For IP-in-IP tunnels, one can specify the [no]allow-localremote command
when configuring a device. Under the hood, this flips the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
tunnels, and thus there's no way to configure the flag on these
netdevices. Therefore introduce the command to link_gre6 as well.
The original support was introduced in commit 21440d19d9
("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Instead of declaring -color and -json exclusive, ignore -color when
-json is provided. The rationale is to allow to put -color in an alias
for ip while still being able to use -json. -color is merely a
presentation suggestion and we can assume there is nothing to color in
the JSON output.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Putting whole string "master eth0" in the interface name color
is wrong and confusing. Let's just turn color off for all attributes
of device.
Fixes: d92cc2d087 ("ipaddress: ll_map: Replace ll_idx_n2a() with ll_index_to_name()")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
It shares lot of code with print_linkinfo(): drop duplicated part,
change parameters list, make it static and call from print_linkinfo()
after common path.
While there move SPRINT_BUF() to the function scope from blocks to
avoid duplication and use "%s" to print "\n" to help compiler optimize
exit for both print_linkinfo_brief() and normal paths.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is at least three places implementing same things: two in
ipaddress.c print_linkinfo() & print_linkinfo_brief() and one in
bridge/link.c.
They are diverge from each other very little: bridge/link.c does not
support JSON output at the moment and print_linkinfo_brief() does not
handle IFLA_LINK_NETNS case.
Introduce and use print_name_and_link() routine to handle name@link
output in all possible variations; respect IFLA_LINK_NETNS attribute to
handle case when link is in different namespace; use ll_idx_n2a() for
interface name instead of "<nil>" to share logic with other code (e.g.
ll_name_to_index() and ll_index_to_name()) supporting such template.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Be consistent in handling of IFLA_IFNAME attribute in all places: if
there is no attribute report bug to stderr and use ll_idx_n2a() as
last measure to get name in "if%u" format instead of "<nil>".
Use check_ifname() to validate network device name: this catches both
unexpected return from kernel and ll_idx_n2a().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Simplify calling code in ipaddr_list_flush_or_save() by introducing
intermediate variable of @struct nlmsghdr, drop duplicated code:
print_linkinfo_brief() never returns values other than <= 0 so we can
move print_selected_addrinfo() outside of each block.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There are few places to improve:
1) return -1 when entry is filtered instead of zero, which means
accept entry: ipaddress_list_flush_or_save() the only user of this
2) use ll_idx_n2a() as last resort to translate name to index for
"should never happen" cases when cache shouldn't be considered
3) replace open coded access to IFLA_IFNAME attribute data by
RTA_DATA() with rta_getattr_str()
4) simplify ifname printing since name is never NULL, thanks to (2).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is no reentrancy as well as deferred result usage for all cases
where ll_idx_n2a() being used: it is safe to use ll_index_to_name() that
internally calls ll_idx_n2a() with static buffer to hold result.
While there print master network device name using correct color.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There at least two places in ip/ipaddress.c where we match IFA_LABEL
against filter.label if that is given.
Get rid of "common" if () statement for inet_addr_match_rta() and
ifa_label_match_rta(): it is not common because first will check for
filter.pfx.family != AF_UNSPEC inside and second for filter.label being
non NULL.
This allows us to further simplify down code and prepare for
ll_idx_n2a() replacement with ll_index_to_name() without 80 columns
checkpatch notice.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit a233caa0aa ("json: make pretty printing optional") I get
following build failure:
LINK rtmon
../lib/libutil.a(json_print.o): In function `new_json_obj':
json_print.c:(.text+0x35): undefined reference to `show_pretty'
collect2: error: ld returned 1 exit status
make[1]: *** [rtmon] Error 1
make: *** [all] Error 2
It is caused by missing show_pretty variable in rtmon.
On the other hand tc/tc.c there are two distinct variables and single
matches() call that handles -pretty option thus setting show_pretty
will never happen. Note that since commit 44dcfe8201 ("Change
formatting of u32 back to default") show_pretty is used in tc/f_u32.c
so this is first place where -pretty introduced.
Furthermore other utilities like misc/ifstat.c and misc/nstat.c define
pretty variable, however only for their own purposes. They both support
JSON output and thus depend show_pretty in new_json_obj().
Assuming above use common variable to represent -pretty option, define
it in utils.c and declare in utils.h that is commonly used. Replace
show_pretty with pretty.
