print_tunnel() functions in ip6tunnel.c and iptunnel.c contains
the same code to print out GRE key and flags
This commit factorize the code in a helper function in tunnel.c
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ability to tweak the delay between gratuitous ND/ARP packets has been
added in kernel commit 07a4ddec3ce9 ("bonding: add an option to
specify a delay between peer notifications"), through
IFLA_BOND_PEER_NOTIF_DELAY attribute. Add support to set and show this
value.
Example:
$ ip -d link set bond0 type bond peer_notify_delay 1000
$ ip -d link l dev bond0
2: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 50:54:33:00:00:01 brd ff:ff:ff:ff:ff:ff
bond mode active-backup active_slave eth0 miimon 100 updelay 0
downdelay 0 peer_notify_delay 1000 use_carrier 1 arp_interval 0
arp_validate none arp_all_targets any primary eth0
primary_reselect always fail_over_mac active xmit_hash_policy
layer2 resend_igmp 1 num_grat_arp 5 all_slaves_active 0 min_links
0 lp_interval 1 packets_per_slave 1 lacp_rate slow ad_select
stable tlb_dynamic_lb 1 addrgenmode eu
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Setting metrics for routes currently lead to non-parsable
json output. For example:
$ ip link add type dummy
$ ip route add 192.168.2.0 dev dummy0 metric 100 mtu 1000 rto_min 3
$ ip -j route | jq
parse error: ':' not as part of an object at line 1, column 319
Fixing this opening a json object in the metrics array and using
print_string() instead of fprintf().
This is the output for the above commands applying this patch:
$ ip -j route | jq
[
{
"dst": "192.168.2.0",
"dev": "dummy0",
"scope": "link",
"metric": 100,
"flags": [],
"metrics": [
{
"mtu": 1000,
"rto_min": 3
}
]
}
]
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Fixes: 968272e791 ("iproute: refactor metrics print")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Current code assumes that we print ethernet mac and
that doesn't work in the IPoIB case with SRIOV-enabled hardware
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 14:80:00:00:66:fe, spoof checking off, link-state
disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: updated kernel headers to uapi commit
v2->v3: fixed alignment
v3->v4: aligned print statements as used through the source
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
[ committer note: flipped argument order for print_vfinfo to keep fp first
and fixed alignment issues ]
'mngtmpaddr' option make the kernel manage temporary addresses
created from the specified one as template on behalf of Privacy
Extensions (RFC3041). This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set mngtmpaddr on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 mngtmpaddr
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global mngtmpaddr dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_MANAGETEMPADDR flag.
Fixes: 5b7e21c417 ("add support for IFA_F_MANAGETEMPADDR")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'home' option designates a IPv6 address as "home address" as
defined in RFC 6275. This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set home on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 home
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global home dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_HOMEADDRESS flag.
Fixes: bac735c53a ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Duplicate Address Detection (RFC 4862) is available only for IPv6
addresses. As a consequence, 'nodad' option, turning it off, should
be available only for IPv6, and is defined like that in the man page.
However it is possible to set nodad on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 nodad
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global nodad dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_NODAD flag.
Fixes: bac735c53a ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With a current (5.1) kernel version, IPv6 exception routes can't be listed
(ip -6 route list cache) or flushed (ip -6 route flush cache). Kernel
support for this is being added back. Relevant net-next commits:
564c91f7e563 fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED
ef11209d4219 Revert "net/ipv6: Bail early if user only wants cloned entries"
3401bfb1638e ipv6/route: Don't match on fc_nh_id if not set in ip6_route_del()
bf9a8a061ddc ipv6/route: Change return code of rt6_dump_route() for partial node dumps
1e47b4837f3b ipv6: Dump route exceptions if requested
40cb35d5dc04 ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1()
However, to allow the kernel to filter routes based on the RTM_F_CLONED
flag, we need to make sure this flag is always passed when we want cached
routes to be dumped, and we can also pass table and output interface
attributes to have the kernel filtering on them, if requested by the user.
