The command "ip mroute show" is not showing routes when "to" and/or "from"
filter is applied.
root@mazhar:~# ip mroute show
(10.202.30.101, 235.1.2.3) Iif: eth0 Oifs: eth1
But When I applied filter, it does not show anything.
root@mazhar:~# ip mroute show 235.1.2.3 from 10.202.30.101
root@mazhar:~#
Signed-off-by: Mazhar Rana <ranamazharp@gmail.com>
If a tunnel is created with a local address, you can't change it to any.
# ip tunnel add tunl1 mode ipip remote 10.16.42.37 local 10.16.42.214 ttl 64
# ip tunnel show tunl1
tunl1: ip/ip remote 10.16.42.37 local 10.16.42.214 ttl 64
# ip tunnel change tunl1 local any
# echo $?
0
# ip tunnel show tunl1
tunl1: ip/ip remote 10.16.42.37 local 10.16.42.214 ttl 64
It happens that parse_args zeroes ip_tunnel_parm, and when creating the
tunnel, it is OK to leave it as is if the address is any. However, when
changing the tunnel, the current parameters will be read from
ip_tunnel_parm, and local and remote address won't be zeroes anymore, so
it needs to be explicitly set to any.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
If ip rule command fails talking to kernel, exit code should be 2.
The sub-command is called by cmd loop and the exit code is negative
of return value from the command callback.
If kernel complains about ip route request, exit status should be
2 not 1.
This fixes regression introduced by:
commit 42ecedd4ba
Author: Roopa Prabhu <roopa@cumulusnetworks.com>
Date: Tue Mar 17 19:26:32 2015 -0700
fix ip -force -batch to continue on errors
Add a new option to toggle the ability of querying the RSS configuration of a specific VF.
VF RSS information like RSS hash key may be considered sensitive on some devices where
this information is shared between VF and PF and thus its querying may be prohibited by default.
This new option allows a system administrator with privileges to modify a PF state
to control if the above VF querying is allowed or not.
For example:
To enable RSS querying of VF[0] of ethX:
>> ip link set dev ethX vf 0 query_rss on
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Show deleting by group in 'ip link help' output:
...
ip link delete { DEVICE | dev DEVICE | group DEVGROUP } type TYPE [ ARGS ]
...
Also show separately DEVICE option in { } list.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
It is hard to quickly find what you are looking for in the output of the
ip command. Color helps.
This patch adds a '-c' flag to highlight these with individual colors:
- interface name
- ip address
- mac address
- up/down state
Signed-off-by: Mathias Nyman <m.nyman@iki.fi>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
This flag is only for the netlink protocol (multi-part messages), no reason
to reject messages without it.
Note that this flag was removed by the following kernel patches (v3.14)
65886f439ab0 ipmr: fix mfc notification flags
f518338b1603 ip6mr: fix mfc notification flags
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
XFRM netlink family is independent from the route netlink family. It's wrong
to call rtnl_wilddump_request(), because it will add a 'struct ifinfomsg' into
the header and the kernel will complain (at least for xfrm state):
netlink: 24 bytes leftover after parsing attributes in process `ip'.
Reported-by: Gregory Hoggarth <Gregory.Hoggarth@alliedtelesis.co.nz>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Two commands are added:
- ip netns list-id
- ip monitor nsid
A cache is also added to remember the association between the iproute2 netns
name (from /var/run/netns/) and the nsid.
To avoid interfering with the rth socket, a new rtnl socket (rtnsh) is used to
get nsid (we may send rtnl request during listing on rth).
Example:
$ ip netns list-id
nsid 0 (iproute2 netns name: foo)
$ ip monitor nsid
Deleted nsid 0 (iproute2 netns name: foo)
nsid 16 (iproute2 netns name: bar)
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
When creating an IPsec SA that sets 'proto any' (IPPROTO_IP) and
specifies 'sport' and 'dport' at the same time in selector, the
following error is issued:
"sport" and "dport" are invalid with proto=ip
However using IPPROTO_IP with ports is completely legal and necessary
when one wants to share the SA on both TCP and UDP. One of the
applications requiring sharing SAs is 3GPP IMS AKA authentication.
See also:
* https://bugzilla.redhat.com/show_bug.cgi?id=497355
Reported-by: Jiří Klimeš <jklimes@redhat.com>
Signed-off-by: Pavel Šimerda <psimerda@redhat.com>
The kernel now has the capability to offload FDB and FIB entries to hardware.
It is important to let users know if table entries are also offloaded to
hardware. Currently offloaded FDB entries are indicated by the existence of
the flag 'external' on the entry as of the following commit:
commit 28467b7f3f
Author: Scott Feldman <sfeldma@gmail.com>
Date: Thu Dec 4 09:57:15 2014 +0100
bridge/fdb: add flag/indication for FDB entry synced from offload device
When the patch to add support for indicating that FIB entries were also
offloaded as posted to netdev by Scott Feldman it became clear that 'external'
would not be an ideal name for routes. There could definitely be confusion
about what this might mean since many routes are to external networks -- a
collision/confusion that did not happen with FDB.
Scott Feldman asked me to check with others and build concensus around a name.
