Kernel now supports attaching XDP programs in the driver
and hardware at the same time. Print that information
correctly.
In case there are multiple programs attached kernel will
not provide IFLA_XDP_PROG_ID, so don't expect it to be
there (this also improves the printing for very old kernels
slightly, as it avoids unnecessary "prog/xdp" line).
In short mode preserve the current outputs but don't print
IDs if there are multiple.
6: netdevsim0: <BROADCAST,NOARP> mtu 1500 xdpoffload/id:11 qdisc [...]
and:
6: netdevsim0: <BROADCAST,NOARP> mtu 1500 xdpmulti qdisc [...]
ip link output will keep using prog/xdp prefix if only one program
is attached, but can also print multiple program lines:
prog/xdp id 8 tag fc7a51d1a693a99e jited
vs:
prog/xdpdrv id 8 tag fc7a51d1a693a99e jited
prog/xdpoffload id 9 tag fc7a51d1a693a99e
JSON output gains a new array called "attached" which will
contain the full list of attached programs along with their
attachment modes:
"xdp": {
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
},
"attached": [ {
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
}
} ]
},
In case there are multiple programs attached the general "xdp"
section will not contain program information:
"xdp": {
"mode": 4,
"attached": [ {
"mode": 1,
"prog": {
"id": 10,
"tag": "fc7a51d1a693a99e",
"jited": 1
}
},{
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
}
} ]
},
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new isolated port option which, if set,
would allow the isolated ports to communicate only with non-isolated
ports and the bridge device. The option can be set via the bridge or ip
link type bridge_slave commands, e.g.:
$ ip link set dev eth0 type bridge_slave isolated on
$ bridge link set dev eth0 isolated on
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for OUTPUT_MARK in xfrm state to exercise the
functionality added by kernel commit 077fbac405bf
("net: xfrm: support setting an output mark.").
Sample output-
(with mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with output-mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(no mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
v1->v2: Moved the XFRMA_OUTPUT_MARK print after XFRMA_MARK in
xfrm_xfrma_print() as mentioned by Lorenzo
v2->v3: Fix one help formatting error as mentioned by Lorenzo.
Keep mark and output-mark on the same line and add man page info as
mentioned by David.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds basic support for Qualcomm rmnet devices.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As mentioned in the ip-address man page, an address label must
be equal to the device name or prefixed by the device name
followed by a colon. Currently the only check on this input is
to see if the device name appears at the beginning of the label
string.
This commit adds an additional check to ensure label == dev or
continues with a colon.
Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The 'link-netnsid' argument needs a number. Add 'link-netns' when the user
wants to use the iproute2 netns name instead of the nsid.
Example:
ip link add ipip1 link-netns foo type ipip remote 10.16.0.121 local 10.16.0.249
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When iproute2 has a name for the nsid, let's display it. It's more
user friendly than a number.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Parse and display those attributes.
Example:
ip l a type dummy
ip netns add foo
ip monitor link&
ip l s dummy1 netns foo
Deleted 6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 66:af:3a:3f:a0:89 brd ff:ff:ff:ff:ff:ff new-nsid 0 new-ifindex 6
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, calling 'ip xfrm monitor all' will
actually invoke the 'all-nsid' command because the
soft-match for 'all-nsid' occurs before the precise
match for 'all'. This patch rearranges the checks
so that the 'all' command, itself an alias for
invoking 'ip xfrm monitor' with no argument, can
be called consistent with the syntax for other ip
commands that accept an 'all'.
Signed-off-by: Nathan Harold <nharold@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A recent commit changed rtnl_talk_* to return the response message in
allocated memory so callers need to free it. The change to name_is_vrf
did not save the device index which is pointing to a struct inside the
now allocated and freed memory resulting in garbage getting returned
in some cases.
Fix by using a stack variable to save the return value and only set
it to ifi->ifi_index after all checks are done and before the answer
buffer is freed.
Fixes: 86bf43c7c2 ("lib/libnetlink: update rtnl_talk to support malloc buff at run time")
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
RTA_CACHEINFO can be sent for non-cloned routes. If the attribute is
present print it. Allows route dumps to print expires times for example
which can exist on FIB entries.
