Both rtnl_talk and rtnl_dump had a callback for handling portions
of netlink message that do not match the correct pid or seq.
But this callback was never used by any part of iproute2 so remove
it.
Add ip link command parsing for VF spoof checking enable/disable
V2 - Fixed problem with parsing of dump info on kernels that don't
support the spoof checking option and also wrapped the ifla_vf_info
structure in #ifdef __KERNEL__ to prevent user space from directly
accessing the structure
V3 - Improved parsing of vfinfo
V4 - Put Makefile back to proper list of subdirs
V5 - Remove struct ifla_vf_info, it is only used by the kernel
V6 - Make sure spoof check is reported by the driver - rtnl will set
it to -1 to indicate driver didn't report a value.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alternative fix to problem reported by: Bin Li
The issue is came from https://bugzilla.novell.com/show_bug.cgi?id=681952.
In any previous version (since suse ... 10.0?), ip addr add always returned
the error code 2 in case the ip address is already set on the interface:
inet 172.16.2.3/24 brd 172.16.2.255 scope global bond0
RTNETLINK answers: File exists
2
On 11.4, it returns the exit code 254:
inet 172.16.1.1/24 brd 172.16.1.255 scope global eth0
RTNETLINK answers: File exists
254
This of course causes ifup to return an error in this quite common case..
When changing ip6ip6 parameters (ip -6 tun change), ip passes zeroed
struct ip6_tnl_parm to the kernel. The kernel then tries to change all of
the tunnel parameters to the passed values, including zeroing of local and
remote address. This fails (-EEXIST in net/ipv6/ip6_tunnel.c:ip6_tnl_ioctl).
For other tunnel types, ip fetches the current parameters first and applies
the required changes on top of them. This patch applies the same code as in
ip/iptunnel.c to ip/ip6tunnel.c.
See http://bugzilla.redhat.com/730627 for the original bug report.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Add bridge as a supported type with 'ip link' in usage and all the missing
types in 'ip' man page. Also fixed some typos.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Use O_EXCL so that we only create and mount a new network namespace
if there is no chance an existing network namespace is present.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
If libc has setns present use that version instead of
rolling the syscall wrapper by hand.
Dan McGee found the following compile error:
gcc -D_GNU_SOURCE -O2 -Wstrict-prototypes -Wall -I../include
-DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib/\" -c -o ipnetns.o ipnetns.c
ipnetns.c:31:12: error: static declaration of ‘setns’ follows non-static
declaration
/usr/include/bits/sched.h:93:12: note: previous declaration of ‘setns’
was here
make[1]: *** [ipnetns.o] Error 1
Reported-by: Dan McGee <dan@archlinux.org>
Tested-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
$ ip route help 2>&1 | grep monitor
ip route { add | del | change | append | replace | monitor } ROUTE
$ ip route monitor
Command "monitor" is unknown, try "ip route help".
(I guess what was really intended is "ip monitor route", so just remove
the argument from the help output.)
Originally reported by martin f krafft at http://bugs.debian.org/537681
While at it, also drop all non-existant (route,link,netns) monitor
arguments from the ip(8) man page.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
The goal of this code change is to implement a mechanism such that it is
simple to work with a kernel that is using multiple network namespaces
at once.
This comes in handy for interacting with vpns where there may be rfc1918
address overlaps, and different policies default routes, name servers
and the like.
Configuration specific to a network namespace that would ordinarily be
stored under /etc/ is stored under /etc/netns/<name>. For example if
the dns server configuration is different for your vpn you would create
a file /etc/netns/myvpn/resolv.conf.
File descriptors that can be used to manipulate a network namespace can
be created by opening /var/run/netns/<NAME>.
This adds the following commands to iproute.
ip netns add NAME
ip netns delete NAME
ip netns monitor
ip netns list
ip netns exec NAME cmd ....
ip link set DEV netns NAME
ip netns exec exists to cater the vast majority of programs that only
know how to operate in a single network namespace. ip netns exec
changes the default network namespace, creates a new mount namespace,
remounts /sys and bind mounts netns specific configuration files to
their standard locations.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The ip(8) man page and the "ip xfrm [ XFRM-OBJECT ] help" command output
are updated to include missing options, fix errors, and improve grammar.
There are no functional changes made.
The documentation for the ip command has many different meanings for the
same formatting symbols (which really needs to be fixed). This patch makes
consistent use of brackets [ ] to indicate optional parameters, pipes | to
mean "OR", braces { } to group things together, and dashes - instead of
underscores _ inside of parameter names. The parameters are listed in the
order in which they are parsed in the source code.
There are several parameters and options that are still not mentioned or
need to be described more thoroughly in the "COMMAND SYNTAX" section of
the ip(8) man page. I would appreciate help from the developers with this.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Eric Dumazet a écrit :
> We currently use an expensive ioctl() to get device txqueuelen, while
> rtnetlink gave it to us for free. This patch speeds up ip link operation
> when many devices are registered.
>
Here is a 2nd version od this patch, not displaying "qlen 0" useless info
[PATCH iproute2] ip: Support IFLA_TXQLEN in ip link show command
We currently use an expensive ioctl() to get device txqueuelen, while
rtnetlink gave it to us for free. This patch speeds up ip link operation
when many devices are registered.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
If the continue is taken, then there is a memory leak.
https://bugzilla.novell.com/show_bug.cgi?id=538996
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Brandon Philips <bphilips@suse.de>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
Hi,
here is a patch against iproute2 to allow user to set a state with a specific
auth length.
