Presently, if a Geneve or VXLAN interface was created with 'external',
it's not possible for a user to determine e.g. the value of 'dstport'
after creation. This change fixes that by avoiding early returns.
This change partly reverts commit 00ff4b8e31 ("ip/tunnel: Be consistent
when printing tunnel collect metadata").
Signed-off-by: Ilya Dmitrichenko <errordeveloper@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch addresses Stephen's comment:
"""
> + print_null(PRINT_ANY, "", "\n", NULL);
Use print_nl() since it handles the case of oneline output.
Plus in JSON the newline is meaningless.
"""
It also removes two useless print_null's.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides support for adding, listing and removing IOAM namespaces
and schemas with iproute2. When adding an IOAM namespace, both "data" (=u32)
and "wide" (=u64) are optional. Therefore, you can either have none, one of
them, or both at the same time. When adding an IOAM schema, there is no
restriction on "DATA" except its size (see IOAM6_MAX_SCHEMA_DATA_LEN). By
default, an IOAM namespace has no active IOAM schema (meaning an IOAM namespace
is not linked to an IOAM schema), and an IOAM schema is not considered
as "active" (meaning an IOAM schema is not linked to an IOAM namespace). It is
possible to link an IOAM namespace with an IOAM schema, thanks to the last
command below (meaning the IOAM schema will be considered as "active" for the
specific IOAM namespace).
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Make use of the already available brief flag and print the basic details of
the IPv4 or IPv6 neighbour cache in a tabular format for better readability
when the brief output is expected.
$ ip -br neigh
172.16.12.100 bridge0 b0:fc:36:2f:07:43
172.16.12.174 bridge0 8c:16:45:2f:bc:1c
172.16.12.250 bridge0 04:d9:f5:c1:0c:74
fe80::267b:9f70:745e:d54d bridge0 b0:fc:36:2f:07:43
fd16:a115:6a62:0:8744:efa1:9933:2c4c bridge0 8c:16:45:2f:bc:1c
fe80::6d9:f5ff:fec1:c74 bridge0 04:d9:f5:c1:0c:74
And add "ip neigh show" to the list of ip sub commands mentioned in the man
page that support the brief output in tabular format.
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add arp_validate filter support based on kernel commit 896149ff1b2c
("bonding: extend arp_validate to be able to receive unvalidated arp-only traffic")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We started to use in-kernel filtering feature which allows to get only
needed tables (see iproute_dump_filter()). From the kernel side it's
implemented in net/ipv4/fib_frontend.c (inet_dump_fib), net/ipv6/ip6_fib.c
(inet6_dump_fib). The problem here is that behaviour of "ip route save"
was changed after
c7e6371bc ("ip route: Add protocol, table id and device to dump request").
If filters are used, then kernel returns ENOENT error if requested table
is absent, but in newly created net namespace even RT_TABLE_MAIN table
doesn't exist. It is really allocated, for instance, after issuing
"ip l set lo up".
Reproducer is fairly simple:
$ unshare -n ip route save > dump
Error: ipv4: FIB table does not exist.
Dump terminated
Expected result here is to get empty dump file (as it was before this
change).
v2: reworked, so, now it takes into account NLMSGERR_ATTR_MSG
(see nl_dump_ext_ack_done() function). We want to suppress error messages
in stderr about absent FIB table from kernel too.
v3: reworked to make code clearer. Introduced rtnl_suppressed_errors(),
rtnl_suppress_error() helpers. User may suppress up to 3 errors (may be
easily extended by changing SUPPRESS_ERRORS_INIT macro).
v4: reworked, rtnl_dump_filter_errhndlr() was introduced. Thanks
to Stephen Hemminger for comments and suggestions
v5: space fixes, commit message reformat, empty initializers
Fixes: c7e6371bc ("ip route: Add protocol, table id and device to dump request")
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The WWAN subsystem has been extended to generalize the per data channel
network interfaces management. This change implements support for WWAN
links handling. And actively uses the earlier introduced ip-link
capability to specify the parent by its device name.
The WWAN interface for a new data channel should be created with a
command like this:
ip link add dev wwan0-2 parentdev wwan0 type wwan linkid 2
Where: wwan0 is the modem HW device name (should be taken from
/sys/class/wwan) and linkid is an identifier of the opened data
channel.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for specifying a parent device (struct device) by its name
during the link creation and printing parent name in the links list.
This option will be used to create WWAN links and possibly by other
device classes that do not have a "natural parent netdev".
Add the parent device bus name printing for links list info
completeness. But do not add a corresponding command line argument, as
we do not have a use case for this attribute.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
We introduce the new "End.DT46" action for supporting the SRv6 End.DT46
Behavior in iproute2.