Signed-off-by: David Ahern <dsahern@gmail.com>
The ip command would always lookup the network device index
even when not necessary. This slows down operations like creating
lots of VLAN's.
David reported the original issue, this is an alternative patch
that solves it in a slightly more general method.
Using iproute2 to create a bridge and add 4094 vlans to it can take from
2 to 3 *minutes*. The reason is the extraneous call to ll_name_to_index.
ll_name_to_index results in an ioctl(SIOCGIFINDEX) call which in turn
invokes dev_load. If the index does not exist, which it won't when
creating a new link, dev_load calls modprobe twice -- once for
netdev-NAME and again for NAME. This is unnecessary overhead for each
link create.
When ip link is invoked for a new device, there is no reason to
call ll_name_to_index for the new device. With this patch, creating
a bridge and adding 4094 vlans takes less than 3 *seconds*.
old:
# time ip -batch ip-vlan.batch
real 3m13.727s
user 0m0.076s
sys 0m1.959s
new:
# time ip -batch ip-vlan.batch
real 0m3.222s
user 0m0.044s
sys 0m1.777s
Reported-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rta_expires is a signed int; print it as one.
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Continue parsing a multipath payload as long as another nexthop can fit
in the payload.
# ip route add 192.0.2.0/24 nexthop dev dummy0 nexthop dev dummy1
Before:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
After:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
nexthop dev dummy1 weight 1
Fixes: f48e14880a ("iproute: refactor multipath print")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, iproute allows setting those flags, but it's impossible to
clear them, since their current value is fetched from the kernel and
then we OR in the additional flags passed on the command line.
Add no* variants to allow clearing them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 6c4b672738 ("iplink_geneve: Get rid of inet_get_addr()")
inadvertently changed the parameter to addattr_l() resulting in:
addattr_l ERROR: message exceeded bound of 4
when remote is specified.
Fixes: 6c4b672738 ("iplink_geneve: Get rid of inet_get_addr()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Like kernel net-next commit 72f6d71e491e6 ("vxlan: add ttl inherit support"),
vxlan ttl inherit should means inherit the inner protocol's ttl value.
But currently when we add vxlan with "ttl inherit", we only set ttl 0,
which is actually use whatever default value instead of inherit the inner
protocol's ttl value.
To make a difference with ttl inherit and ttl == 0, we add an attribute
IFLA_VXLAN_TTL_INHERIT when "ttl inherit" specified. And use "ttl auto"
to means "use whatever default value", the same behavior with ttl == 0.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Attempt to add a multipath route where a nexthop definition refers to a
non-existent device causes 'ip' to crash and burn due to stack buffer
overflow:
# ip -6 route add fd00::1/64 nexthop dev fake1
Cannot find device "fake1"
Cannot find device "fake1"
Cannot find device "fake1"
...
Segmentation fault (core dumped)
Don't ignore errors from the helper routine that parses the nexthop
definition, and abort immediately if parsing fails.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
The offset and peer_offset parameters are only printed to avoid
confusing external scripts that may parse "ip l2tp show session"
output. There's no reason to keep them in JSON.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Ignore options "peer-offset" and "offset" when creating sessions. Keep
them when dumping sessions in order to avoid breaking external scripts.
"peer-offset" has always been a noop in iproute2. "offset" is now
ignored in Linux 4.16 (and was broken before that).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A problem was reported with parsing of prefixes all/any/default.
Commit 7696f1097f fixes the problem,
but there were also other pathces applied:
00b31a6b2e, which were intended to
fix the same problem. And they became redundant now. This patch
reverts changes introduced by those redundant patches.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Fixes warnings about strncpy size by using strlcpy.
tunnel.c: In function ‘tnl_gen_ioctl’:
tunnel.c:145:2: warning: ‘strncpy’ specified bound
16 equals destination size [-Wstringop-truncation]
strncpy(ifr.ifr_name, name, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Convert ip l2tp to use JSON output routines.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
ip vrf exec requires root or CAP_NET_ADMIN, CAP_SYS_ADMIN and
CAP_DAC_OVERRIDE. It is not possible to run unprivileged commands like
ping as non-root or non-cap-enabled due to this requirement.
