same json and pretty flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add description for -json and -pretty options.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
If the kernel receives a negative nsid it will automatically assign
the next available nsid. In this case alloc_netid() will set min and
max to 0 for ird_alloc(). And when max == 0 idr_alloc() will interpret
this as the maximum range, i.e. specific to nsids it will try to find
an id in the range [0,INT_MAX). This is intentionally supported in the
kernel for nsids.
Commit acbe9118ce ("ip netns: use strtol() instead of atoi()")
regressed ip netns in that respect although previously the use-case
was either accidentally supported or opaquely supported such that it
triggered the original commit. From what I can gather it went as
follows before: atoi() was called with a string indicating a negative
value which caused it to return -1 which was passed to the
kernel. Let's make it less opaque by introducing the keyword "auto":
ip netns set <netns-name> auto
will cause nsid to be set to -1 and the kernel will select an available
nsid.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Spartan version of resource tracking documentation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
During qdisc creation it is possible to specify shared block for bot
ingress and egress. Pass this values to kernel according to the command
line options.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
So far, qdisc was the only handle that could be used to manipulate
filters. Kernel added support for using block to manipulate it. So add
the support to use block index to manipulate filters. The magic
TCM_IFINDEX_MAGIC_BLOCK indicates the block index is in use.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Jianbo Liu
Jesus Sanchez-Palencia
Simon Horman
Moshe Shemesh
Nikolay Aleksandrov
David Ahern
Subash Abhinov Kasiviswanathan
Daniele Palmas
Hoang Le
Roopa Prabhu
Steve Wise
Marcelo Ricardo Leitner
Luca Boccassi
Sabrina Dubroca
Guillaume Nault
Jiri Pirko
Roman Mashak
Stephen Hemminger
Phil Sutter
Toke Høiland-Jørgensen
Pieter Jansen van Vuuren
Donald Sharp
Eyal Birger
Petr Machata
Arkadi Sharshevsky
Leon Romanovsky
Stephen Hemminger
Christian Brauner