The code is a bit messy, as it starts with space after text and at some
point switches to space before text. But either way, printing space
before *and* after text almost certainly leads to printing more
whitespace than necessary.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Prior to this patch, If one route entry's RTA_PREFSRC and RTA_GATEWAY
both were NULL, it was supposed to be restored ONLY as a local address.
But as it didn't check tb[RTA_PREFSRC] when restoring local networks,
rtattr_cmp would return a success if it was NULL, this route entry would
be restored again as a local network.
This patch is to add tb[RTA_PREFSRC] check when restoring local networks.
Fixes: 74af8dd962 ("ip route: restore route entries in correct order")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Phil Sutter <phil@nwl.cc>
Currently, the `ip ila` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: ec71cae0bb ("ila: Support for configuring ila to use netfilter hook")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip fou` command tries to initialize a genl context even
when we just want to see the help for the command, which doesn't require
to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: 6928747b6e ("ip fou: Support to configure foo-over-udp RX")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip macsec` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: b26fc590ce ("ip: add MACsec support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
All users of genl have the same code to open a genl socket and resolve
the family for their specific protocol. Introduce a helper to initialize
the handle, and use it in all the genl code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
since kernel driver has valid default values for 'cipher' and 'icvlen',
there is no need for requiring users to specify both of them when a new
link is added. Also, prompt an error message and exit with appropriate
exit status in case of unsupported cipher suite.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
fix output of "ip address help" and "ip link help". Update TYPE list in man
pages ip-address.8 and ip-link.8 as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Since parse_rtattr_flags() calls memset already, there is no need for
callers to do so themselves.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Sometimes we cannot restore route entries, because in kernel
[1] fib_check_nh()
[2] fib_valid_prefsrc()
cause some routes to depend on existence of others while adding.
For example, we saved all the routes, and flushed all tables
[a] default via 192.168.122.1 dev eth0
[b] 192.168.122.0/24 dev eth0 src 192.168.122.21
[c] broadcast 127.0.0.0 dev lo table local src 127.0.0.1
[d] local 127.0.0.0/8 dev lo table local src 127.0.0.1
[e] local 127.0.0.1 dev lo table local src 127.0.0.1
[f] broadcast 127.255.255.255 dev lo table local src 127.0.0.1
[g] broadcast 192.168.122.0 dev eth0 table local src 192.168.122.21
[h] local 192.168.122.21 dev eth0 table local src 192.168.122.21
[i] broadcast 192.168.122.255 dev eth0 table local src 192.168.122.21
Now start to restore them:
If we want to add [a], we have to add [b] first, as [1] and
'via 192.168.122.1' in [a].
If we want to add [b], we have to add [h] first, as [2] and
'src 192.168.122.21' in [b].
So the correct order to restore should be like:
[e][h] -> [b][c][d][f][g][i] -> [a]
This patch fixes it by traversing the file 3 times, it only restores
part of them in each run according to the following conditions, to
make sure every entry can be restored successfully.
1. !gw && (!fib_prefsrc || fib_prefsrc == cfg->fc_dst)
2. !gw && (fib_prefsrc != cfg->fc_dst)
3. gw
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
Add vrf keyword to 'ip route' commands. Allows:
1. Users can list routes by VRF name:
$ ip route show vrf NAME
VRF tables have all routes including local and broadcast routes.
The VRF keyword filters LOCAL and BROADCAST routes; to see all
routes the table option can be used. Or to see local routes only
for a VRF:
$ ip route show vrf NAME type local
2. Add or delete a route for a VRF:
$ ip route {add|delete} vrf NAME <route spec>
3. Do a route lookup for a VRF:
$ ip route get vrf NAME ADDRESS
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add ipvrf_get_table to lookup table id for device name. Returns 0
on any error or if name is not a VRF device.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add vrf keyword to 'ip neigh' commands. Allows listing neighbor
entries for all links associated with a given VRF.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add vrf keyword to 'ip link' and 'ip addr' commands (common list code).
