While at it, convert xfrm_xfrma_print and xfrm_encap_type_parse to use
the UAPI macros for encap_type as suggested by David Ahern, and add the
UAPI udp.h header (sync'd from ipsec-next to get the TCP_ENCAP_ESPINTCP
definition).
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
$ make CCOPTS=-fno-common
gcc ... -o ip
ld: rt_names.o (symbol from plugin): in function "rtnl_rtprot_n2a":
(.text+0x0): multiple definition of "numeric"; ip.o (symbol from plugin):(.text+0x0): first defined here
gcc ... -o tipc
ld: ../lib/libutil.a(utils.o):(.bss+0xc): multiple definition of `pretty';
tipc.o:tipc.c:28: first defined here
References: https://bugzilla.opensuse.org/1160244
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The kernel now signals the offload state of a route using the
'RTM_F_OFFLOAD' and 'RTM_F_TRAP' flags. Print these to help users
understand the offload state of each route. The "rt_" prefix is used in
order to distinguish it from the offload state of nexthops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The 802.3ad/LACP actor/partner operating states are only printed as
numbers, e.g,
ad_actor_oper_port_state 15
Add an additional output in ip link show that prints a string describing
the individual 3ad bit meanings in the following way:
ad_actor_oper_port_state_str <active,short_timeout,aggregating,in_sync>
JSON output is also supported, the field becomes a json array:
"ad_actor_oper_port_state_str":
["active","short_timeout","aggregating","in_sync"]
Signed-off-by: Andy Roulin <aroulin@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
if_id is u32, error on -ve values instead of setting to 0
after :
ip link add ipsec1 type xfrm dev lo if_id -10
Error: argument "-10" is wrong: if_id value is invalid
before : note xfrm if_id 0
ip link add ipsec1 type xfrm dev lo if_id -10
ip -d link show dev ipsec1
9: ipsec1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Fixes: 286446c1e8 ("ip: support for xfrm interfaces")
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for the BRIDGE_XSTATS_STP xstats, as follow:
# ip link xstats type bridge_slave dev lan4 stp
lan4
STP BPDU: RX: 0 TX: 61
STP TCN: RX: 0 TX: 0
STP Transitions: Blocked: 2 Forwarding: 1
Or below as JSON:
# ip -j -p link xstats type bridge_slave dev lan0 stp
[ {
"ifname": "lan0",
"stp": {
"rx_bpdu": 0,
"tx_bpdu": 500,
"rx_tcn": 0,
"tx_tcn": 0,
"transition_blk": 0,
"transition_fwd": 0
}
} ]
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Display permanent hardware address of an interface in output of
"ip link show" and "ip addr show". To reduce noise, permanent address is
only shown if it is different from current one.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David Ahern <dsahern@gmail.com>
it allows to specify also the table name in addition to the table number in
SRv6 End.DT* behaviors.
To add an End.DT6 behavior route specifying the table by name:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table main dev eth0
The ip route show to print output this route:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT6 table main dev eth0 metric 1024 pref medium
The JSON output:
$ ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6local",
"action": "End.DT6",
"table": "main",
"dev": "eth0",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ip tool oneline option should output each record on a single line. While
oneline option is active the variable _SL_ replaces line feeds with the
'\' character. However, at the end of print_linkinfo() the variable _SL_
shouldn't be used, otherwise the whole output is on a single line.
Before this fix:
$ip -o link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000\ link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00\2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc fq_codel state UP mode DEFAULT group default qlen 1000\
link/ether 52:54:00:60:0a:db brd ff:ff:ff:ff:ff:ff\3: eth1:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode
DEFAULT group default qlen 1000\ link/ether 00:50:56:1b:05:cd brd
ff:ff:ff:ff:ff:ff\
After this fix:
$ip -o link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000\ link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UP mode DEFAULT group default qlen 1000\ link/ether 52:54:00:60:0a:db
brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UP mode DEFAULT group default qlen 1000\ link/ether 00:50:56:1b:05:cd
brd ff:ff:ff:ff:ff:ff
Fixes: 3aa0e51be6 ("ip: add support for alternative name addition/deletion/list")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Extend iplink to show VF GUIDs (IFLA_VF_IB_NODE_GUID, IFLA_VF_IB_PORT_GUID),
giving the ability for user-space application to print GUID values.
This ability is added to the one of setting new node GUID and port GUID values.
Suitable ip link command:
- ip link show <device>
For example:
- ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33
- ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10
- ip link show ib4
ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since invarg() automatically adds a '\n' character, having one in the
error message generates an extra blank line.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Don't output the nsid and current-nsid json keys if they're not set.
Otherwise a parser would have to special case the "not-assigned"
string.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Negative values are invalid netns ids. Ensure that helper functions
don't accidentally try to process them.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
These attributes are signed (with -1 meaning NETNSA_NSID_NOT_ASSIGNED).