Example:
$ ip xfrm state add src 10.16.0.72 dst 10.16.0.121 proto ah spi 0x10000000
auth-trunc "sha256" "azertyuiopqsdfghjklmwxcvbn123456" 96 mode tunnel
$ ip xfrm state
src 10.16.0.72 dst 10.16.0.121
proto ah spi 0x10000000 reqid 0 mode tunnel
replay-window 0
auth-trunc hmac(sha256)
0x617a6572747975696f707173646667686a6b6c6d77786376626e313233343536 96
sel src 0.0.0.0/0 dst 0.0.0.0/0
Regards,
Nicolas
>From 522ed7348cdf3b6f501af2a5a5d989de1696565a Mon Sep 17 00:00:00 2001
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Thu, 23 Dec 2010 06:48:12 -0500
Subject: [PATCH] iproute2: allow to specify truncation bits on auth algo
Attribute XFRMA_ALG_AUTH_TRUNC can be used to specify
truncation bits, so we add a new algo type: auth-trunc.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
Since July 2008 (2.6.27, c1e20f7c8b9), the kernel stores the values for
RTAX_{RTT{,VAR},RTO_MIN} in milliseconds. When using a kernel > 2.6.27 with
the current iproute2, conversion of these values is broken in either way.
This patch
* updates the code to pass and retrieve milliseconds;
* since values < 1msec would be rounded up, also drops the usec/nsec variants;
* since there is no way to query kernel HZ, also drops the jiffies variant.
Arguments such as
rtt 3.23sec
rto_min 0xff
rto_min 0.200s
rttvar 25ms
now all work as expected when reading back previously set values.
In the Linux kernel, ipsec policy and SAs can include a
security context to support MAC networking. This feature
is often referred to as "labeled ipsec".
This patchset adds security context support into ip xfrm
such that a security context can be included when
add/delete/display SAs and policies with the ip command.
The user provides the security context when adding
SAs and policies. If a policy or SA contains a security
context, the changes allow the security context to be displayed.
For example,
ip xfrm state
src 10.1.1.6 dst 10.1.1.2
proto esp spi 0x00000301 reqid 0 mode transport
replay-window 0
auth hmac(digest_null) 0x3078
enc cbc(des3_ede) 0x6970763672656164796c6f676f33646573636263696e3031
security context root:system_r:unconfined_t:s0
Please let me know if all is ok with the patchset.
Thanks!!
regards,
Joy
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Add support for 'passthru' mode when creating a macvlan/macvtap device
which allows takeover of the underlying device and passing it to a KVM
guest using virtio with macvtap backend.
Only one macvlan device is allowed in passthru mode and it inherits
the mac address from the underlying device and sets it in promiscuous
mode to receive and forward all the packets.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Hi,
here is a patch against iproute2 to allow user to set a state with a specific
auth length.
Example:
$ ip xfrm state add src 10.16.0.72 dst 10.16.0.121 proto ah spi 0x10000000
auth-trunc "sha256" "azertyuiopqsdfghjklmwxcvbn123456" 96 mode tunnel
$ ip xfrm state
src 10.16.0.72 dst 10.16.0.121
proto ah spi 0x10000000 reqid 0 mode tunnel
replay-window 0
auth-trunc hmac(sha256)
0x617a6572747975696f707173646667686a6b6c6d77786376626e313233343536 96
sel src 0.0.0.0/0 dst 0.0.0.0/0
Regards,
Nicolas
>From 522ed7348cdf3b6f501af2a5a5d989de1696565a Mon Sep 17 00:00:00 2001
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Thu, 23 Dec 2010 06:48:12 -0500
Subject: [PATCH] iproute2: allow to specify truncation bits on auth algo
Attribute XFRMA_ALG_AUTH_TRUNC can be used to specify
truncation bits, so we add a new algo type: auth-trunc.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
Since July 2008 (2.6.27, c1e20f7c8b9), the kernel stores the values for
RTAX_{RTT{,VAR},RTO_MIN} in milliseconds. When using a kernel > 2.6.27 with
the current iproute2, conversion of these values is broken in either way.
This patch
* updates the code to pass and retrieve milliseconds;
* since values < 1msec would be rounded up, also drops the usec/nsec variants;
* since there is no way to query kernel HZ, also drops the jiffies variant.
Arguments such as
rtt 3.23sec
rto_min 0xff
rto_min 0.200s
rttvar 25ms
now all work as expected when reading back previously set values.
In the Linux kernel, ipsec policy and SAs can include a
security context to support MAC networking. This feature
is often referred to as "labeled ipsec".
This patchset adds security context support into ip xfrm
such that a security context can be included when
add/delete/display SAs and policies with the ip command.
The user provides the security context when adding
SAs and policies. If a policy or SA contains a security
context, the changes allow the security context to be displayed.
For example,
ip xfrm state
src 10.1.1.6 dst 10.1.1.2
proto esp spi 0x00000301 reqid 0 mode transport
replay-window 0
auth hmac(digest_null) 0x3078
enc cbc(des3_ede) 0x6970763672656164796c6f676f33646573636263696e3031
security context root:system_r:unconfined_t:s0
Please let me know if all is ok with the patchset.
Thanks!!
regards,
Joy
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
This reverts commit 632110aa0d.
There seem to be some recent changes in the 802.1Qbh/bg specs which may
result in changes to this patch in the near future. It seems like its best
to ignore this patch for now.
I will re-spin at a later time when the changes in the specs converge.
BTW, Please let me know if I should CC netdev list and others on the
original email. I can resend this email.
Thanks,
Roopa
Stephen Hemminger
Greg Rose
Thomas Jarosch
Jiri Benc
Sridhar Samudrala
Dan McGee
Eric W. Biederman
Andreas Henriksson
Christoph Biedl
David Ward
Eric Dumazet
Ulrich Weber
Brandon Philips
Stephen Hemminger
Vlad Dogaru
Nicolas Dichtel
Gerrit Renker
Joy Latten
Jiri Pirko