To allow users and administrators to safely add the required
capabilities to the binary, drop all capabilities on start if not
invoked with "vrf exec".
Update the manpage with the requirements.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
This reverts commit 9135c4d603.
Debian maintainer found that basic command:
# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If kernel does not support the IP multicast address family,
then it will report all routes (PF_UNSPEC).
Give the user a better error message and abort the command.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Should be no change for non-json case except putting color
on address if desired.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Support printing mulitcast addresses in json and color mode.
Output format is unchanged for normal use.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
To benefit other users (e.g. link_veth.c) of iplink_parse() from
additional attribute checks and setups made in iplink_modify(). This
catches most of weired cobination of parameters to peer device
configuration.
Drop @name, @dev, @link, @group and @index from iplink_parse() parameters
list: they are not needed outside.
While there change return -1 to exit(-1) for group parsing errors: we
want to stop further command processing unless -force option is given
to get error line easily.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both ip-link(8) and error message when "index" parameter is given for
set/delete case says that index can only be given during network
device creation.
Follow this documented behaviour and get rid of ambiguous behaviour in
case of both "dev" and "index" specified for ip link delete scenario
(actually "index" being ignored in favor to "dev").
Prohibit "index" when configuring/deleting group of network devices.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both of them accept network device name as argument, but have different
meaning:
dev - is a device by it's name,
name - name for specific device.
The only case where they treated separately is network device rename
case where need to specify both ifindex and new name. In rest of the
cases we can assume that dev == name.
With this change we do following:
1) Kill ambiguity with both "dev" and "name" parameters given the same
name:
ip link {add|set} dev veth100a name veth100a ...
2) Make sure we do not accept "name" more than once.
3) For VF and XDP treat "name" as "dev". Fail in case of "dev" is
given after VF and/or XDP parsing.
4) Make veth and vxcan to accept both "name" and "dev" as their peer
parameters, effectively following general ip-link(8) utility
behaviour on link create:
ip link add {name|dev} veth1a type veth peer {name|dev} veth1b
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
TX rate limit fields are unsigned (__u32).
Use %u and print_uint when printing.
Tested:
$ ip link set ens1 vf 1 rate 2294967296
$ ip link show |grep -iE "vf 1" | grep rate
before:
vf 1 MAC 00:00:00:00:00:00, tx rate -2000000000 (Mbps), max_tx_rate -2000000000Mbps, ...
after:
vf 1 MAC 00:00:00:00:00:00, tx rate 2294967296 (Mbps), max_tx_rate 2294967296Mbps, ...
Fixes: 3fd8663087 ("iproute2: rework SR-IOV VF support")
Fixes: 8c29ae7cc2 ("ip link: Fix crash on older kernels when show VF dev")
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Fixes: ae7229d5f9 ("ip: Add support for setting and showing SR-IOV virtual funtion link params")
Fixes: d0e720111a ("ip: ipaddress.c: add support for json output")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
add support to match on ip_proto, sport and dport ranges.
For ip_proto, this patch currently enumerates, tcp, udp and sctp.
This list can be extended in the future.
example:
$ip rule add sport 666-777 dport 999 ip_proto tcp table 100
$ip rule show
0: from all lookup local
32765: from all ip_proto 6 sport 666-777 dport 999 lookup 100
32766: from all lookup main
32767: from all lookup default
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Jakub Kicinski
Nikolay Aleksandrov
David Ahern
Subash Abhinov Kasiviswanathan
Daniele Palmas
Patrick Talbert
Stephen Hemminger
Nicolas Dichtel
Nathan Harold
Roopa Prabhu
Ido Schimmel
Toke Høiland-Jørgensen
Hangbin Liu
Sabrina Dubroca
Jakub Sitnicki
Guillaume Nault
Alexander Zubkov
Stephen Hemminger
Luca Boccassi
Serhey Popovych
Tariq Toukan