Allows:
1. Adding a link to a VRF
$ ip link set NAME vrf NAME
Removing a link from a VRF still uses 'ip link set NAME nomaster'
2. Showing links associated with a VRF:
$ ip link show vrf NAME
3. List addresses associated with links in a VRF
$ ip -br addr show vrf red
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Since the function won't ever change the data 'kind' is pointing at, it
can sanely be made const.
Fixes: e0513807f6 ("ip-address: Support filtering by slave type, too")
Suggested-by: Stephen Hemminger <shemming@brocade.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Currently a timeout is multiplied by HZ in user-space and
then it multiplied by HZ in kernel-space.
$ ./ip/ip r add 2002::0/64 dev veth1 expires 10
$ ./ip/ip -6 r
2002::/64 dev veth1 metric 1024 linkdown expires 996sec pref medium
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Stephen Hemminger <shemming@brocade.com>
Fixes: 68eede2505 ("route: allow routes to be configured with expire values")
Signed-off-by: Andrew Vagin <avagin@virtuozzo.com>
This patch allows to query all interfaces enslaved to a bridge or bond
using the following syntax:
| ip addr show type bridge_slave
Filtering has to be done in userspace since the kernel does not support
filtering on IFLA_INFO_SLAVE_KIND.
Functionality introduced in this patch is not fully complete since it
does not allow to match on type and slave type at the same time, but it
doesn't prevent implementing a dedicated slave_type match, either.
Signed-off-by: Phil Sutter <phil@nwl.cc>
On Tue, Jun 21, 2016 at 06:18 PM CEST, Phil Sutter <phil@nwl.cc> wrote:
> By combining the attribute extraction and check for existence, the
> additional indentation level in the 'else' clause can be avoided.
>
> In addition to that, common actions for 'daddr' are combined since the
> function returns if neither of the branches are taken.
>
> Signed-off-by: Phil Sutter <phil@nwl.cc>
> ---
> ip/tcp_metrics.c | 45 ++++++++++++++++++---------------------------
> 1 file changed, 18 insertions(+), 27 deletions(-)
>
> diff --git a/ip/tcp_metrics.c b/ip/tcp_metrics.c
> index f82604f458ada..899830c127bcb 100644
> --- a/ip/tcp_metrics.c
> +++ b/ip/tcp_metrics.c
> @@ -112,47 +112,38 @@ static int process_msg(const struct sockaddr_nl *who, struct nlmsghdr *n,
> parse_rtattr(attrs, TCP_METRICS_ATTR_MAX, (void *) ghdr + GENL_HDRLEN,
> len);
>
> - a = attrs[TCP_METRICS_ATTR_ADDR_IPV4];
> - if (a) {
> + if ((a = attrs[TCP_METRICS_ATTR_ADDR_IPV4])) {
Copy the pointer inside the branch?
Same gain on indentation while keeping checkpatch happy.
I only compile-tested the patch below.
Thanks,
Jakub
I forgot to change the variable in the conditional, too.
Fixes: 8fe58d5894 ("iplink: Check address length via netlink")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a feature which was lost during the conversion to netlink
interface: If the device exists and a user tries to change the link
layer address, query the kernel for the old address first and reject the
new one if sizes differ.
This patch adds the same check when setting VF address by assuming same
length as PF device.
Note that at least for VFs the check can't be done in kernel space since
struct ifla_vf_mac lacks a length field and due to netlink padding the
exact size can't be communicated to the kernel.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Kernel commit 96c63fa7393d ("net: Add l3mdev rule") added support for
the FRA_L3MDEV attribute. The attribute enables use of l3mdev rules
which mean 'get table id from l3 master device'. This patch adds
support to iproute2 to show, add and delete rules with this attribute.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Phil Sutter
Eric Dumazet
Xin Long
Sabrina Dubroca
Tom Herbert
Stephen Hemminger
Davide Caratti
Shanker Wang
Eli Cohen
David Ahern
Andrew Vagin
Jakub Sitnicki