The SRv6 End.DT46 Behavior, defined in RFC 8986 [1] section 4.8, can be
used to implement L3 VPNs based on Segment Routing over IPv6 networks in
multi-tenants environments and it is capable of handling both IPv4 and
IPv6 tenant traffic at the same time.
The SRv6 End.DT46 Behavior decapsulates the received packets and it
performs the IPv4 or IPv6 routing lookup in the routing table of the
tenant.
As for the End.DT4 and for the End.DT6 in VRF mode, the SRv6 End.DT46
Behavior leverages a VRF device in order to force the routing lookup into
the associated routing table using the "vrftable" attribute.
To make the End.DT46 work properly, it must be guaranteed that the
routing table used for routing lookup operations is bound to one and
only one VRF during the tunnel creation. Such constraint has to be
enforced by enabling the VRF strict_mode sysctl parameter, i.e.:
$ sysctl -wq net.vrf.strict_mode=1
Note that the same approach is used for the End.DT4 Behavior and for the
End.DT6 Behavior in VRF mode.
An SRv6 End.DT46 Behavior instance can be created as follows:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100
Standard Output:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100 metric 1024 pref medium
JSON Output:
$ ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6local",
"action": "End.DT46",
"vrftable": 100,
"dev": "vrf100",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
This patch updates the route.8 man page and the ip route help with the
information related to End.DT46.
Considering that the same information was missing for the SRv6 End.DT4 and
the End.DT6 Behaviors, we have also added it.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
We introduce the "count" optional attribute for supporting counters in SRv6
Behaviors as defined in [1], section 6. For each SRv6 Behavior instance,
counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, we introduce a new counter that counts the number of packets
that have NOT been properly processed (i.e. errors) by an SRv6 Behavior
instance.
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters specifing the "count" attribute as follows:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
v2:
- add help and route.8 man page updates
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
When add address with port, it is mean to send an ADD_ADDR to remote,
so it must have flag signal set.
Fixes: 42fbca91cd ("mptcp: add support for port based endpoint")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.
This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.
Signed-off-by: Jethro Beekman <kernel@jbeekman.nl>
Signed-off-by: David Ahern <dsahern@kernel.org>
In functions netns_pids() and netns_identify_pid(), the netns file is
not closed on some error paths.
Fix this using a conditional close and a single return point on both
functions.
Fixes: 44b563269e ("ip-nexthop: support flush by id")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The 'ip' utility hardcodes the assumption of being a 2-char command, where
any follow-on characters are passed as an argument:
$ ./ip-full help
Object "-full" is unknown, try "ip help".
This confusing behaviour isn't seen with 'tc' for example, and was added in
a 2005 commit without documentation. It was noticed during testing of 'ip'
variants built/packaged with different feature sets (e.g. w/o BPF support).
Mitigate the problem by redoing the command without the 2-char assumption
if the follow-on characters fail to parse as a valid command.
Fixes: 351efcde4e ("Update header files to 2.6.14")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The function get_task_name() is used to get the name of a process from
its pid, and its implementation is similar to ip/iptuntap.c:pid_name().
Move it to lib/fs.c to use a single implementation and make it easily
reusable.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This adds iproute2 support for mptcp event monitoring, e.g. creation,
establishment, address announcements from the peer, subflow establishment
and so on.
While the kernel-generated events are primarily aimed at mptcpd (e.g. for
subflow management), this is also useful for debugging.
This adds print support for the existing events.
Sample output of 'ip mptcp monitor':
[ CREATED] token=83f3a692 remid=0 locid=0 saddr4=10.0.1.2 daddr4=10.0.1.1 sport=58710 dport=10011
[ ESTABLISHED] token=83f3a692 remid=0 locid=0 saddr4=10.0.1.2 daddr4=10.0.1.1 sport=58710 dport=10011
[SF_ESTABLISHED] token=83f3a692 remid=0 locid=1 saddr4=10.0.2.2 daddr4=10.0.1.1 sport=40195 dport=10011 backup=0
[ CLOSED] token=83f3a692
Signed-off-by: Florian Westphal <fw@strlen.de>
grps is dinamically allocated with a calloc, and not freed in a return
path in the for cycle. This commit fix it.
While at it, make the function use a single return point.
Fixes: 63df8e8543 ("Add support for nexthop objects")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The format for erspan/erspan6 output is not valid JSON, as on version 2 a
valueless key was presented. The direction should be value and erspan_dir
should be the key.
