There are couple of minor improvements:
1) Check erspan_ver == 2 in gre6. It still could
be 1 if erspan_idx is 0.
2) Add tunnel encapsulation attributes only when
collect metadata not in effect in gre.
3) Trivial: address checkpatch issues.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print only "external" if collect meta data attribute
is given: rest of parameters are irrelevant. This is
to follow gre6.
For both JSON and non-JSON output use "external" for
all tunnels including vxlan and geneve.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In prepare of link_vti.c and link_vti6.c merge:
1) Make @fwmark of __u32 type instead of unsigned int
in vti to match with rest tunneling code.
2) Report when unable to translate @link network device
name to index instead of silently exiting in vti6.
3) Remove newline separating local/remote attributes
from the ikey/okey in vti6 to match vti module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Handle "inherit" case properly for gre6 and ip6tnl.
Use get_u8() in gre to parse ttl/hoplimit.
Be consistent about "hlim" alias to ttl/hoplimit
support.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Few minor changes after merge of 'master' into 'net-next' branch:
1) Follow 80 line length for printing erspan_index parameter
as we did in master with commit 2a8d0f6e9c ("gre/tunnel:
Print erspan_index using print_uint()").
2) Remove remnants of encapsulation option printing: now it
is done using tnl_print_encap() helper in commit bad76e6b1f
("ip/tunnel: Abstract tunnel encapsulation options printing").
Fixes: 8c75f69411 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We return constant string from tnl_strproto(), no need
to copy it to temporary buffer and then return such
buffer as const: return constant string instead.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both of these two changes are missing for link_vti6.c:
commit 8b47135474 ("ip: link: Unify link type help functions a bit")
commit 561e650eff ("ip link: Shortify printing the usage of link type")
Replay them on link_vti6.c to bring link type help functions
inline with other tunneling code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For vti6 tunnel we print [io]key in dotted-quad notation
(ipv4 address) while in vti we do that in hex format.
For vti tunnel we print [io]key only if value is not
zero while for vti6 we miss such check.
Unify vti and vti6 tunnel [io]key output.
While here enlarge s2 buffer to the same size as in rest
of tunnel support code (64 bytes) and check return from
inet_ntop().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
One is missing in JSON output because fprintf()
is used instead of print_uint().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Get rid of code duplications and consolidate encapsulation
options printing in single function - tnl_print_encap().
Introduce and use tnl_encap_str() to format encapsulation
option string according to tempate and given values to avoid
code duplication and simplify it.
Use print_string() instead of fputs() and fprintf() to
print encapsulation for !is_json_context().
Print "unknown" parameter for "encap" type in PRINT_FP
context using "%s " format specifier and benefit from
complite time string merge.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need for custom SPRINT_BUF() and snprintf() 0x%x
value to this buffer: we can use print_0xhex() instead
of print_string().
In link_iptnl.c use s2 instead of s1 buffer and remove
s1.
While there adjust fwmark option print order in iptnl
and ip6tnl to get it match each other.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For ip tunnels tos can be 0 when not configured, 1 when
inherited from encapsulated packet and rest specifying
diffserv (rfc2474) or tos (rfc1349) bits. It is stored
in packet tos/diffserv field and returned in tos
netlink attribute to userspace.
Simplify and unify tos printing by using print_0xhex()
and print_string() instead of fprintf() to output values.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both ttl/hoplimit is from 1 to 255. Zero has special meaning:
use encapsulated packet value. In ip-link(8) -d output this
looks like "ttl/hoplimit inherit". In JSON we have "int" type
for ttl and therefore values from 0 (inherit) to 255.
To do the best in handling ttl/hoplimit we need to accept
both cases: missing attribute in netlink dump and zero value
for "inherit"ed case. Last one is broken since JSON output
introduction for gre/iptnl versions and was never true for
gre6/ip6tnl.
For all tunnels, except ip6tnl change JSON type from "int" to
"uint" to reflect true nature of the ttl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We need NEXT_ARG() to get *argv pointing to "alias"
parameter value. Overwise we get and check "alias"
string length.
Fixes: f88becf35e ("iplink: Process "alias" parameter correctly")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When using the new minimum rate API and providing only one parameter
(minimum rate/maximum rate), we query the VF min and max rate regardless
of kernel support.
This resulted in segmentation fault in ipaddr_loop_each_vf, which tries
to access NULL pointer.
This patch identifies such cases by testing the VF table for NULL
pointer in IFLA_VF_RATE, and aborts the operation.
Aborting on the first VF is valid since if the kernel does not support
the new API for the first VF, it will not support it for the other VFs
as well.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
According to the documentation (man ip-link), the minimum TXRATE should
be always <= Maximum TXRATE, but commit f89a2a05ff ("Add support to
configure SR-IOV VF minimum and maximum Tx rate through ip tool") didn't
enforce it.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
These files are already mostly written in POSIX shell, so convert their
shebangs to /bin/sh and tweak the few bashisms in here.
