'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Jan-Erik reported an assertion in bpf_prog_to_subdir() failed where
type was BPF_PROG_TYPE_UNSPEC, which is only used in bpf_init_env()
to auto-mount and cache the bpf fs mount point.
Therefore, make sure when bpf_init_env() is called multiple times
(f.e. eBPF classifier with eBPF action attached) and bpf_mnt_cached
is set already that the type is also valid. In bpf_init_env(), we're
only interested in the mount point and not a type-specific subdir.
Fixes: e42256699c ("bpf: make tc's bpf loader generic and move into lib")
Reported-by: Jan-Erik Rediger <janerik@rediger.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
COLORFGBG environment variable is used to detect dark background.
Idea and a bit of code is borrowed from Vim, thanks.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute2 can inconsistently show the name of protocol 0 if a route with
a custom protocol is added. For example:
dsa@cartman:~$ ip -6 ro ls table all | egrep 'proto none|proto unspec'
local ::1 dev lo table local proto none metric 0 pref medium
local fe80::225:90ff:fecb:1c18 dev lo table local proto none metric 0 pref medium
local fe80::92e2:baff:fe5c:da5d dev lo table local proto none metric 0 pref medium
protocol 0 is pretty printed as "none". Add a route with a custom protocol:
dsa@cartman:~$ sudo ip -6 ro add 2001:db8:200::1/128 dev eth0 proto 123
And now display has switched from "none" to "unspec":
dsa@cartman:~$ ip -6 ro ls table all | egrep 'proto none|proto unspec'
local ::1 dev lo table local proto unspec metric 0 pref medium
local fe80::225:90ff:fecb:1c18 dev lo table local proto unspec metric 0 pref medium
local fe80::92e2:baff:fe5c:da5d dev lo table local proto unspec metric 0 pref medium
The rt_protos file has the id to name mapping as "unspec" while
rtnl_rtprot_tab[0] has "none". The presence of a custom protocol id
triggers reading the rt_protos file and overwriting the string in
rtnl_rtprot_tab. All of this is logic from 2004 and earlier.
Update rtnl_rtprot_tab to "unspec" to match the enum value.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Frank reported that table ids for very large numbers are not properly
detected:
$ ip li add foobar type vrf table 98765432100123456789
command succeeds and resulting table id is actually:
21: foobar: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether da:ea:d4:77:38:2a brd ff:ff:ff:ff:ff:ff promiscuity 0
vrf table 4294967295 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Make the temp variable 'i' unsigned long and let the typecast to u32
happen on assignment to id.
Reported-by: Frank Kellermann <frank.kellermann@atos.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add support for reading proto id/name mappings from rt_protos.d
directory. Allows users to have custom protocol values converted
to human friendly names.
Each file under rt_protos.d has the 'id name' format used by
rt_protos. Only .conf files are read and parsed.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently, if a non-root user attempts to run ip vrf exec a non-helpful
error is returned:
$ ip vrf exec mgmt bash
Failed to mount cgroup2. Are CGROUPS enabled in your kernel?
Only show the CGROUPS kernel hint for the ENODEV error and for the
rest show the strerror for the errno. So now:
$ ip/ip vrf exec mgmt bash
Failed to mount cgroup2: Operation not permitted
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Andy reported a missing newline if a non-root user attempts to run
'ip vrf exec':
$ ./ip/ip vrf exec default /bin/echo asdf
mkdir failed for /var/run/cgroup2: Permission deniedFailed to setup vrf cgroup2 directory
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
A recent cleanup causes a compile warning on Debian jessie:
CC utils.o
utils.c: In function ‘get_addr_1’:
utils.c:486:21: warning: passing argument 1 of ‘ll_addr_a2n’ from incompatible pointer type
len = ll_addr_a2n(&addr->data, sizeof(addr->data), name);
^
In file included from utils.c:34:0:
../include/rt_names.h:27:5: note: expected ‘char *’ but argument is of type ‘__u32 (*)[8]’
int ll_addr_a2n(char *lladdr, int len, const char *arg);
^
Revert the removal of the typecast
Fixes: e1933b9281 ("utils: cleanup style")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
iplink_vrf has 2 functions used to validate a user given device name is
a VRF device and to return the table id. If the user string is not a
device name ip commands with a vrf keyword show a confusing error
message: "RTNETLINK answers: No such device".
Add a variant of rtnl_talk that does not display the "RTNETLINK answers"
message and update iplink_vrf to use it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add make_path to recursively call mkdir as needed to create a given
path with the given mode.
Add find_cgroup2_mount to lookup path where cgroup2 is mounted. If it
is not already mounted, cgroup2 is mounted under /var/run/cgroup2 for
use by iproute2.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Adds support to configure BPF programs as nexthop actions via the LWT
framework.
Example:
ip route add 192.168.253.2/32 \
encap bpf out obj lwt_len_hist_kern.o section len_hist \
dev veth0
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Now that we made the BPF loader generic as a library, reuse it
for loading XDP programs as well. This basically adds a minimal
start of a facility for iproute2 to load XDP programs. There
currently only exists the xdp1_user.c sample code in the kernel
tree that sets up netlink directly and an iovisor/bcc front-end.
Since we have all the necessary infrastructure in place already
from tc side, we can just reuse its loader back-end and thus
facilitate migration and usability among the two for people
familiar with tc/bpf already. Sharing maps, performing tail calls,
etc works the same way as with tc. Naturally, once kernel
configuration API evolves, we will extend new features for XDP
here as well, resp. extend dumping of related netlink attributes.