Fixes: 2897636267 ("erspan: add erspan version II support")
Cc: u9012063@gmail.com
Reported-by: Christian Pössinger <christian@poessinger.com>
Signed-off-by: Christian Pössinger <christian@poessinger.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
since id is unique for nexthop, it is heavy to dump all nexthops.
use existing delete_nexthop to support flush by id
Signed-off-by: Chunmei Xu <xuchunmei@linux.alibaba.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
After the comment cited below, batch mode neglects to set the global
variable batch_mode to a non-zero value. Netns and VRF commands use this
variable, and break in batch mode. Fix by setting the value again.
Fixes: 1d9a81b8c9 ("Unify batch processing across tools")
Reported-by: Tim Rice <trice@posteo.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for setting and displaying the Traffic Flow
Confidentiality attribute for an XFRM state, which allows padding ESP
packets to a specified length.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add ability to dump multiple nexthop buckets and get a specific one.
Example:
# ip nexthop add id 10 group 1/2 type resilient buckets 8
# ip nexthop
id 1 via 192.0.2.2 dev dummy10 scope link
id 2 via 192.0.2.19 dev dummy20 scope link
id 10 group 1/2 type resilient buckets 8 idle_timer 120 unbalanced_timer 0 unbalanced_time 0
# ip nexthop bucket
id 10 index 0 idle_time 28.1 nhid 2
id 10 index 1 idle_time 28.1 nhid 2
id 10 index 2 idle_time 28.1 nhid 2
id 10 index 3 idle_time 28.1 nhid 2
id 10 index 4 idle_time 28.1 nhid 1
id 10 index 5 idle_time 28.1 nhid 1
id 10 index 6 idle_time 28.1 nhid 1
id 10 index 7 idle_time 28.1 nhid 1
# ip nexthop bucket show nhid 1
id 10 index 4 idle_time 53.59 nhid 1
id 10 index 5 idle_time 53.59 nhid 1
id 10 index 6 idle_time 53.59 nhid 1
id 10 index 7 idle_time 53.59 nhid 1
# ip nexthop bucket get id 10 index 5
id 10 index 5 idle_time 81 nhid 1
# ip -j -p nexthop bucket get id 10 index 5
[ {
"id": 10,
"bucket": {
"index": 5,
"idle_time": 104.89,
"nhid": 1
},
"flags": [ ]
} ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add ability to configure resilient nexthop groups and show their current
configuration. Example:
# ip nexthop add id 10 group 1/2 type resilient buckets 8
# ip nexthop show id 10
id 10 group 1/2 type resilient buckets 8 idle_timer 120 unbalanced_timer 0
# ip -j -p nexthop show id 10
[ {
"id": 10,
"group": [ {
"id": 1
},{
"id": 2
} ],
"type": "resilient",
"resilient_args": {
"buckets": 8,
"idle_timer": 120,
"unbalanced_timer": 0
},
"flags": [ ]
} ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Next patches are going to add a 'resilient' nexthop group type, so allow
users to specify the type using the 'type' argument. Currently, only
'mpath' type is supported.
These two commands are equivalent:
# ip nexthop add id 10 group 1/2/3
# ip nexthop add id 10 group 1/2/3 type mpath
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
NH ID extraction is a common operation, and will become more common still
with the resilient NH groups support. Add a helper that does what it
usually done and returns the parsed NH ID.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Security context names are not guaranteed to be NUL-terminated by the
kernel, so we can't just print them using %s directly. The length of
the string is determined by sctx->ctx_len, so we can use that to limit
what fprintf outputs.
While at it, factor that out to a separate function, since the exact
same code is used to print the security context for both policies and
states.
Fixes: b2bb289a57 ("xfrm security context support")
Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
format_host_rta_r might return a cached hostname
via its return value and not use the input buffer.
Before:
$ ip -resolve -6 route
dev lo proto kernel metric 256 pref medium
After:
$ ip/ip -resolve -6 route
localhost dev lo proto kernel metric 256 pref medium
Bug-Debian: https://bugs.debian.org/983591
Reported-by: Axel Scheepers <axel.scheepers76@gmail.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The feature is supported by the kernel since 5.11-net-next,
let's allow user-space to use it.
Just parse and dump an additional, per endpoint, u16 attribute
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
When table and vrftable are used in SRv6, ip should bail out if table
ids are not valid, and return a proper error message to the user.
Achieve this simply checking rtnl_rttable_a2n return value, as we
already do in the rest of iproute.
Fixes: 0486388a87 ("add support for table name in SRv6 End.DT* behaviors")
Fixes: 69629b4e43 ("seg6: add support for vrftable attribute in SRv6 End.DT4/DT6 behaviors")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The kernel signals when offload fails using the 'RTM_F_OFFLOAD_FAILED'
flag. Print it to help users understand the offload state of the route.