Fixes: a233caa0aa ("json: make pretty printing optional")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We are going to merge link_iptnl.c and link_ip6tnl.c and this is final
step to make their diffs clear and show what needs to be changed during
merge.
Note that it is safe to omit endpoint address(es) from netlink create
request as kernel is aware of such case and will use zero for that
endpoint(s).
Make sure we initialize ip6rdprefix and ip6rdrelayprefix bitlen in
link_iptnl.c only when configuring existing tunnel: if kernel does not
submit prefixlen in corresponding attributes preceeding get_addr_rta()
will set bitlen to -1 which is incorrect value.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We are going to merge link_gre.c and link_gre6.c and this is final step
to make their diffs clear and show what needs to be changed during merge.
Note that it is safe to omit endpoint address(es) from netlink create
request as kernel is aware of such case and will use zero for that
endpoint(s).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We are going to merge link_vti.c and link_vti6.c and this is final step
to make their diffs clear and show what needs to be changed during merge.
Note that it is safe to omit endpoint address(es) from netlink create
request as kernel is aware of such case and will use zero for that
endpoint(s).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Initializing @inet_prefix using C initializers or memset() seems
inefficient and unnecessary: only small part of ->data[] field will be
used to store address corresponding to ->family.
Instead initialize ->flags with zero and assume no other fields accessed
before checking corresponding bits in ->flags. For example special
helpers (e.g. is_addrtype_*()) can be used to ensure that @inet_prefix
contains valid ip or ipv6 address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON and color output formatting to ip route command.
Similar to existing address and link output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add description for -json and -pretty options.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since JSON is intended for programmatic consumption, it makes
sense for the default output format to be concise as possible.
For programmer and other uses, it is helpful to keep the pretty
whitespace format; therefore enable it with -p flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
In gre/gre6 for non-JSON output 0x%x format is used: use print_0xhex()
to get the same value for JSON.
Get rid of custom _print_hex() in bridge slave code: print_0xhex() can
be used perfectly.
Break long print_uint() with long argument list to fit into 80 columns.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Few minor changes to reduce diffs between ip and ipv6 tunnel code:
1) reduce intendation by one level when adding attributes in gre and
gre6; reorder addattr*() calls to simplify diff
2) reorder local variables definition; change their type (e.g. for
IFLA_LINK) to match ones returned by rta_getattr_*()
3) move "mode" parameter parsing in link_iptnl.c to the similar
position as in link_ip6tnl.c
4) handle "tc" as shortcut for "tclass"/"tos" in link_iptnl.c
5) add whitespace where required
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reduce diff lines between iptnl and ip6tnl help printing code.
Use @struct link_util ->id field to print correct link help: all callers
now pass this data structure to iptunnel_print_help().
Get rid of custom print_usage() and usage() functions and use
iptunnel_print_help() directly, return from function on "... type
<help|garbage>" instead of exit(2).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reduce diff lines between gre and gre6 help printing code.
Use @struct link_util ->id field to print correct link help: all callers
now pass this data structure to gre_print_help().
Get rid of custom print_usage() and usage() functions and use
gre_print_help() directly, return from function on "... type
<help|garbage>" instead of exit(2).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reduce diff lines between vti and vti6 help printing code.
Use @struct link_util ->id field to print correct link help: all callers
now pass this data structure to vti_print_help().
Get rid of custom print_usage() and usage() functions and use
vti_print_help() directly, return from function on "... type
<help|garbage>" instead of exit(2).
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
If the kernel receives a negative nsid it will automatically assign
the next available nsid. In this case alloc_netid() will set min and
max to 0 for ird_alloc(). And when max == 0 idr_alloc() will interpret
this as the maximum range, i.e. specific to nsids it will try to find
an id in the range [0,INT_MAX). This is intentionally supported in the
kernel for nsids.
Commit acbe9118ce ("ip netns: use strtol() instead of atoi()")
regressed ip netns in that respect although previously the use-case
was either accidentally supported or opaquely supported such that it
triggered the original commit. From what I can gather it went as
follows before: atoi() was called with a string indicating a negative
value which caused it to return -1 which was passed to the
kernel. Let's make it less opaque by introducing the keyword "auto":
ip netns set <netns-name> auto
will cause nsid to be set to -1 and the kernel will select an available
nsid.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Minor refactoring to move flush into separate function to improve
readability and reduce depth of nesting.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Fix checkpatch complaints about assignment in conditions.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add whitespace around operators for consistency.