Use the existing iproute_dump_filter() as a filter for the dump request in
iproute_flush(). This way, 'ip -6 route flush cache' works again.
v2: Instead of creating a separate 'filter' function dealing with
RTM_F_CACHED only, use the existing iproute_dump_filter() and get
table and oif kernel filtering for free. Suggested by David Ahern.
Fixes: aba5acdfdb ("(Logical change 1.3)")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When we disable IPv6 from the start up (ipv6.disable=1), there will be
no IPv6 route info in the dump message. If we return -1 when
ifi->ifi_family != AF_INET6, we will get error like
$ ip token list
Dump terminated
which will make user feel confused. There is no need to return -1 if the
dump message not match. Return 0 is enough.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Only interface from group 0 were displayed.
ip monitor calls ipaddr_reset_filter() and there is no reason to not reset
the filter group in this function.
Fixes: c4fdf75d3d ("ip link: fix display of interface groups")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The netns_{save,restore} functions are only used in ipnetns.c now, since
the restore is not needed anymore after the netns exec command.
Move them in ipnetns.c, and make them static.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
On vrf exec, reset the VRF associations in the child process, via the
new hook added to cmd_exec(). In this way, the parent doesn't have to
reset the VRF associations before spawning other processes.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'ip netns exec' changes the current netns just before executing a child
process, and restores it after forking. This is needed if we're running
in batch or do_all mode.
Some cleanups must be done both in the parent and in the child: the
parent must restore the previous netns, while the child must reset any
VRF association.
Unfortunately, if do_all is set, the VRF are not reset in the child, and
the spawned processes are started with the wrong VRF context. This can
be triggered with this script:
# ip -b - <<-'EOF'
link add type vrf table 100
link set vrf0 up
link add type dummy
link set dummy0 vrf vrf0 up
netns add ns1
EOF
# ip -all -b - <<-'EOF'
vrf exec vrf0 true
netns exec setsid -f sleep 1h
EOF
# ip vrf pids vrf0
314 sleep
# ps 314
PID TTY STAT TIME COMMAND
314 ? Ss 0:00 sleep 1h
Refactor cmd_exec() and pass to it a function pointer which is called in
the child before the final exec. In the netns exec case the function just
resets the VRF and switches netns.
Doing it in the child is less error prone and safer, because the parent
environment is always kept unaltered.
After this refactor some utility functions became unused, so remove them.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This variable has the same name as `struct xfrm_filter filter` in
ip/ipxfrm.c, but overrides that definition since `struct rtfilter`
is larger.
This is visible when built with -Wl,--warn-common in LDFLAGS:
/usr/bin/ld: ipxfrm.o: warning: common of `filter' overridden by larger common from ipmroute.o
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add capability to ip-monitor to listen and dump nexthop messages.
Since the nexthop group = 32 which exceeds the max groups bit
field, 2 separate flags are needed - one that defaults on to indicate
nexthop group is joined by default and a second that indicates a
specific selection by the user (e.g, ip mon nexthop route).
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add nhid option for routes to use nexthop objects by id.
Example:
$ ip nexthop add id 1 via 10.99.1.2 dev veth1
$ ip route add 10.100.1.0/24 nhid 1
$ ip route ls
...
10.100.1.0/24 nhid 1 via 10.99.1.2 dev veth1
Signed-off-by: David Ahern <dsahern@gmail.com>
Add nexthop subcommand to ip. Implement basic commands for creating,
deleting and dumping nexthop objects. Syntax follows 'nexthop' syntax
from existing 'ip route' command.