URL: https://crbug.com/756559
Reported-by: Pat Erley <perley@chromium.org>
Signed-off-by: Mike Frysinger <vapier@chromium.org>
To follow gre6 output print hoplimit before encapsulation
limit in link_ip6tnl.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To follow ip6tnl output print flowlabel after tclass
in link_gre6.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use %u format specifier to print it in link_gre6.c and
make code more readable.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
flowlabel and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
Omit flowlabel from output if no flowinfo attribute
is given and IP6_TNL_F_USE_ORIG_FLOWLABEL isn't set.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
tclass and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
While there use __u32 for flowinfo in link_gre6.c
and check for IFLA_GRE_FLOWINFO attribute presense.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is implementation internal and main purpose
of printing it seems debugging.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In link_gre6.c it seems copy paste error: tclass is 8 bits,
not 20 as flowlabel.
In link_iptnl.c rename "flowinfo_tclass" to "tclass" as it
correct name since flowinfo is implementation internal name
used to label combined within u32 attribute tclass and
flowlabel.
Fixes: 1facc1c61c ("ip: link_ip6tnl.c: add json output support")
Fixes: 2e706e12d9 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It seems missing pair of open_json_object()/close_json_object()
in iptnl implementation.
Note that we open "encap" JSON object in ip6tnl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Tunnel mode does not appear in parameters print for iptnl
supported tunnels like ipip and sit, while printed for
ip6tnl.
Print tunnel mode as "proto" field name for JSON and
without any name when printing to cli to follow ip6tnl
behaviour.
For non JSON output we have:
$ ip -d link show dev sit1
Before:
-------
17: sit1@NONE: <NOARP> mtu 1480 qdisc noop state DOWN ...
link/sit X.X.X.X brd 0.0.0.0 promiscuity 0
sit remote any local X.X.X.X ...
~~~
After:
------
17: sit1@NONE: <NOARP> mtu 1480 qdisc noop state DOWN ...
link/sit X.X.X.X brd 0.0.0.0 promiscuity 0
sit any remote any local X.X.X.X ...
^^^
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both sit and ipip "mode" parameter handling nearly the same.
Except for sit we have "ip6ip" mode: check it only when
configuring sit.
Note that there is no need strcmp(lu->id, "ipip"): if it is
not sit it is "ipip" because we have only these two link util
defined in module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
netdevsim is a new software device for testing kernel APIs
without any hardware attached. Allow users to create such
devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
It is already given for original device we configure this
peer for.
Results from following command before/after change applied
are shown below:
$ ip link add dev veth1a type veth peer name veth1b \
type veth peer name veth1c
Before:
-------
<no output, no netdevs created>
After:
------
Error: duplicate "type": "veth" is the second value.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We always send flowinfo to the kernel. If flowlabel/tclass
was set first to non-inherit value and then reset to
inherit we do not clear flowlabel/tclass part in flowinfo,
send it to kernel and can get from the kernel back.
Even if we check for IP6_TNL_F_USE_ORIG_TCLASS and
IP6_TNL_F_USE_ORIG_FLOWLABEL when printing options
sending invalid flowlabel/tclass to the kernel seems
bad idea.
Note that ip6tnl always clean corresponding flowinfo
parts on inherit.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
We must clear bit, not set all but given bit.
Fixes: 858dbb208e ("ip link: Add support for remote checksum offload to IP tunnels")
Fixes: 73516e128a ("ip6tnl: Support for fou encapsulation"
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
The patch adds erspan usage description, so 'ip link help erspan'
and 'ip link help ip6erspan' shows the options.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since rtnl_talk() never returns with answer buffer allocated
on error we do not need to release it manually. After this
initializing answer with NULL before rtnl_talk() is useless.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
The patch adds support for configuring the erspan v2, for both
ipv4 and ipv6 erspan implementation. Three additional fields
are added: 'erspan_ver' for distinguishing v1 or v2, 'erspan_dir'
for specifying direction of the mirrored traffic, and 'erspan_hwid'
for users to set ERSPAN engine ID within a system.
As for manpage, the ERSPAN descriptions used to be under GRE, IPIP,
SIT Type paragraph. Since IP6GRE/IP6GRETAP also supports ERSPAN,
the patch removes the old one, creates a separate ERSPAN paragrah,
and adds an example.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When running "ip route list default" and not specifying address family,
one will get all of the routes instead of just default only. The same
is for "exact default" and "match default".
It behaves in such a way because default route with unspecified family
has the same all-zeroes value like no prefix specified at all. Thus
following code blindly ignores the fact, that prefix was actually
specified.
This patch adds the flag PREFIXLEN_SPECIFIED to the default route too.