So let's use rta_getattr_s32() and print_int() instead of their
unsigned counterpart to avoid confusion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Extend ll_name_to_index() to get the index of a netdevice using
alternative interface name. Allow alternative long names to pass checks
in couple of ip link/addr commands.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When `-all' argument is specified netns runs cmd on all namespaces
and NAME is not used, but netns nevertheless checks if argv[1] is a
valid namespace name ignoring the fact that argv[1] contains cmd
and not NAME. This results in bug where user cannot specify
absolute path to command.
# ip -all netns exec /usr/bin/whoami
Invalid netns name "/usr/bin/whoami"
This forces user to have his command in PATH.
Solution is simply to not validate argv[1] when `-all' argument is
specified.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support to lookup a neigh entry
using recently added support in the kernel using RTM_GETNEIGH
example:
$ip neigh get 10.0.2.4 dev test-dummy0
10.0.2.4 dev test-dummy0 lladdr de:ad:be:ef:13:37 PERMANENT
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Since linux commit 22d6552f827e ("xfrm interface: fix management of
phydev"), phydev is not mandatory anymore.
Note that it also could be useful before the above commit to not force the
user to put a phydev (the kernel was checking it anyway).
For example, it was useful to not set it in case of x-netns, because the
phydev is not available in the current netns:
Before the patch:
$ ip netns add foo
$ ip link add xfrm1 type xfrm dev eth1 if_id 1
$ ip link set xfrm1 netns foo
$ ip -n foo link set xfrm1 type xfrm dev eth1 if_id 2
Cannot find device "eth1"
$ ip -n foo link set xfrm1 type xfrm if_id 2
must specify physical device
Fixes: 286446c1e8 ("ip: support for xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a space after 'blackhole' is missing to properly separate the
protocol when it is given.
Fixes: 63df8e8543 ("Add support for nexthop objects")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In the case where we have a large number of nexthops from a specific
protocol, allow the flush and list operations to take a protocol
to limit the commands scopes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When displaying a nexthop group made up of other nexthops, the display
line shows this when you have additional data at the end:
id 42 group 43/44/45/46/47/48/49/50/51/52/53/54/55/56/57/58/59/60/61/62/63/64/65/66/67/68/69/70/71/72/73/74proto zebra
Modify code so that it shows:
id 42 group 43/44/45/46/47/48/49/50/51/52/53/54/55/56/57/58/59/60/61/62/63/64/65/66/67/68/69/70/71/72/73/74 proto zebra
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add json support on iptunnel and ip6tunnel.
The plain text output format should remain the same.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The command
ip -details link show can0
prints in the last line the value of the clock frequency attached
to the name of the following value "numtxqueues", e.g.
clock 49500000numtxqueues 1 numrxqueues 1 gso_max_size
65536 gso_max_segs 65535
Add the missing space after the clock value.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
print_tunnel() functions in ip6tunnel.c and iptunnel.c contains
the same code to print out GRE key and flags
This commit factorize the code in a helper function in tunnel.c
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tunnel change fails if a tunnel name is not specified while using
'ip -6 tunnel change'. However, no warning message is printed and
no error code is returned.
$ ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none dev dummy0
$ ip -6 tunnel change dev dummy0 local 2001🔢:1 remote 2001🔢:2
$ ip -6 tunnel show ip6tnl1
ip6tnl1: gre/ipv6 remote fd::2 local fd::1 dev dummy0 encaplimit none hoplimit 127 tclass inherit flowlabel 0x00000 (flowinfo 0x00000000)
This commit checks if tunnel interface name is equal to an empty
string: in this case, it prints a warning message to the user.
It intentionally avoids to return an error to not break existing
script setup.
This is the output after this commit:
$ ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none dev dummy0
$ ip -6 tunnel change dev dummy0 local 2001🔢:1 remote 2001🔢:2
Tunnel interface name not specified
$ ip -6 tunnel show ip6tnl1
ip6tnl1: gre/ipv6 remote fd::2 local fd::1 dev dummy0 encaplimit none hoplimit 127 tclass inherit flowlabel 0x00000 (flowinfo 0x00000000)
Reviewed-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This reverts commit ba126dcad2.
It breaks tunnel creation when using 'dev' parameter:
$ ip link add type dummy
$ ip -6 tunnel add ip6tnl1 mode ip6ip6 remote 2001:db8:ffff💯:2 local 2001:db8:ffff💯:1 hoplimit 1 tclass 0x0 dev dummy0
add tunnel "ip6tnl0" failed: File exists
dev parameter must be used to specify the device to which
the tunnel is binded, and not the tunnel itself.