Use tabs for indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
It seems bad idea to depend on sysfs being mounted and reflected to the
current network namespace. Same applies to procfs.
Instead netlink should be used to talk to the kernel and get list of
specific network devices among with their parameters.
Support for kernel netlink message filtering by passing IFLA_INFO_KIND
in RTM_GETLINK request: if kernel does not support filtering by the kind
we will check it in reply anyway. Check for ifi->ifi_type to be either
ARPHRD_NONE or ARPHRD_ETHER to seed up things a bit without kernel level
filtering.
Unfortunately tun driver does not implement dumping it's configuration
via netlink and we still need to use read_prop() which depends on sysfs
to get additional tun device information.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both tunnels use legacy /proc/net/dev interface to get tunnel device and
it's statistics. This may cause problems for cases when procfs either
not mounted or not unshare(2)d for given network namespace.
Use netlink to walk through list of tunnel devices which is network
namespace aware and provides additional information such as statistics
in the dump message.
Since both address family specific variants of do_tunnels_list() nearly
the same, except for tunnel parameters structure initialization,
matching and printing we can introduce common one in tunnel.c.
To implement address family specific parts introduce new data structure
@struct tnl_print_nlmsg_info what contains all necessary information as
well as pointers to ->init(), ->match() and ->print() callbacks.
Annotate data structures by const where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use switch () instead of if () to compare tunnel type to fit into 80
columns and make code more readable. Print "\n" using fputc().
In iptunnel.c abstract tunnel parameters matching code in iptunnel.c
into ip_tunnel_parm_match() helper to conform with ip6tunnel.c. Use
memset() to initialize @p1.
In ip6tunnel.c no need to call ll_name_to_index() with name twice: just
use found previously index. Do not initialize @p1: this is done in
ip6_tnl_parm_init().
This is to show real differences between ip and ipv6 do_tunnels_list()
implementations and prepare for upcoming unification of them.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is first step to move tunnel code to use rtnl dump interface
instead of /proc/net/dev read.
Make tnl_print_stats() to accept @struct rtnl_link_stats64 parameter,
introduce tnl_get_stats() that will parse line from /proc/net/dev into
@struct rtnl_link_stats64.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Assume all statistics in ip(8) represented either by IFLA_STATS64 or
IFLA_STATS is 64 bit. It is clean that we can store __u32 counters of
@struct rtnl_link_stats in __u64 counters in @struct rtnl_link_stats64.
New get_rtnl_link_stats_rta() follows __print_link_stats() behaviour on
handling of stats attribute: copy no more than size of data structure
and no less than attribute length zeroing rest.
Drop print_link_stats32() as it's functionality can be handled by 64bit
variant. Move code from __print_link_stats() to print_link_stats64() and
finally rename print_link_stats64() to __print_link_stats().
More users of introduced function will come in future.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
To show real differences between these two variants adjust whitespace
intendation and use print_uint() instead of print_int() as all members
in both @struct rtnl_link_stats and @struct rtnl_link_stats64 are
unsigned.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For JSON and colorization, make common code a function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make printing of multipath attributes a function to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since these fields are printed in both route and multipath case;
avoid duplicating code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make a separate function to improve readability and enable
easier JSON conversion.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make common function for decoding cacheinfo.
This code may print more info than old version in some cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Refactor to reduce size of print_route and improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both next hop and route need to decode flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
We have helper routines to support nested attribute addition into
netlink buffer: use them instead of open coding.
Use addattr_nest_compat()/addattr_nest_compat_end() where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
1) Rename @hdr parameter to @n to be coherent with rest of the parsing
code.
2) Use NLMSG_DATA() to get pointer to the data after nlmsghdr instead
of calculating it directly in ip/tunnel code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This reverts commit 63891c7013.
It seems print_linkinfo_brief() never accepts filter different than
default one and David Ahern suggests to revert it instead of making
new change that actually do revert.
Conflicts:
ip/ipaddress.c
ip/iplink.c
These are caused by JSON support addition after commit we reverting.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The JSON object name for statistics in ip link show is "stats644".