And then checks its value when filtering routes.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Metric is one of the "unique key" fields of the route in Linux. But
still one can not use its value in filter while running ip list.
Because of this writing checks in scripts for example is incovenient.
Signed-off-by: Alexander Zubkov <green@msu.ru>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
All tunnels already support for parsing/adding zero
endpoints and vti6 isn't an exception.
This check was added as part of commit 2a80154fde
(vti6: fix local/remote any addr handling) and looks
too restrictive as purpose of change is to avoid
endpoint configuration from uninitialized data.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use specialized helper to initialize endpoint addresses with
zeros instead of open coding this. This unifies initialization
style with other ipv6 tunnel variants (i.e. gre6 and vti6).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is added with
commit a7ed1520ee ("ip/tunnel: introduce tnl_parse_key()")
to avoid code duplication in ip6?tunnel.c.
Reuse it for gre/gre6 and vti/vti6 tunnel rtnl
configuration interface with the same purpose
it is used in tunnel ioctl interface in ip6?tunnel.c.
While there change type of key variables from
unsigned integer to __be32 to reflect nature of the
value they store and place error message in
tnl_parse_key() on a single line to make single
call to fprintf().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit 625df645b7 (Check user supplied interface name lengths)
iplink_parse() validates network device name using check_ifname()
helpers.
Remove redundant "name" length checks from iplink_parse() callers.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Do not stop parameters processing after "alias" parameter: it might
not be a last one. Seems copy pasted from "type" parameter code.
Check it's length does not exceed IFALIASZ - 1. Better we warn
than get RTNL error.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Correctly check for valid network device index supplied on
command line: indexes are always greather than zero. Check
for duplicate "index" argument.
Initialize @index to 0 to simplify handling it in iplink_modify().
Other callers (link_veth.c, iplink_vxcan.c) already did so.
No need to initialize ifi_index with 0 since it is already
initialized at the @struct req initialization time and not
modified in iplink_parse().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Manual page ip-link(8) states that both local and remote accept
IPADDR not PREFIX. Use get_addr() instead of get_prefix() to
parse local/remote endpoint address correctly.
Force corresponding address family instead of using preferred_family
to catch weired cases as shown below.
Before this patch it is possible to create tunnel with commands:
ip li add dev ip6gre2 type ip6gre local fe80::1/64 remote fe80::2/64
ip -4 li add dev ip6gre2 type ip6gre local 10.0.0.1/24 remote 10.0.0.2/24
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
It is fully legal to submit zero (INADDR_ANY/IN6ADDR_ANY_INIT)
value for local and/or remote endpoints for all tunnel drivers:
no need additionally check this in userspace.
Note that all tunnel specific code already can pass zero address
to the kernel.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
The patch adds 'external' option to support collect metadata
gre6 tunnel. The 'external' keyword is already used to set the
device into collect metadata mode such as vxlan, geneve, ipip,
etc. This patch extends support for ipv6 gre and gretap.
Example of L3 and L2 gre device:
bash:~# ip link add dev ip6gre123 type ip6gre external
bash:~# ip link add dev ip6gretap123 type ip6gretap external
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Until kernel exports these, add GSO_MAX values into iplink
rather than assuming they are UINT_MAX + 1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Validate the upper limit for gso_max_size, valid range is [0-65,536]
inclusive. Fix minor whitespace in iplink man page.
Signed-off-by: Solio Sarabia <solio.sarabia@intel.com>
Add missing tag 'vxcan' inside the help text which was missing in commit
efe459c76d ('ip: link add vxcan support').
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Recently `external` support was added to the tunnel drivers, but there is no way
to introspect this from userspace. This adds support for that.
Now `ip -details link` shows it:
```
7: tunl60@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group
default qlen 1
link/tunnel6 :: brd :: promiscuity 0
ip6tnl external any remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Signed-off-by: Phil Dibowitz <phil@ipom.com>
This allows sending GSO maximum values when configuring a device.
The values are advisory. Most devices will ignore them but for some
pseudo devices such as veth pairs they can be set.
Example:
# ip link add dev vm1 type veth peer name vm2 gso_max_size 32768
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Specifying the IFLA_VXLAN_LINK attribute on a vxlan link modify is
optional in the kernel, so make the id argument optional for "ip link
set ..." to avoid a user needing to specify it when changing another
attribute.
Signed-off-by: Robert Shearman <rs823p@att.com>
Specifying "... ttl inherit" currently does nothing on a GRE link
modify since the previous ttl value is retrieved up front. Fix this by
explicitly setting ttl to 0 when "inherit" is specified for the
option, since 0 represents the semantics of inherit.
Signed-off-by: Robert Shearman <rs823p@att.com>
Looks like a typo: get_u8() returns 0 on success and -1 on error, so the
error checking here was ineffective.