After speaking with several people about this I am proposing we refer to both
FDB and FIB entries that are currently backed by hardware (based on the work
done in rocker) with the flag 'offload' appended to the end ofthe entry.
Some people liked the string 'external,' others liked 'hardware,' but the point
is to communicate that these routes are available to something that will will
offload the forwarding normally done by the kernel. Since the term 'offload'
is used so frequently it seems appropriate to use the same language in
ip/bridge output.
The term 'offload' also seems to resonate with many of the people who have
responded on Scott's original thread or to those who I reached out to directly
and did respond to my query, so it seems we have reached consensus that it
should be the term used going forward.
v2: rebased against net-next branch
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: John W. Linville <linville@tuxdriver.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Scott Feldman <sfeldma@gmail.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
The goal of this patch is to test during the runtime if the command RTM_GETNSID
is supported by the kernel.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
add a new command to configure the SPD hash table:
ip xfrm policy set [ hthresh4 LBITS RBITS ] [ hthresh6 LBITS RBITS ]
and code to display the SPD hash configuration:
ip -s -s xfrm policy count
hthresh4: defines minimum local and remote IPv4 prefix lengths of
selectors to hash a policy. If prefix lengths are greater or equal
to the thresholds, then the policy is hashed, otherwise it falls back
in the policy_inexact chained list.
hthresh6: defines minimum local and remote IPv6 prefix lengths of
selectors to hash a policy, otherwise it falls back
in the policy_inexact chained list.
Example:
% ip -s -s xfrm policy count
SPD IN 0 OUT 0 FWD 0 (Sock: IN 0 OUT 0 FWD 0)
SPD buckets: count 7 Max 1048576
SPD IPv4 thresholds: local 32 remote 32
SPD IPv6 thresholds: local 128 remote 128
% ip xfrm pol set hthresh4 24 16 hthresh6 64 56
% ip -s -s xfrm policy count
SPD IN 0 OUT 0 FWD 0 (Sock: IN 0 OUT 0 FWD 0)
SPD buckets: count 7 Max 1048576
SPD IPv4 thresholds: local 24 remote 16
SPD IPv6 thresholds: local 64 remote 56
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
This allows querying and setting the route preference. It's usually set from
the IPv6 Neighbor Discovery Router Advertisement messages.
Introduced in "ipv6: expose RFC4191 route preference via rtnetlink", enqueued
for Linux 4.1.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
- Pull in the uapi mpls.h
- Update rtnetlink.h to include the mpls rtnetlink notification multicast group.
- Define AF_MPLS in utils.h if it is not defined from elsewhere
as is done with AF_DECnet
The address syntax for multiple mpls labels is a complete invention.
When I looked there seemed to be no wide spread convention for talking
about an mpls label stack in text for. Sometimes people did:
"{ Label1, Label2, Label3 }", sometimes people would do:
"[ label3, label2, label1 ]", and most of the time label
stacks were not explicitly shown at all.
The syntax I wound up using, so it would not have spaces and so it
would visually distinct from other kinds of addresses is.
label1/label2/label3 Where label1 is the label at the top of the label
stack and label3 is the label at the bottom on the label stack.
When there is a single label this matches what seems to be convention
with other tools. Just print out the numeric value of the mpls label.
The netlink protocol for labels uses the on the wire format for a
label stack. The ttl and traffic class are expected to be 0. Using
the on the wire format is common and what happens with other address
types. BGP when passing label stacks also uses this technique with the
exception that the ttl byte is not included making each label in a BGP
label stack 3 bytes instead of 4.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This attribute is like RTA_DST except it specifies the destination
address to place on a packet when it leaves the host. For ip based
protocols this is destination NAT and not a common part of forwarding.
For protocols like MPLS label swapping is something that typically
happens on every hop.
There is likely to be a RTA_NEWSRC at some point so RTA_NEWDST
is printed as "as to" and can be specified either as "as to"
or just "as"
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add support for the RTA_VIA attribute that specifies an address family
as well as an address for the next hop gateway.
To make it easy to pass this reorder inet_prefix so that it's tail
is a proper RTA_VIA attribute.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add the functions family_name and read_family to convert an address
family to a string and to convernt a string to an address family.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For some address families (like AF_PACKET) it is helpful to have the
length when prenting the address.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Joining multicast group on ethernet level via "ip maddr" command would
not work if we have an Ethernet switch that does igmp snooping since
the switch would not replicate multicast packets on ports that did not
have IGMP reports for the multicast addresses.
Linux vxlan interfaces created via "ip link add vxlan" have the group option
that enables then to do the required join.
By extending ip address command with option "autojoin" we can get similar
functionality for openvswitch vxlan interfaces as well as other tunneling
mechanisms that need to receive multicast traffic.
example:
ip address add 224.1.1.10/24 dev eth5 autojoin
ip address del 224.1.1.10/24 dev eth5
On ip route print dump, label externally offloaded routes with "external".