Examples:
1. Single path
$ ip nexthop add id 1 via 10.99.1.2 dev veth1
$ ip nexthop ls
id 1 via 10.99.1.2 src 10.99.1.1 dev veth1 scope link
2. ECMP
$ ip nexthop add id 2 via 10.99.3.2 dev veth3
$ ip nexthop add id 1001 group 1/2
--> creates a nexthop group with 2 component nexthops:
id 1 and id 2 both the same weight
$ ip nexthop ls
id 1 via 10.99.1.2 src 10.99.1.1 dev veth1 scope link
id 2 via 10.99.3.2 src 10.99.3.1 dev veth3 scope link
id 1001 group 1/2
3. Weighted multipath
$ ip nexthop add id 1002 group 1,10/2,20
--> creates a nexthop group with 2 component nexthops:
id 1 with a weight of 10 and id 2 with a weight of 20
$ ip nexthop ls
id 1 via 10.99.1.2 src 10.99.1.1 dev veth1 scope link
id 2 via 10.99.3.2 src 10.99.3.1 dev veth3 scope link
id 1001 group 1/2
id 1002 group 1,10/2,20
Signed-off-by: David Ahern <dsahern@gmail.com>
Export print_rt_flags and print_rta_if for use by the nexthop
command.
Change print_rta_gateway to take the family versus rtmsg struct and
export for use by the nexthop command.
Signed-off-by: David Ahern <dsahern@gmail.com>
lwt_parse_encap currently assumes the encap attribute is RTA_ENCAP
and the type is RTA_ENCAP_TYPE. Change lwt_parse_encap to take these
as input arguments for reuse by nexthop code which has the attributes
as NHA_ENCAP and NHA_ENCAP_TYPE.
Signed-off-by: David Ahern <dsahern@gmail.com>
Inclusion of 'dev' is allowed by the syntax but not handled
correctly by the command. It produces no output for show
command and falsely successful for change command but does
not make any changes.
can be verified with the following steps
# ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none
# ip -6 tunnel show ip6tnl1
<correct output>
# ip -6 tunnel show dev ip6tnl1
<no output but correct output after this change>
# ip -6 tunnel change dev ip6tnl1 local 2001🔢:1 remote 2001🔢:2 encaplimit none ttl 127 tos inherit allow-localremote
# echo $?
0
# ip -6 tunnel show ip6tnl1
<no changes applied, but changes are correctly applied after this change>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When creating a new netns or executing a program into an existing one,
the unshare() or setns() calls will change the current netns.
In batch mode, this can run commands on the wrong interfaces, as the
ifindex value is meaningful only in the current netns. For example, this
command fails because veth-c doesn't exists in the init netns:
# ip -b - <<-'EOF'
netns add client
link add name veth-c type veth peer veth-s netns client
addr add 192.168.2.1/24 dev veth-c
EOF
Cannot find device "veth-c"
Command failed -:7
But if there are two devices with the same name in the init and new netns,
ip will build a wrong ll_map with indexes belonging to the new netns,
and will execute actions in the init netns using this wrong mapping.
This script will flush all eth0 addresses and bring it down, as it has
the same ifindex of veth0 in the new netns:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.76/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 3598sec preferred_lft 3598sec
# ip -b - <<-'EOF'
netns add client
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
3: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether c2:db:d0:34:13:4a brd ff:ff:ff:ff:ff:ff
4: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ca:9d:6b:5f:5f:8f brd ff:ff:ff:ff:ff:ff
5: veth-ns@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 32:ef:22:df:51:0a brd ff:ff:ff:ff:ff:ff link-netns client
The same issue can be triggered by the netns exec subcommand with a
sligthy different script:
# ip netns add client
# ip -b - <<-'EOF'
netns exec client true
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
Fix this by adding two netns_{save,reset} functions, which are used
to get a file descriptor for the init netns, and restore it after
each batch command.
netns_save() is called before the unshare() or setns(),
while netns_restore() is called after each command.
Fixes: 0dc34c7713 ("iproute2: Add processless network namespace support")
Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It will obviously fail. This is a follow up of the
commit 757837230a ("lib: suppress error msg when filling the cache").
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow to limit 'ip xfrm {state|policy} list' output to a certain address
family and to delete all states/policies by family.
Although preferred_family was already set in filters, the filter
function ignored it. To enable filtering despite the lack of other
selectors, filter.use has to be set if family is not AF_UNSPEC.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Follow the following steps:
# ip netns add net1
# export MALLOC_MMAP_THRESHOLD_=0
# ip netns list
then Segmentation fault (core dumped) will occur.