Fixes: a11b7b71a6 ("link_gre6: really support encaplimit option")
Signed-off-by: Phil Sutter <phil@nwl.cc>
When xdpoffload option is used, communicate the ifindex down
to the kernel to trigger device-specific load.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_parse_common() parses and loads the program. Rename it
accordingly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Program type is needed both for parsing and loading of
the program. Parsing may also induce the type based on
signatures from __bpf_prog_meta. Instead of passing
the type around keep it in struct bpf_cfg_in.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
Expose identifier type and hook types in ILA configuraiton
and reporting. This adds support in both ip ila ILA LWT.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Configuration support in both ip ila and ip LWT for checksum
neutral-map-auto. This is a mode of ILA where checksum
neutral mapping is assumed for packets (there is no C-bit
in the identifier to indicate checksum neutral).
Signed-off-by: Tom Herbert <tom@quantonium.net>
Add checksum neutral to ip ila configuration. This control whether
the C-bit is interpreted as checksum neutral bit.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Sample output:
$ sudo ./ip/ip fou add port 111 ipproto 11
$ sudo ./ip/ip fou add port 222 ipproto 22 -6
$ ./ip/ip fou show
port 222 ipproto 22 -6
port 111 ipproto 11
Signed-off-by: Greg Greenway <ggreenway@apple.com>
As was reported [1], the iproute2 fails to compile on old systems,
in Cong's case, it was Fedora 19, in our case it was RedHat 7.2, which
failed with the following errors during compilation:
ipxfrm.c: In function ‘xfrm_selector_print’:
ipxfrm.c:479:7: error: ‘IPPROTO_MH’ undeclared (first use in this
function)
case IPPROTO_MH:
^
ipxfrm.c:479:7: note: each undeclared identifier is reported only once
for each function it appears in
ipxfrm.c: In function ‘xfrm_selector_upspec_parse’:
ipxfrm.c:1345:8: error: ‘IPPROTO_MH’ undeclared (first use in this
function)
case IPPROTO_MH:
^ make[1]: *** [ipxfrm.o] Error 1
The reason to it is the order of headers files. The IPPROTO_MH field is
set in kernel's UAPI header file (in6.h), but only in case
__UAPI_DEF_IPPROTO_V6 is set before. That define comes from other kernel's
header file (libc-compat.h) and is set in case there are no previous
libc relevant declarations.
In ip code, the include of <netdb.h> causes to indirect inclusion of
<netinet/in.h> and it sets __UAPI_DEF_IPPROTO_V6 to be zero and prevents from
IPPROTO_MH declaration.
This patch takes the simplest possible approach to fix the compilation
error by checking if IPPROTO_MH was defined before and in case it
wasn't, it defines it to be the same as in the kernel.
[1] https://www.spinics.net/lists/netdev/msg463980.html
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Riad Abo Raed <riada@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Any iproute utility that uses any function from lib/utils.c needs
to declare its own resolve_hosts variable instance although it does
not need/use hostname resolving functionality (currently only 'ip'
and 'ss' commands uses this).
The patch declares single common instance of resolve_hosts directly
in utils.c so the existing ones can be removed (the same approach
that is used for timestamp_short).
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Using 'ip deleteall' with policies that have marks, fails unless you
eplicitely specify the mark values. This is very uncomfortable when
bulk-deleting policies and states. With this patch all relevant states
and policies are wiped by 'ip deleteall' regardless of their mark
values.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Socket polices are added to a socket using setsockopt(2). They cannot be
deleted by iproute2. The attempt to delete them causes an error
(EINVAL).
To avoid this unnecessary error message all socket policies are skipped
in xfrm_policy_keep.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Listing policies on systems with a lot of socket policies can be
confusing due to the number of returned polices. Even if socket polices
are not of interest, they cannot be filtered. This patch adds an option
to filter all socket policies from the output.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
IPvlan supported bridge-only functionality prior to commits
a190d04db937 ('ipvlan: introduce 'private' attribute for all
existing modes.') and fe89aa6b250c ('ipvlan: implement VEPA mode').
These two commits allow to configure the VEPA and private modes now.
This patch adds those options in ip command.
e.g.
bash:~# ip link add link eth0 name ipvl0 type ipvlan mode l2 private
-or-
bash:~# ip link add link eth0 type ipvl0 type ipvlan mode l2 vepa
Also the output will reflect the mode and the mode-flag accordingly.
e.g.
bash:~# ip -details link show ipvl0
4: ipvl0@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc ...
link/ether 00:1a:11:44:a5:3e brd ff:ff:ff:ff:ff:ff promiscuity 0
ipvlan mode l2 private addrgenmode eui64 numtxqueues 1 ...
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
This patch adds fastopen_no_cookie option to enable/disable TCP fastopen
without a cookie on a per-route basis.