Reported-by: Jianwen Ji <jiji@redhat.com>
Reviewed-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Ability to tweak the delay between gratuitous ND/ARP packets has been
added in kernel commit 07a4ddec3ce9 ("bonding: add an option to
specify a delay between peer notifications"), through
IFLA_BOND_PEER_NOTIF_DELAY attribute. Add support to set and show this
value.
Example:
$ ip -d link set bond0 type bond peer_notify_delay 1000
$ ip -d link l dev bond0
2: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 50:54:33:00:00:01 brd ff:ff:ff:ff:ff:ff
bond mode active-backup active_slave eth0 miimon 100 updelay 0
downdelay 0 peer_notify_delay 1000 use_carrier 1 arp_interval 0
arp_validate none arp_all_targets any primary eth0
primary_reselect always fail_over_mac active xmit_hash_policy
layer2 resend_igmp 1 num_grat_arp 5 all_slaves_active 0 min_links
0 lp_interval 1 packets_per_slave 1 lacp_rate slow ad_select
stable tlb_dynamic_lb 1 addrgenmode eu
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Setting metrics for routes currently lead to non-parsable
json output. For example:
$ ip link add type dummy
$ ip route add 192.168.2.0 dev dummy0 metric 100 mtu 1000 rto_min 3
$ ip -j route | jq
parse error: ':' not as part of an object at line 1, column 319
Fixing this opening a json object in the metrics array and using
print_string() instead of fprintf().
This is the output for the above commands applying this patch:
$ ip -j route | jq
[
{
"dst": "192.168.2.0",
"dev": "dummy0",
"scope": "link",
"metric": 100,
"flags": [],
"metrics": [
{
"mtu": 1000,
"rto_min": 3
}
]
}
]
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Fixes: 968272e791 ("iproute: refactor metrics print")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Current code assumes that we print ethernet mac and
that doesn't work in the IPoIB case with SRIOV-enabled hardware
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 14:80:00:00:66:fe, spoof checking off, link-state
disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: updated kernel headers to uapi commit
v2->v3: fixed alignment
v3->v4: aligned print statements as used through the source
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
[ committer note: flipped argument order for print_vfinfo to keep fp first
and fixed alignment issues ]
'mngtmpaddr' option make the kernel manage temporary addresses
created from the specified one as template on behalf of Privacy
Extensions (RFC3041). This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set mngtmpaddr on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 mngtmpaddr
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global mngtmpaddr dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_MANAGETEMPADDR flag.
Fixes: 5b7e21c417 ("add support for IFA_F_MANAGETEMPADDR")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'home' option designates a IPv6 address as "home address" as
defined in RFC 6275. This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set home on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 home
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global home dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_HOMEADDRESS flag.
Fixes: bac735c53a ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Duplicate Address Detection (RFC 4862) is available only for IPv6
addresses. As a consequence, 'nodad' option, turning it off, should
be available only for IPv6, and is defined like that in the man page.
However it is possible to set nodad on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 nodad
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global nodad dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_NODAD flag.
Fixes: bac735c53a ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With a current (5.1) kernel version, IPv6 exception routes can't be listed
(ip -6 route list cache) or flushed (ip -6 route flush cache). Kernel
support for this is being added back. Relevant net-next commits:
564c91f7e563 fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED
ef11209d4219 Revert "net/ipv6: Bail early if user only wants cloned entries"
3401bfb1638e ipv6/route: Don't match on fc_nh_id if not set in ip6_route_del()
bf9a8a061ddc ipv6/route: Change return code of rt6_dump_route() for partial node dumps
1e47b4837f3b ipv6: Dump route exceptions if requested
40cb35d5dc04 ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1()
However, to allow the kernel to filter routes based on the RTM_F_CLONED
flag, we need to make sure this flag is always passed when we want cached
routes to be dumped, and we can also pass table and output interface
attributes to have the kernel filtering on them, if requested by the user.
Use the existing iproute_dump_filter() as a filter for the dump request in
iproute_flush(). This way, 'ip -6 route flush cache' works again.
v2: Instead of creating a separate 'filter' function dealing with
RTM_F_CACHED only, use the existing iproute_dump_filter() and get
table and oif kernel filtering for free. Suggested by David Ahern.
Fixes: aba5acdfdb ("(Logical change 1.3)")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stephen Hemminger
Sabrina Dubroca
Jan Engelhardt
Vladis Dronov
Ido Schimmel
David Ahern
Andy Roulin
Antony Antony
Vivien Didelot
Michal Kubecek
Paolo Lungaroni
Moshe Shemesh
Danit Goldberg
Guillaume Nault
Julien Fortin
Jiri Pirko
Michał Łyszczek
Nicolas Dichtel
Roopa Prabhu
Donald Sharp
Andrea Claudi
Antonio Borneo
Vincent Bernat
Denis Kirjanov
Stefano Brivio