Get rid of code duplications and consolidate encapsulation
options printing in single function - tnl_print_encap().
Introduce and use tnl_encap_str() to format encapsulation
option string according to tempate and given values to avoid
code duplication and simplify it.
Use print_string() instead of fputs() and fprintf() to
print encapsulation for !is_json_context().
Print "unknown" parameter for "encap" type in PRINT_FP
context using "%s " format specifier and benefit from
complite time string merge.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need for custom SPRINT_BUF() and snprintf() 0x%x
value to this buffer: we can use print_0xhex() instead
of print_string().
In link_iptnl.c use s2 instead of s1 buffer and remove
s1.
While there adjust fwmark option print order in iptnl
and ip6tnl to get it match each other.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both ttl/hoplimit is from 1 to 255. Zero has special meaning:
use encapsulated packet value. In ip-link(8) -d output this
looks like "ttl/hoplimit inherit". In JSON we have "int" type
for ttl and therefore values from 0 (inherit) to 255.
To do the best in handling ttl/hoplimit we need to accept
both cases: missing attribute in netlink dump and zero value
for "inherit"ed case. Last one is broken since JSON output
introduction for gre/iptnl versions and was never true for
gre6/ip6tnl.
For all tunnels, except ip6tnl change JSON type from "int" to
"uint" to reflect true nature of the ttl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To follow gre6 output print hoplimit before encapsulation
limit in link_ip6tnl.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use %u format specifier to print it in link_gre6.c and
make code more readable.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
flowlabel and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
Omit flowlabel from output if no flowinfo attribute
is given and IP6_TNL_F_USE_ORIG_FLOWLABEL isn't set.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
tclass and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
While there use __u32 for flowinfo in link_gre6.c
and check for IFLA_GRE_FLOWINFO attribute presense.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is implementation internal and main purpose
of printing it seems debugging.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In link_gre6.c it seems copy paste error: tclass is 8 bits,
not 20 as flowlabel.
In link_iptnl.c rename "flowinfo_tclass" to "tclass" as it
correct name since flowinfo is implementation internal name
used to label combined within u32 attribute tclass and
flowlabel.
Fixes: 1facc1c61c ("ip: link_ip6tnl.c: add json output support")
Fixes: 2e706e12d9 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We must clear bit, not set all but given bit.
Fixes: 858dbb208e ("ip link: Add support for remote checksum offload to IP tunnels")
Fixes: 73516e128a ("ip6tnl: Support for fou encapsulation"
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Since rtnl_talk() never returns with answer buffer allocated
on error we do not need to release it manually. After this
initializing answer with NULL before rtnl_talk() is useless.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Use specialized helper to initialize endpoint addresses with
zeros instead of open coding this. This unifies initialization
style with other ipv6 tunnel variants (i.e. gre6 and vti6).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Manual page ip-link(8) states that both local and remote accept
IPADDR not PREFIX. Use get_addr() instead of get_prefix() to
parse local/remote endpoint address correctly.
Force corresponding address family instead of using preferred_family
to catch weired cases as shown below.
Before this patch it is possible to create tunnel with commands:
ip li add dev ip6gre2 type ip6gre local fe80::1/64 remote fe80::2/64
ip -4 li add dev ip6gre2 type ip6gre local 10.0.0.1/24 remote 10.0.0.2/24
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Recently `external` support was added to the tunnel drivers, but there is no way
to introspect this from userspace. This adds support for that.
Now `ip -details link` shows it:
```
7: tunl60@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group
default qlen 1
link/tunnel6 :: brd :: promiscuity 0
ip6tnl external any remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Signed-off-by: Phil Dibowitz <phil@ipom.com>
IP6_TNL_F_ALLOW_LOCAL_REMOTE allows tunnel traffic on ip6tnl devices
where the remote endpoint is a local host address.
Specifying "[no]allow-localremote" controls the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on ip6tnl interfaces.
This is the user-space counterpart for kernel
commit 908d140a87a7 ("ip6_tunnel: Allow rcv/xmit even if remote address is a local address")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
This attribute allows the administrator to adjust the packet marking
attribute of tunnels that support policy based routing.
Signed-off-by: Craig Gallek <kraig@google.com>
Take help function in iplink_bridge.c as an example and make other link
types' help functions similar:
* Use a single fprintf() call (if possible).
* Don't state a full command line, just "... type OPTIONS".
* Put every option in it's own line, align options by column.
* List mandatory options first.
link_veth.c is intentionally left untouched because it's 'peer' option
eats all kinds of generic link options and the help text points this out
without duplicating all the options there again.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
For some address families (like AF_PACKET) it is helpful to have the
length when prenting the address.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Allow to print particular link type usage by:
ip link help [TYPE]
Currently to print usage for some link type it is needed
to use the following way:
ip link { add | del | set } type TYPE help
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Serhey Popovych
Phil Dibowitz
Shmulik Ladkani
Hangbin Liu
Julien Fortin
Craig Gallek
Phil Sutter
Alexei Starovoitov
Tom Herbert
Stephen Hemminger
Stephen Hemminger
Eric W. Biederman
vadimk
Nicolas Dichtel