Support in Linux was added with 71c02379c762 (tcp: Configure TFO without
cookie per socket and/or per route).
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Use strtol-based API to parse and validate integer input; atoi() does
not detect errors and may yield undefined behaviour if result can't be
represented.
v2: use get_unsigned() since network namespace is really an unsigned value.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
IP6_TNL_F_ALLOW_LOCAL_REMOTE allows tunnel traffic on ip6tnl devices
where the remote endpoint is a local host address.
Specifying "[no]allow-localremote" controls the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on ip6tnl interfaces.
This is the user-space counterpart for kernel
commit 908d140a87a7 ("ip6_tunnel: Allow rcv/xmit even if remote address is a local address")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
This config maps to IFLA_BRPORT_VLAN_TUNNEL bridge port netlink
flag attribute. This flag enables vlan to tunnel mapping on a bridge
port. It is off by default.
set vlan_tunnel attribute on bridge port vxlan0:
$ip link set dev vxlan0 type bridge_slave vlan_tunnel on
$ip link set dev vxlan0 type bridge_slave vlan_tunnel off
or via bridge command
$bridge link set dev vxlan0 vlan_tunnel on
$bridge link set dev vxlan0 vlan_tunnel off
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add neigh_suppress to the type help and document it in ip-link's man page.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 530903dd90 ("ip: fix igmp parsing when iface is long") uses
variable len to keep trailing colon from interface name comparison. This
variable is local to loop body but we set it in one pass and use it in
following one(s) so that we are actually using (pseudo)random length for
comparison. This became apparent since commit b48a1161f5 ("ipmaddr: Avoid
accessing uninitialized data") always initializes len to zero so that the
name comparison is always true. As a result, "ip maddr show dev eth0" shows
IPv4 multicast addresses for all interfaces.
Instead of keeping the length, let's simply replace the trailing colon with
a null byte. The bonus is that we get correct interface name in ma.name.
Fixes: 530903dd90 ("ip: fix igmp parsing when iface is long")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Petr Vorel <pvorel@suse.cz>
This patch adds the iproute2 support for getting and setting the
per-port group_fwd_mask. It also tries to resolve the value into a more
human friendly format by printing the known protocols instead of only
the raw value.
The man page is also updated with the new option.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
neigh suppression can be used to suppress arp and nd flood
to bridge ports. It maps to the recently added
kernel support for bridge port flag IFLA_BRPORT_NEIGH_SUPPRESS.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Since kernel net-next commit c7c0bbeae950 ("net: ipmr: Add MFC offload
indication") the kernel indicates on an MFC entry whether it was offloaded
using the RTNH_F_OFFLOAD flag. Update the "ip mroute show" command to
indicate when a route is offloaded, similarly to the "ip route show"
command.
Example output:
$ ip mroute
(0.0.0.0, 239.255.0.1) Iif: sw1p7 Oifs: t_br0 State: resolved offload
(192.168.1.1, 239.255.0.1) Iif: sw1p7 Oifs: sw1p4 State: resolved offload
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
The original problem was that something like:
| strncpy(ifr.ifr_name, *argv, IFNAMSIZ);
might leave ifr.ifr_name unterminated if length of *argv exceeds
IFNAMSIZ. In order to fix this, I thought about replacing all those
cases with (equivalent) calls to snprintf() or even introducing
strlcpy(). But as Ulrich Drepper correctly pointed out when rejecting
the latter from being added to glibc, truncating a string without
notifying the user is not to be considered good practice. So let's
excercise what he suggested and reject empty, overlong or otherwise
invalid interface names right from the start - this way calls to
strncpy() like shown above become safe and the user has a chance to
reconsider what he was trying to do.
Note that this doesn't add calls to check_ifname() to all places where
user supplied interface name is parsed. In many cases, the interface
must exist already and is therefore looked up using ll_name_to_index(),
so if_nametoindex() will perform the necessary checks already.
Signed-off-by: Phil Sutter <phil@nwl.cc>
In both files' parse_args() functions as well as in iptunnel's do_prl()
and do_6rd() functions, a user-supplied 'dev' parameter is uselessly
copied into a temporary buffer before passing it to ll_name_to_index()
or copying into a struct ifreq. Avoid this by just caching the argv
pointer value until the later lookup/strcpy.
Signed-off-by: Phil Sutter <phil@nwl.cc>
When SA is added manually using "ip xfrm state add", xfrm_state_modify()
uses alg_key_len field of struct xfrm_algo for the length of key passed to
kernel in the netlink message. However alg_key_len is bit length of the key
while we need byte length here. This is usually harmless as kernel ignores
the excess data but when the bit length of the key exceeds 512
(XFRM_ALGO_KEY_BUF_SIZE), it can result in buffer overflow.
We can simply divide by 8 here as the only place setting alg_key_len is in
xfrm_algo_parse() where it is always set to a multiple of 8 (and there are
already multiple places using "algo->alg_key_len / 8").