Offloaded routes are flagged with RTNH_F_EXTERNAL, a recent additon to
net-next. For example:
$ ip route
default via 192.168.0.2 dev eth0
11.0.0.0/30 dev swp1 proto kernel scope link src 11.0.0.2 external
11.0.0.4/30 via 11.0.0.1 dev swp1 proto zebra metric 20 external
11.0.0.8/30 dev swp2 proto kernel scope link src 11.0.0.10 external
11.0.0.12/30 via 11.0.0.9 dev swp2 proto zebra metric 20 external
12.0.0.2 proto zebra metric 30 external
nexthop via 11.0.0.1 dev swp1 weight 1
nexthop via 11.0.0.9 dev swp2 weight 1
12.0.0.3 via 11.0.0.1 dev swp1 proto zebra metric 20 external
12.0.0.4 via 11.0.0.9 dev swp2 proto zebra metric 20 external
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Don't insert newline in -o (oneline) mode; print mark as hex.
Oneline mode is supposed to force all output to be on oneline and
machine-parsable, but this isn't the case for "ip xfrm" as shown:
% ip -o xfrm monitor
...
src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 2051 ptype main \ mark -1879048191/0xffffffff
tmpl src 203.0.130.10 dst 198.51.130.30\ proto esp reqid 16384 mode tunnel\
...
as that's 2 lines, not one. Also, the "mark" is shown in signed
decimal, but the mask is in hex. This is confusing: let's use
hex for both.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
This patch replaces exits with returns in several
iproute2 commands. This fixes `ip -batch -force`
to not exit but continue on errors.
$cat c.txt
route del 1.2.3.0/24 dev eth0
route del 1.2.4.0/24 dev eth0
route del 1.2.5.0/24 dev eth0
route add 1.2.3.0/24 dev eth0
$ip -force -batch c.txt
RTNETLINK answers: No such process
Command failed c.txt:2
RTNETLINK answers: No such process
Command failed c.txt:3
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Where used in the ip tool, the 'show' option always has the synonyms
'list' and 'lst', except for ip-token and ip-addrlabel, which are missing
'lst'. Add this as a synonym for these commands.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Observed on the Linux 3.18:
# ip netns
RTNETLINK answers: Operation not supported
net0
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: d182ee1307 ("ipnetns: allow to get and set netns ids")
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This new attribute is now advertised by the kernel for x-netns interfaces.
It's also possible to set it when an interface is created (and thus creating a
x-netns interface with one single message).
Example:
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 15
$ ip -n foo link add ipip1 link-netnsid 15 type ipip remote 10.16.0.121 local 10.16.0.249
$ ip -n foo link ls ipip1
3: ipip1@NONE: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default
link/ipip 10.16.0.249 peer 10.16.0.121 link-netnsid 15
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The kernel now provides ids for peer netns. This patch implements a new command
'set' to assign an id.
When netns are listed, if an id is assigned, it is now displayed.
Example:
$ ip netns add foo
$ ip netns set foo 1
$ ip netns
foo (id: 1)
init_net
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch adds support to remote checksum checksum offload
confinguration for IPIP, SIT, and GRE tunnels. This patch
adds a [no]encap-remcsum to ip link command which applicable
when configured tunnels that use GUE.
http://tools.ietf.org/html/draft-herbert-remotecsumoffload-00
Example:
ip link add name tun1 type gre remote 192.168.1.1 local 192.168.1.2 \
ttl 225 encap fou encap-sport auto encap-dport 7777 encap-csum \
encap-remcsum
This would create an GRE tunnel in GUE encapsulation where the source
port is automatically selected (based on hash of inner packet),
checksums in the encapsulating UDP header are enabled (needed.for
remote checksum offload), and remote checksum ffload is configured to
be used on the tunnel (affects TX side).
Signed-off-by: Tom Herbert <therbert@google.com>
This patch makes CAN_CTRLMODE_FD_NON_ISO netlink feature configurable.
During the CAN FD standardization process within the ISO it turned out that
the failure detection capability has to be improved.
The CAN in Automation organization (CiA) defined the already implemented CAN
FD controllers as 'non-ISO' and the upcoming improved CAN FD controllers as
'ISO' compliant. See at http://www.can-cia.com/index.php?id=1937
Starting with the - currently non-ISO - driver for M_CAN v3.0.1 introduced in
Linux 3.18 this bit needs to be propagated to userspace. In future drivers this
bit will become configurable depending on the CAN FD controllers capabilities.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
"ip addr show up" would exclude the interface (link), but include the
addresses of down interfaces (which looked like they where indented
under a different interface). This fixes the filtering.
For a full example see the original bug report at:
http://bugs.debian.org/776040
Reported-by: Paul Slootman <paul@debian.org>
CC: 776040@bugs.debian.org
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Mazhar Rana
Thadeu Lima de Souza Cascardo
Stephen Hemminger
Jetchko Jekov
Thomas Graf
Vlad Zolotarov
Vadim Kochan
Mathias Nyman
Nicolas Dichtel
Pavel Šimerda
Andy Gospodarek
Christophe Gouault
Lubomir Rintel
Eric W. Biederman
Madhu Challa
Scott Feldman
philipp@redfish-solutions.com
Roopa Prabhu
Mark Einon
Tom Herbert
Oliver Hartkopp
Andreas Henriksson