Looks like a typo, commit d0e720111a ("ip: ipaddress.c: add support
for json output") contains an example with the expected "stats64" name.
The fact that no one has noticed until now is probably an indication
that no one is using this object. Hopefully it's not too late to fix
this, although IIUC this has already been in 4.13 and 4.14 releases :S
Fixes: d0e720111a ("ip: ipaddress.c: add support for json output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce and use tnl_print_endpoint() helper to print of tunnel
endpoint address.
Note that for AF_INET and AF_INET6 inet_ntop(3) is used that may return
NULL in case of failure and while unlikely format_host_rta() might
return NULL too. Handle this case when passing local/remote to
print_string().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there remove & from inet_prefix.data when since it is array.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
There are couple of minor improvements:
1) Check erspan_ver == 2 in gre6. It still could
be 1 if erspan_idx is 0.
2) Add tunnel encapsulation attributes only when
collect metadata not in effect in gre.
3) Trivial: address checkpatch issues.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print only "external" if collect meta data attribute
is given: rest of parameters are irrelevant. This is
to follow gre6.
For both JSON and non-JSON output use "external" for
all tunnels including vxlan and geneve.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In prepare of link_vti.c and link_vti6.c merge:
1) Make @fwmark of __u32 type instead of unsigned int
in vti to match with rest tunneling code.
2) Report when unable to translate @link network device
name to index instead of silently exiting in vti6.
3) Remove newline separating local/remote attributes
from the ikey/okey in vti6 to match vti module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Handle "inherit" case properly for gre6 and ip6tnl.
Use get_u8() in gre to parse ttl/hoplimit.
Be consistent about "hlim" alias to ttl/hoplimit
support.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Few minor changes after merge of 'master' into 'net-next' branch:
1) Follow 80 line length for printing erspan_index parameter
as we did in master with commit 2a8d0f6e9c ("gre/tunnel:
Print erspan_index using print_uint()").
2) Remove remnants of encapsulation option printing: now it
is done using tnl_print_encap() helper in commit bad76e6b1f
("ip/tunnel: Abstract tunnel encapsulation options printing").
Fixes: 8c75f69411 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We return constant string from tnl_strproto(), no need
to copy it to temporary buffer and then return such
buffer as const: return constant string instead.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both of these two changes are missing for link_vti6.c:
commit 8b47135474 ("ip: link: Unify link type help functions a bit")
commit 561e650eff ("ip link: Shortify printing the usage of link type")
Replay them on link_vti6.c to bring link type help functions
inline with other tunneling code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For vti6 tunnel we print [io]key in dotted-quad notation
(ipv4 address) while in vti we do that in hex format.
For vti tunnel we print [io]key only if value is not
zero while for vti6 we miss such check.
Unify vti and vti6 tunnel [io]key output.
While here enlarge s2 buffer to the same size as in rest
of tunnel support code (64 bytes) and check return from
inet_ntop().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
One is missing in JSON output because fprintf()
is used instead of print_uint().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Get rid of code duplications and consolidate encapsulation
options printing in single function - tnl_print_encap().
Introduce and use tnl_encap_str() to format encapsulation
option string according to tempate and given values to avoid
code duplication and simplify it.
Use print_string() instead of fputs() and fprintf() to
print encapsulation for !is_json_context().
Print "unknown" parameter for "encap" type in PRINT_FP
context using "%s " format specifier and benefit from
complite time string merge.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need for custom SPRINT_BUF() and snprintf() 0x%x
value to this buffer: we can use print_0xhex() instead
of print_string().
In link_iptnl.c use s2 instead of s1 buffer and remove
s1.
While there adjust fwmark option print order in iptnl
and ip6tnl to get it match each other.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For ip tunnels tos can be 0 when not configured, 1 when
inherited from encapsulated packet and rest specifying
diffserv (rfc2474) or tos (rfc1349) bits. It is stored
in packet tos/diffserv field and returned in tos
netlink attribute to userspace.
Simplify and unify tos printing by using print_0xhex()
and print_string() instead of fprintf() to output values.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both ttl/hoplimit is from 1 to 255. Zero has special meaning:
use encapsulated packet value. In ip-link(8) -d output this
looks like "ttl/hoplimit inherit". In JSON we have "int" type
for ttl and therefore values from 0 (inherit) to 255.