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
This fixes a corner-case for routes with a certain metric locked to
zero:
| ip route add 192.168.7.0/24 dev eth0 window 0
| ip route add 192.168.7.0/24 dev eth0 window lock 0
Since the kernel doesn't dump the attribute if it is zero, both routes
added above would appear as if they were equal although they are not.
Fix this by taking mxlock value for the given metric into account before
skipping it if it is not present.
Reported-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
As Stephen Hemminger mentioned on the last submission the new_json_obj
function is always called with fp == stdout, so right now, there's no
need of this extra argument.
The background for the rework is the following:
The ip monitor didn't call `new_json_obj` (even for in non json context),
so the static FILE* _fp variable wasn't initialized, thus raising a
SIGSEGV in ipaddress.c. This patch should fix this issue for good, new
paths won't have to call `new_json_obj`.
How to reproduce:
$ ip -t mon label link
(gdb) bt
.#0 _IO_vfprintf_internal (s=s@entry=0x0, format=format@entry=0x45460d “%d: “, ap=ap@entry=0x7fffffff7f18) at vfprintf.c:1278
.#1 0x0000000000451310 in color_fprintf (fp=0x0, attr=<optimized out>, fmt=0x45460d “%d: “) at color.c:108
.#2 0x000000000044a856 in print_color_int (t=t@entry=PRINT_ANY, color=color@entry=4294967295, key=key@entry=0x4545fc “ifindex”,
fmt=fmt@entry=0x45460d “%d: “, value=<optimized out>) at ip_print.c:132
.#3 0x000000000040ccd2 in print_int (value=<optimized out>, fmt=0x45460d “%d: “, key=0x4545fc “ifindex”, t=PRINT_ANY) at ip_common.h:189
.#4 print_linkinfo (who=<optimized out>, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipaddress.c:1107
.#5 0x0000000000422e13 in accept_msg (who=0x7fffffff8320, ctrl=0x7fffffff8310, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipmonitor.c:89
.#6 0x000000000044c58f in rtnl_listen (rtnl=0x672160 <rth>, handler=handler@entry=0x422c70 <accept_msg>, jarg=0x7ffff77a82a0 <_IO_2_1_stdout_>)
at libnetlink.c:761
.#7 0x00000000004233db in do_ipmonitor (argc=<optimized out>, argv=0x7fffffffe5a0) at ipmonitor.c:310
.#8 0x0000000000408f74 in do_cmd (argv0=0x7fffffffe7f5 “mon”, argc=3, argv=0x7fffffffe588) at ip.c:116
.#9 0x0000000000408a94 in main (argc=4, argv=0x7fffffffe580) at ip.c:311
Fixes: 6377572f ("ip: ip_print: add new API to print JSON or regular format output")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Move the json printer which is based on json writer into the
iproute2 library, so it can be used by library code and tools
other than ip. Should probably have been done from the beginning
like that given json writer is in the library already anyway.
No functional changes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Julien Fortin <julien@cumulusnetworks.com>
Obviously, 'addr showdump' feature wasn't adjusted to json output
support. As a consequence, calls to print_string() in print_addrinfo()
tried to dereference a NULL FILE pointer.
Fixes: d0e720111a ("ip: ipaddress.c: add support for json output")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Consolidate dump of prog info to use bpf_dump_prog_info() when possible.
Moving forward, we want to have a consistent output for BPF progs when
being dumped. E.g. in cls/act case we used to dump tag as a separate
netlink attribute before we had BPF_OBJ_GET_INFO_BY_FD bpf(2) command.
Move dumping tag into bpf_dump_prog_info() as well, and only dump the
netlink attribute for older kernels. Also, reuse bpf_dump_prog_info()
for XDP case, so we can dump tag and whether program was jited, which
we currently don't show.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 72b365e8e0 ("libnetlink: Double the dump buffer size") increased
the buffer size for "ip link show" command to 32 KB to handle NICs with
large number of VFs. With "dev" filter, a different code path is taken and
iplink_get() still uses only 16 KB buffer.
The size of 32768 is not very future-proof as NICs supporting 120-128 VFs
are already in use so that single RTM_NEWLINK message in the dump can
exceed 30000 bytes. But it's what rtnl_talk() and rtnl_dump_filter_l() use
so let's be consistent. Once this proves insufficient, all three sizes
should be increased.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
If message length exceeds maxlen argument of rtnl_talk(), it is truncated
to maxlen but unlike in the case of truncation to the length of local
buffer in rtnl_talk(), the caller doesn't get any indication of a problem.
In particular, iplink_get() passes the truncated message on and parsing it
results in various warnings and sometimes even a segfault (observed with
"ip link show dev ..." for a NIC with 125 VFs).