Minimal example:
clang -target bpf -O2 -Wall -c prog.c -o prog.o
ip [-force] link set dev em1 xdp obj prog.o # attaching
ip [-d] link # dumping
ip link set dev em1 xdp off # detaching
For the dump, intention is that in the first line for each ip
link entry, we'll see "xdp" to indicate that this device has an
XDP program attached. Once we dump some more useful information
via netlink (digest, etc), idea is that 'ip -d link' will then
display additional relevant program information below the "link/
ether [...]" output line for such devices, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Kernel commit 21116b7068b9 ("bpf: add owner_prog_type and accounted mem
to array map's fdinfo") added support for telling the owner prog type in
case of prog arrays. Give a notification to the user when they differ,
and the program eventually fails to load.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
The log buffer is automatically grown when the verifier output does not
fit into the default buffer size. The number of growing attempts was
not sufficient to reach the maximum buffer size so far.
Perform 9 iterations to reach max and let the 10th one fail.
j:0 i:65536 max:16777215
j:1 i:131072 max:16777215
j:2 i:262144 max:16777215
j:3 i:524288 max:16777215
j:4 i:1048576 max:16777215
j:5 i:2097152 max:16777215
j:6 i:4194304 max:16777215
j:7 i:8388608 max:16777215
j:8 i:16777216 max:16777215
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
In case if some diag module is not present in the system,
say the kernel is not modern enough, we simply skip the
error code reported. Instead we should check for data
length in NLMSG_DONE and process unsupported case.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Fixes commit 246f57c4086d99fa ("ip link: Add support for kernel
side filtering").
This patch reduce the size of message sent to kernel space. Before this
patch, for command: 'ip link show', we will sent 1056 bytes. With this
patch, we only need to send 40 bytes.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
In the situation where more than one entry live in the same hash bucket,
loop to get the correct one.
Before:
$ cat /etc/iproute2/group
0 default
256 test
$ sudo ip link set group test dummy1
$ ip link show type dummy
11: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group 0 qlen 1000
link/ether 4e:3b:d3:6c:f0:e6 brd ff:ff:ff:ff:ff:ff
12: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group test qlen 1000
link/ether d6:9c:a4:1f:e7:e5 brd ff:ff:ff:ff:ff:ff
After:
$ ip link show type dummy
11: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 4e:3b:d3:6c:f0:e6 brd ff:ff:ff:ff:ff:ff
12: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group test qlen 1000
link/ether d6:9c:a4:1f:e7:e5 brd ff:ff:ff:ff:ff:ff
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
This work moves the bpf loader into the iproute2 library and reworks
the tc specific parts into generic code. It's useful as we can then
more easily support new program types by just having the same ELF
loader backend. Joint work with Thomas Graf. I hacked a rough start
of a test suite to make sure nothing breaks [1] and looks all good.
[1] https://github.com/borkmann/clsact/blob/master/test_bpf.sh
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Both types have been missing here and thus ip always showed
only the numbers.
Based on a suggestion from Alexander Aring.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
All users of genl have the same code to open a genl socket and resolve
the family for their specific protocol. Introduce a helper to initialize
the handle, and use it in all the genl code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
This only replaces occurrences where the newly allocated memory is
cleared completely afterwards, as in other cases it is a theoretical
performance hit although code would be cleaner this way.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Top level can be any json type and can be created using
jsonw_start_object/jsonw_end_object etc.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
strtoul() only modifies errno on overflow, so if errno is not zero
before calling the function its value is preserved and makes the
function fail for valid inputs; initialize it.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Similar to the Linux kernel and perf add infrastructure to reduce the
amount of output tossed to a user during a build. Full build output
can be obtained with 'make V=1'
Builds go from:
make[1]: Leaving directory `/home/dsa/iproute2.git/lib'
make[1]: Entering directory `/home/dsa/iproute2.git/ip'
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ip.o ip.c
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ipaddress.o ipaddress.c
to:
...
AR libutil.a
ip
CC ip.o
CC ipaddress.o
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Kernel gained support for filtering link dumps with commit dc599f76c22b
("net: Add support for filtering link dump by master device and kind").
Add support to ip link command. If a user passes master device or
kind to ip link command they are added to the link dump request message.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
An attempt to add invalid address to interface would print "???" string
instead of the address family name.
For example:
$ ip address add 256.10.166.1/24 dev ens8
Error: ??? prefix is expected rather than "256.10.166.1/24".
$ ip neighbor add proxy 2001:db8::g dev ens8
Error: ??? address is expected rather than "2001:db8::g".
With this patch the output will look like:
$ ip address add 256.10.166.1/24 dev ens8
Error: inet prefix is expected rather than "256.10.166.1/24".
$ ip neighbor add proxy 2001:db8::g dev ens8
Error: inet6 address is expected rather than "2001:db8::g".
Signed-off-by: Przemyslaw Szczerbik <przemyslawx.szczerbik@intel.com>
Signed-off-by: Marco Varlese <marco.varlese@intel.com>
David Ahern
Daniel Borkmann
Petr Vorel
Stephen Hemminger
Jamal Hadi Salim
Thomas Graf
Cyrill Gorcunov
Stephen Hemminger
Zhang Shengju
stefan@datenfreihafen.org
Igor Ryzhov
Nikolay Aleksandrov
Sabrina Dubroca
Phil Sutter
Anuradha Karuppiah
Eli Cohen
Beniamino Galvani
Jiri Pirko
Marco Varlese