To do the best in handling ttl/hoplimit we need to accept
both cases: missing attribute in netlink dump and zero value
for "inherit"ed case. Last one is broken since JSON output
introduction for gre/iptnl versions and was never true for
gre6/ip6tnl.
For all tunnels, except ip6tnl change JSON type from "int" to
"uint" to reflect true nature of the ttl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We need NEXT_ARG() to get *argv pointing to "alias"
parameter value. Overwise we get and check "alias"
string length.
Fixes: f88becf35e ("iplink: Process "alias" parameter correctly")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When using the new minimum rate API and providing only one parameter
(minimum rate/maximum rate), we query the VF min and max rate regardless
of kernel support.
This resulted in segmentation fault in ipaddr_loop_each_vf, which tries
to access NULL pointer.
This patch identifies such cases by testing the VF table for NULL
pointer in IFLA_VF_RATE, and aborts the operation.
Aborting on the first VF is valid since if the kernel does not support
the new API for the first VF, it will not support it for the other VFs
as well.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
According to the documentation (man ip-link), the minimum TXRATE should
be always <= Maximum TXRATE, but commit f89a2a05ff ("Add support to
configure SR-IOV VF minimum and maximum Tx rate through ip tool") didn't
enforce it.
Fixes: f89a2a05ff ("Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool")
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
These files are already mostly written in POSIX shell, so convert their
shebangs to /bin/sh and tweak the few bashisms in here.
URL: https://crbug.com/756559
Reported-by: Pat Erley <perley@chromium.org>
Signed-off-by: Mike Frysinger <vapier@chromium.org>
To follow gre6 output print hoplimit before encapsulation
limit in link_ip6tnl.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To follow ip6tnl output print flowlabel after tclass
in link_gre6.c.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use %u format specifier to print it in link_gre6.c and
make code more readable.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
flowlabel and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
Omit flowlabel from output if no flowinfo attribute
is given and IP6_TNL_F_USE_ORIG_FLOWLABEL isn't set.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use @s2 buffer to store string representation of
tclass and get rid of extra SPRINT_BUF(): no
need to preserve @s2 contents for later.
Use print_string(PRINT_ANY, ...) with prepared by
snprintf() string for both PRINT_JSON and PRINT_FP
cases.
While there use __u32 for flowinfo in link_gre6.c
and check for IFLA_GRE_FLOWINFO attribute presense.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is implementation internal and main purpose
of printing it seems debugging.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In link_gre6.c it seems copy paste error: tclass is 8 bits,
not 20 as flowlabel.
In link_iptnl.c rename "flowinfo_tclass" to "tclass" as it
correct name since flowinfo is implementation internal name
used to label combined within u32 attribute tclass and
flowlabel.
Fixes: 1facc1c61c ("ip: link_ip6tnl.c: add json output support")
Fixes: 2e706e12d9 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It seems missing pair of open_json_object()/close_json_object()
in iptnl implementation.
Note that we open "encap" JSON object in ip6tnl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Tunnel mode does not appear in parameters print for iptnl
supported tunnels like ipip and sit, while printed for
ip6tnl.
Print tunnel mode as "proto" field name for JSON and
without any name when printing to cli to follow ip6tnl
behaviour.
For non JSON output we have:
$ ip -d link show dev sit1
Before:
-------
17: sit1@NONE: <NOARP> mtu 1480 qdisc noop state DOWN ...
link/sit X.X.X.X brd 0.0.0.0 promiscuity 0
sit remote any local X.X.X.X ...
~~~
After:
------
17: sit1@NONE: <NOARP> mtu 1480 qdisc noop state DOWN ...
link/sit X.X.X.X brd 0.0.0.0 promiscuity 0
sit any remote any local X.X.X.X ...
^^^
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Both sit and ipip "mode" parameter handling nearly the same.
Except for sit we have "ip6ip" mode: check it only when
configuring sit.
Note that there is no need strcmp(lu->id, "ipip"): if it is
not sit it is "ipip" because we have only these two link util
defined in module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
netdevsim is a new software device for testing kernel APIs
without any hardware attached. Allow users to create such
devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Sabrina Dubroca
Petr Machata
Vincent Bernat
David Ahern
Stephen Hemminger
Stephen Hemminger
Serhey Popovych
Christian Brauner
Jakub Kicinski
Gal Pressman
Mike Frysinger
Filip Moc