In get_netnsid_from_name func, answer is freed before
rta_getattr_u32(tb[NETNSA_NSID]), where tb[] refers to answer`s
content. If we set MALLOC_MMAP_THRESHOLD_=0, mmap will be adoped to
malloc memory, which will be freed immediately after calling free
func. So reading tb[NETNSA_NSID] will access the released memory
after free(answer).
Here, we will call get_netnsid_from_name(tb[NETNSA_NSID]) before free(answer).
Fixes: 86bf43c7c2 ("lib/libnetlink: update rtnl_talk to support malloc buff at run time")
Reported-by: Huiying Kou <kouhuiying@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Similar to other print functions we need to flush buffered data
in order to work with pipes and output redirects.
After this patch ip monitor mroute &>log works properly.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the VLAN bridge binding flag that is
provided in net-next kernel by the series merged by 1ab839281cf7
("net-support-binding-vlan-dev-link-state-to-vlan-member-bridge-ports")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
# rule add priority 10 realms 1/0xF
# rule add priority 10 realms 0/0xF
# ip rule
10: from all lookup main 15
10: from all lookup main realms 1/15
The previous behavior was there since the beginning.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When printing the actions, we avoid adding the trailing space after the
attribute. Possibly because we expect the action to be the last output
on the line and not end with a space.
But for FR_ACT_TO_TBL nothing is printed. That means, we add double
spaces if a protocol is printed as well:
# ip rule add priority 10 protocol 10 type 1
will be printed as
10: from all lookup 1 proto mrt
The only visible effect of the patch is to avoid the double-space and
avoid a trailing space if the action is FR_ACT_TO_TBL.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It seems print_rule() tries to avoid a trailing space at the end
of the line. At least, when printing details about the actions,
they no longer append the space. Probably expecting to be the
last attribute that will be printed.
Don't let the protocol add the trailing space. The space at the end
of the line should be printed consistently (or not).
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For all other actions we avoid the trailing space, so do it here
as well.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for binding FOU ports using iproute2.
Kernel-support was added in 1713cb37bf67 ("fou: Support binding FoU
socket").
The parse function now handles new arguments for setting the
binding-related attributes, while the print function writes the new
attributes if they are set. Also, the man page has been updated.
v2->v3:
* Remove redundant ll_init_map()-calls (thanks David Ahern).
v1->v2 (all changes suggested by David Ahern):
* Fix reverse Christmas tree ordering.
* Remove redundant peer_port_set-variable, it is enough to check
peer_port.
* Add proper error handling of invalid local/peer addresses.
* Use interface name and not index.
* Remove updating fou-header file, it is already done.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for manipulating and showing the vlan_stats_per_port bridge
option which can be toggled only when there are no port VLANs
configured. Also update the man page with the new option.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print the offload indication in case it is set on the neighbour.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The XFRMA_IF_ID attribute is set in policies/states for them to be
associated with an XFRM interface (4.19+).
Add support for setting / displaying this attribute.
Note that 0 is a valid value therefore set XFRMA_IF_ID if any value
was provided in command line.
Tested-by: Antony Antony <antony@phenome.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Interfaces take a 'if_id' which is an interface id which can be set on
an xfrm policy as its interface lookup key (XFRMA_IF_ID).
Signed-off-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This adds configuration for the IFLA_BRPORT_MCAST_TO_UCAST flag that
allows multicast packets to be replicated as unicast packets.
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi
David Ahern
Vincent Bernat
Denis Kirjanov
Stefano Brivio
Hangbin Liu
Nicolas Dichtel
Matteo Croce
Pete Morici
Michael Forney
Mahesh Bandewar
Stephen Hemminger
Phil Sutter
Zhiqiang Liu
Nikolay Aleksandrov
Mike Manning
Thomas Haller
Kristian Evensen
Ido Schimmel
Beniamino Galvani
Eyal Birger
Matt Ellison
Tobias Jungel