Handle message truncation in iplink_get() the same way as truncation in
rtnl_talk() would be handled: return an error.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
This patch converts spots where manual buffer termination was missing to
strlcpy() since that does what is needed.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Print the value analogous to flowlabel. While being at it, also break
the overlong lines to not exceed 80 characters boundary.
Signed-off-by: Phil Sutter <phil@nwl.cc>
When trying to change tclass or flowlabel of a GREv6 tunnel which has
the respective value set already, the code accidentally bitwise OR'ed
the old and the new value, leading to unexpected results. Fix this by
clearing the relevant bits of flowinfo variable prior to assigning the
new value.
Fixes: af89576d7a ("iproute2: GRE over IPv6 tunnel support.")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch adds support for the L2ENCAP seg6 mode, enabling to encapsulate
L2 frames within SRv6 packets.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
The original issue was that filter.name might end up unterminated if
user provided string was too long. But in fact it is not necessary to
copy the commandline parameter at all: just make filter.name point to it
instead.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The patch adds ERSPAN type II tunnel support. The implementation is
based on the draft at
https://tools.ietf.org/html/draft-foschiano-erspan-01.
One of the purposes is for Linux box to be able to receive ERSPAN
monitoring traffic sent from the Cisco switch, by creating a ERSPAN
tunnel device. In addition, the patch also adds ERSPAN TX, so traffic
can also be encapsulated into ERSPAN and sent out.
The implementation reuses the key as ERSPAN session ID, and
field 'erspan' as ERSPAN Index fields:
./ip link add dev ers11 type erspan seq key 100 erspan 123 \
local 172.16.1.200 remote 172.16.1.100
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Meenakshi Vohra <mvohra@vmware.com>
This renames Config to config.mk and includes more Make input.
Now configure generates all the required CFLAGS and LDLIBS for
the optional libraries.
Also, use pkg-config to test for libelf, rather than using a test
program. This makes it consistent with other libraries.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
can_state_names array contains at most CAN_STATE_MAX fields, so allowing
an index to it to be equal to that number is wrong. While here, also
make sure the array is indeed that big so nothing bad happens if
CAN_STATE_MAX ever increases.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Covscan complained about dead code but after reading it, I assume the
author's intention was to prefix the interface list with 'Oifs: '.
Initializing first to 1 and setting it to 0 after above prefix was
printed should fix it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This variable is initialized at declaration and nowhere else does any
assignment to it happen, so just drop the check.
Signed-off-by: Phil Sutter <phil@nwl.cc>
ila_csum_name2mode() returning -1 on error but being declared as
returning __u8 doesn't make much sense. Change the code to correctly
detect this issue. Checking for __u8 overruns shouldn't be necessary
though since ila_csum_name2mode() return values are well-defined.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This prevents word-splitting and therefore leads to more accurate error
message in case 'grep -c' prints something other than a number.
Signed-off-by: Phil Sutter <phil@nwl.cc>
To avoid code duplication and have a ligther impact on most of the files,
these functions were made to handle both stdout (FP context) or JSON
output. Using this api, the changes are easier to read and the code
stays as compact as possible.
includes json_writer.h in ip_common.h to make the lib/json_writer.c
functions available to the new "ip_print" api.
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
This patch adds support for the seg6local lightweight tunnel
("ip route add ... encap seg6local ...").
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Commit 69fed534a5 ("change how Config is used in Makefile's") moved
HAVE_MNL specific CFLAGS/LDLIBS for building with libmnl out of the
top level Makefile into sub-Makefiles. However, it also removed the
HAVE_ELF specific CFLAGS/LDLIBS entirely, which breaks the BPF object
loader for tc and ip with "No ELF library support compiled in." despite
having libelf detected in configure script. Fix it similarly as in
69fed534a5 for HAVE_ELF.
Fixes: 69fed534a5 ("change how Config is used in Makefile's")
Reported-by: Jeffrey Panneman <jeffrey.panneman@tno.nl>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The ikey and okey value are normal u32 values. The input accepts
them in dotted, hex or decimal form. For output, hex seems like
the best form since they are not really addresses.
Suggested-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
According to the IPv4 behavior of 'ip' it should be possible
to omit the arguments for local and remote address.
Without this patch omitting these parameters would lead to
uninitialized memory being interpreted as IPv6 addresses.
Reported-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When ip netns {add|delete} is first run, it bind-mounts /var/run/netns
on top of itself, then marks it as shared. However, if there are already
bind-mounts in the directory from other tools, these would not be
propagated. Fix this by recursively bind-mounting.
Signed-off-by: Casey Callendrello <casey.callendrello@coreos.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Since kernel commit 475abbf1ef67 ("ipv4: fib: Set offload indication
according to nexthop flags") offload indication is reported on a
per-nexthop basis.
