Drop unnecessary curly braces around single action keywords, point out
that 'dev' parameter to 'ip token get' is optional and clarify that 'ip
token' defaults to 'list' action.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Clarify that 'ip rule' defaults to action 'list', that 'flush' and
'save' actions don't accept additional parameters, add missing 'not' and
'goto' keywords and finally fix fonts used in 'fwmark' and 'realms'
parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The first line contained a c'n'p error, incorrectly listing 'ip address'
syntax. Since PARAMS is used just once and there are not many other
parameters to 'ip ntable change', state them inline and in addition to
that clarify the possibility to pass multiple parameters at once.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Use brackets to show that 'ip netns' defaults to action 'list', drop
superfluous curly braces around 'set' action keyword.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reflect that it is possible to pass multiple parameters at the same
time, also use the same trick the help text uses to emphasize vf
specific parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Clarify that the optional '-' prefix of the 'tentative', 'deprecated'
and 'dadfailed' keywords has to be put right in front of them, no
whitespace is allowed in between.
In addition to that, clarify that it is valid to pass both 'valid_lft'
and 'preferred_lft' at the same time to 'ip address'.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a bit pedantic, but brackets ([]) show optional values and since
TYPE must not become empty, they're not suited to surround the type
keyword choices. Use curly braces instead.
Also add some missing whitespace to the parameter list above.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Neither 'list' nor 'flush' actions accept parameters, and with given
prefix the action keyword is not optional anymore.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Although the ip command accepts both "neighbor" and "neighbour" as
subcommand, I assume it's sufficient to list it in help text as just
"neigh" like ip.8 does.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Recently support was added to the kernel to be able to add more per-mdb
entry attributes via standard netlink attributes of type MDBA_MDB_EATTR_.
This patch adds support to iproute2 to parse and output these
attributes. The first exported attribute is the mdb "timer" value which
is shown only when the "-s" iproute2 arg is used.
Example:
$ bridge -s mdb show
dev br0 port eth1 grp 239.0.0.11 permanent 0.00
dev br0 port eth1 grp 239.0.0.10 temp 244.15
dev br0 port eth1 grp 239.0.0.1 temp 245.21
dev br0 port eth1 grp 239.0.0.5 temp 246.43
dev br0 port eth2 grp 239.0.0.5 temp 248.44
dev br0 port eth1 grp 239.0.0.2 temp 245.32
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The help text was misleading: One could think it is possible to list
rules by selector, which would be nice but isn't. This change also
clarifies that 'ip rule' defaults to 'list' if no further arguments are
given.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.
To trust VF.
# ip link set dev eth0 vf 1 trust on
To untrust VF.
# ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
This patch is a follow up to the recently added
'static' fdb option.
It introduces a new option 'dynamic' which adds
dynamic fdb entries with NUD_REACHABLE.
$bridge fdb add 00:01:02:03:04:06 dev eth0 master dynamic
$bridge fdb show
00:01:02:03:04:06 dev eth0
This patch also documents all fdb types. Removes 'temp'
from usage message since it is now replaced by 'static'.
'temp' still works and is synonymous with static.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
b3 buffer has been deleted previously so b2 is followed by b4
which is not consistent.
Signed-off-by: Dmitrii Shcherbakov <fw.dmitrii@yandex.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Remove printing according to the previously used encoding of mpu and
overhead values within the tc_ratespec's mpu field. This encoding is
no longer being used as a separate 'overhead' field in the ratespec
structure has been introduced.
Signed-off-by: Dmitrii Shcherbakov <fw.dmitrii@yandex.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Add support to be able to view and change IFLA_BRPORT_MULTICAST_ROUTER port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Export all the read-only values that get returned about a bridge port
such as the timers, the ids, designated_port and cost,
topology_change_ack and config_pending. For the bridge ids the
br_dump_bridge_id function is exported from iplink_bridge.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
netns_map_add() does a malloc of (sizeof (struct nsid_cache) +
strlen(name)) and then proceed with strcpy() of name into the
zero-length member at the end of the nsid_cache structure. The
nul-terminator is written outside of the allocated memory and may
overwrite the allocator's internal structure.
This can trigger a segmentation fault on i386 uclibc with names of size 8:
after the corruption occurs, the call to closedir() on netns_map_init()
crashes while freeing the DIR structure.
Here is the relevant valgrind output:
==1251== Memcheck, a memory error detector
==1251== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==1251== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright
info
==1251== Command: ./ip netns
==1251==
==1251== Invalid write of size 1
==1251== at 0x4011975: strcpy (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1251== by 0x8058B00: netns_map_add (ipnetns.c:181)
==1251== by 0x8058E2A: netns_map_init (ipnetns.c:226)
==1251== by 0x8058E79: do_netns (ipnetns.c:776)
==1251== by 0x804D9FF: do_cmd (ip.c:110)
==1251== by 0x804D814: main (ip.c:300)
Support for the new rx_nohandler statistic.
This code is designed to handle the case where the kernel reported statistic
structure is smaller than the larger structure in later releases (and vice versa).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support to add mpls multipath
routes.
example:
ip -f mpls route add 100 \
nexthop as 200 via inet 10.1.1.2 dev swp1 \
nexthop as 700 via inet 10.1.1.6 dev swp2
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
It seems that I've made a mistake when I exported these, instead of a
space in the end I've put a newline character which is wrong and breaks
the single line output.
Fixes: 7d6bc3b87a ("bonding: export 3ad actor and partner port state")
Reported-by: Sam Tannous <stannous@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_NF_CALL_(IP|IP6|ARP)TABLES
attributes in iproute2 so it can change their values.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_INTVL
attribute in iproute2 so it can change the startup query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
attribute in iproute2 so it can change the query response interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_INTVL attribute
in iproute2 so it can change the query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER_INTVL
attribute in iproute2 so it can change the querier interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_MEMBERSHIP_INTVL
attribute in iproute2 so it can change the membership interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_INTVL
attribute in iproute2 so it can change the last member interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Phil Sutter
Stephen Hemminger
Nikolay Aleksandrov
Hiroshi Shimamoto
Roopa Prabhu
Dmitrii Shcherbakov
David Ahern
Nicolas Cavallari