The "rt_" prefix is used in order to distinguish it from the offload state
of nexthops, similar to "rt_offload" and "rt_trap".
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Since NETLINK_GET_STRICT_CHK was enabled, the kernel rejects commands
that pass a prefix length, eg:
ip route get `1.0.0.0/1
Error: ipv4: Invalid values in header for route get request.
ip route get 0.0.0.0/0
Error: ipv4: rtm_src_len and rtm_dst_len must be 32 for IPv4
Since there's no point in setting a rtm_dst_len that we know is going
to be rejected, just force it to the right value if it's passed on
the command line. Print a warning to stderr to notify users.
Bug-Debian: https://bugs.debian.org/944730
Reported-By: Clément 'wxcafé' Hertling <wxcafe@wxcafe.net>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The kernel might truncate VF info in IFLA_VFINFO_LIST. Compare the
expected number of VFs in IFLA_NUM_VF to how many were found in the
list and warn accordingly.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
* Fix PROTO description in help message (mpls isn't a valid argument).
* Remove SRCPORTMIN description from help message since it doesn't
appear in the syntax string.
* Use same keywords in help message and in man page.
* Use the "ethertype" option name (.B ethertype) rather than the
option value (.I ETHERTYPE) in the man page description of
[no]multiproto.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The len8_dlc element is filled by the CAN interface driver and used for CAN
frame creation by the CAN driver when the CAN_CTRLMODE_CC_LEN8_DLC flag is
supported by the driver and enabled via netlink configuration interface.
Add the command line support for cc-len8-dlc for Linux 5.11+
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
Necessary to understand what is going on when bpf_program_load fails
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before:
# ip nexthop help
Usage: ip nexthop { list | flush } [ protocol ID ] SELECTOR
ip nexthop { add | replace } id ID NH [ protocol ID ]
ip nexthop { get| del } id ID
SELECTOR := [ id ID ] [ dev DEV ] [ vrf NAME ] [ master DEV ]
[ groups ] [ fdb ]
NH := { blackhole | [ via ADDRESS ] [ dev DEV ] [ onlink ]
[ encap ENCAPTYPE ENCAPHDR ] | group GROUP ] }
GROUP := [ id[,weight]>/<id[,weight]>/... ]
ENCAPTYPE := [ mpls ]
ENCAPHDR := [ MPLSLABEL ]
After:
# ip nexthop help
Usage: ip nexthop { list | flush } [ protocol ID ] SELECTOR
ip nexthop { add | replace } id ID NH [ protocol ID ]
ip nexthop { get | del } id ID
SELECTOR := [ id ID ] [ dev DEV ] [ vrf NAME ] [ master DEV ]
[ groups ] [ fdb ]
NH := { blackhole | [ via ADDRESS ] [ dev DEV ] [ onlink ]
[ encap ENCAPTYPE ENCAPHDR ] | group GROUP [ fdb ] }
GROUP := [ <id[,weight]>/<id[,weight]>/... ]
ENCAPTYPE := [ mpls ]
ENCAPHDR := [ MPLSLABEL ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch allows the user to set and retrieve the
IFLA_MACVLAN_BC_QUEUE_LEN parameter via the bcqueuelen
command line argument
This parameter controls the requested size of the queue for
broadcast and multicast packages in the macvlan driver.
If not specified, the driver default (1000) will be used.
Note: The request is per macvlan but the actually used queue
length per port is the maximum of any request to any macvlan
connected to the same port.
For this reason, the used queue length IFLA_MACVLAN_BC_QUEUE_LEN_USED
is also retrieved and displayed in order to aid in the understanding
of the setting. However, it can of course not be directly set.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Signed-off-by: David Ahern <dsahern@gmail.com>
The tools "ip" and "tc" use a flag "use_iec", which indicates whether, when
formatting rate values, the prefixes "K", "M", etc. should refer to powers
of 1024, or powers of 1000. The flag is currently kept as a global variable
in "ip" and "tc", but is nonetheless declared in util.h.
Instead, move the declaration to tool-specific headers ip/ip_common.h and
tc/tc_common.h.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ilya Dmitrichenko
Justin Iurman
Gokul Sivakumar
Hangbin Liu
Alexander Mikhalitsyn
Sergey Ryazanov
Paolo Lungaroni
Jakub Kicinski
Jianguo Wu
David Ahern
Jethro Beekman
Stephen Hemminger
Andrea Claudi
Tony Ambardar
Florian Westphal
Chunmei Xu
Petr Machata
Sabrina Dubroca
Ido Schimmel
Luca Boccassi
Paolo Abeni
Amit Cohen
Edwin Peer
Guillaume Nault
Oliver Hartkopp
Jarod Wilson
Thomas Karlsson
Petr Machata