Adjust iproute2 to display it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
For the most of the address flags, use a table of values rather
than open coding every value. This allows for easier inevitable
expansion of flags.
This also fixes the missing stable-privacy flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ip netns accepts invalid input as namespace name like an empty string or a
string longer than the maximum file name length.
Check that the netns name is not empty and less than or equal to NAME_MAX.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Ability to change geneve device attributes was added to kernel through
commit 5b861f6baa3a ("geneve: add rtnl changelink support"), however one
cannot do the same through ip-link(8) command. Changing the allowed
geneve device attributes using 'ip link set <geneve_name> type geneve id
<geneve_id> <allowed_attributes>' currently fails with 'operation not
supported' error. This patch adds support for it.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
This patch replaces exits with returns in ip route
commands.
Allows to continue when invoked with ip -batch.
Signed-off-by: Élie Bouttier <elie@bouttier.eu>
In the presence of firewalls which improperly block ICMP Unreachable
(including Fragmentation Required) messages, Path MTU Discovery is
prevented from working.
The workaround is to handle IPv4 payloads opaquely, ignoring the DF
bit.
Kernel commit 22a59be8b7693eb2d0897a9638f5991f2f8e4ddd ("net: ipv4:
Add ability to have GRE ignore DF bit in IPv4 payloads") is
complemented by this user-space changeset which exposes control of
this setting.
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
ip netns keeps track of created namespaces with bind mounts named
/var/run/netns/<namespace>. No input sanitization is done, allowing creation and
deletion of files relatives to /var/run/netns or, if the path is non existent or
invalid, allows to create "untracked" namespaces (invisible to the tool).
This commit denies creation or deletion of namespaces with names contaning
"/" or matching exactly "." or "..".
Signed-off-by: Matteo Croce <mcroce@redhat.com>
This patch extends route get to support mpls specific
route attributes like RTA_NEWDST.
Input:
RTA_DST - input label
RTA_NEWDST - labels in packet for multipath selection
By default the getroute handler returns matched
nexthop label, via and oif
With fibmatch keyword (RTM_F_FIB_MATCH flag), full matched
route is returned.
example:
$ip -f mpls route show
101
nexthop as to 102/103 via inet 172.16.2.2 dev virt1-2
nexthop as to 302/303 via inet 172.16.12.2 dev virt1-12
201
nexthop as to 202/203 via inet6 2001:db8:2::2 dev virt1-2
nexthop as to 402/403 via inet6 2001:db8:12::2 dev virt1-12
$ip -f mpls route get 103
RTNETLINK answers: Network is unreachable
$ip -f mpls route get 101
101 as to 102/103 via inet 172.16.2.2 dev virt1-2
$ip -f mpls route get as to 302/303 101
101 as to 302/303 via inet 172.16.12.2 dev virt1-12
$ip -f mpls route get fibmatch 103
RTNETLINK answers: Network is unreachable
$ip -f mpls route get fibmatch 101
101
nexthop as to 102/103 via inet 172.16.2.2 dev virt1-2
nexthop as to 302/303 via inet 172.16.12.2 dev virt1-12
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Let XDP link set command request that the program be offloaded.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Allow user to select XDP DRV_MODE flag by using xdpdrv keyword
instead of xdp or xdpgeneric.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Add interpretation of XDP_ATTACHED_HW mode on dump.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support to the newly added IFLA_XDP_PROG_ID.
./ip link show dev eth0
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdpgeneric/id:2 qdisc [...]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
If a header that includes linux/in6.h is included before
iproute's utils.h, then iproute2 fails to compile on older
glibc versions.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
After upstream commit 5071034e4af7 ('neigh: Really delete an arp/neigh entry
on "ip neigh delete" or "arp -d"'), we could delete a single FAILED neighbour
entry now. But `ip neigh flush` still skip the FAILED entry.
Move the filter after first round flush so we can flush FAILED entry on fixed
kernel and also do not keep retrying on old kernel.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Serhey Popovych
David Ahern
Gal Pressman
Mike Frysinger
Filip Moc
Jakub Kicinski
William Tu
Alexander Zubkov
Stephen Hemminger
Solio Sarabia
Oliver Hartkopp
Phil Dibowitz
Robert Shearman
Phil Sutter
Nishanth Devarajan
Tom Herbert
Greg Greenway
Leon Romanovsky
Ivan Vecera
Thomas Egerer
Mahesh Bandewar
Christoph Paasch
Roman Mashak
Shmulik Ladkani
Roopa Prabhu
Hangbin Liu
Nikolay Aleksandrov
Stephen Hemminger
Michal Kubecek
Yotam Gigi
Julien Fortin
Daniel Borkmann
David Lebrun
Casey Callendrello
Ido Schimmel
Matteo Croce
Girish Moodalbail
Élie Bouttier
Philip Prindeville
Krister Johansen
Martin KaFai Lau