Commit d3432bf10f17 ("net: Support filtering interfaces on no master")
in the kernel added support for filtering interfaces/neighbours that
have no master interface.
This patch completes it and adds this support to iproute2:
1. ip link show nomaster
2. ip address show nomaster
3. ip neighbour {show | flush} nomaster
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for mcast_vlan_snooping option which controls per-vlan
multicast snooping, also update the man page.
Syntax: $ ip link set dev bridge type bridge mcast_vlan_snooping 0/1
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The ip link property add/delete requires a device; but the
device argument was not show on the man page.
It is correct in the usage message.
Fixes: 3aa0e51be6 ("ip: add support for alternative name addition/deletion/list")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.
This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.
Signed-off-by: Jethro Beekman <kernel@jbeekman.nl>
Signed-off-by: David Ahern <dsahern@kernel.org>
* Fix PROTO description in help message (mpls isn't a valid argument).
* Remove SRCPORTMIN description from help message since it doesn't
appear in the syntax string.
* Use same keywords in help message and in man page.
* Use the "ethertype" option name (.B ethertype) rather than the
option value (.I ETHERTYPE) in the man page description of
[no]multiproto.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch allows the user to set and retrieve the
IFLA_MACVLAN_BC_QUEUE_LEN parameter via the bcqueuelen
command line argument
This parameter controls the requested size of the queue for
broadcast and multicast packages in the macvlan driver.
If not specified, the driver default (1000) will be used.
Note: The request is per macvlan but the actually used queue
length per port is the maximum of any request to any macvlan
connected to the same port.
For this reason, the used queue length IFLA_MACVLAN_BC_QUEUE_LEN_USED
is also retrieved and displayed in order to aid in the understanding
of the setting. However, it can of course not be directly set.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Signed-off-by: David Ahern <dsahern@gmail.com>
Added description of link flags allmulticast, promisc and trailers.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for recently
added link IFLA_PROTO_DOWN_REASON attribute.
IFLA_PROTO_DOWN_REASON enumerates reasons
for the already existing IFLA_PROTO_DOWN link
attribute.
$ cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity
$ ip link set dev vx10 protodown on protodown_reason vrrp on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"proto_down_reason": [ "vrrp" ]
} ]
$ip link set dev vx10 protodown_reason mlag on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <mlag,vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"protodown_reason": [ "mlag","vrrp" ]
} ]
$ip -p -j link show dev vx10
$ip link set dev vx10 protodown off protodown_reason vrrp off
Error: Cannot clear protodown, active reasons.
$ip link set dev vx10 protodown off protodown_reason mlag off
$
Note: for somereason the json and non-json key for protodown
are different (protodown and proto_down). I have kept the
same for protodown reason for consistency (protodown_reason and
proto_down_reason).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
PRP support requires a proto parameter which is 0 for hsr and 1 for
prp. Default is hsr and is backward compatible.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Bareudp devices provide a generic L3 encapsulation for tunnelling
different protocols like MPLS, IP, NSH, etc. inside a UDP tunnel.
This patch is based on original work from Martin Varghese:
https://lore.kernel.org/netdev/1570532361-15163-1-git-send-email-martinvarghesenokia@gmail.com/
Examples:
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc
This creates a bareudp tunnel device which tunnels L3 traffic with
ethertype 0x8847 (unicast MPLS traffic). The destination port of the
UDP header will be set to 6635. The device will listen on UDP port 6635
to receive traffic.
- ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto
Same as the MPLS example, but for IPv4. The "multiproto" keyword allows
the device to also tunnel IPv6 traffic.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The Type I ERSPAN frame format is based on the barebones
IP + GRE(4-byte) encapsulation on top of the raw mirrored frame.
Both type I and II use 0x88BE as protocol type. Unlike type II
and III, no sequence number or key is required.
To creat a type I erspan tunnel device:
$ ip link add dev erspan11 type erspan \
local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 0
CC: Dmitriy Andreyevskiy <dandreye@cisco.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
PPP devices can be moved to different network namespaces. The feature
was added by commit 79c441ae505c ("ppp: implement x-netns support")
in Linux 4.3.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
By default, all devices are listed, not only the default group.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add the command alias "change" to man page.
Don't show it on usage, since it is not commonly used.
Reported-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matteo Croce <mcroce@redhat.com>
This patch adds support for the VLAN bridge binding flag that is
provided in net-next kernel by the series merged by 1ab839281cf7
("net-support-binding-vlan-dev-link-state-to-vlan-member-bridge-ports")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for manipulating and showing the vlan_stats_per_port bridge
option which can be toggled only when there are no port VLANs
configured. Also update the man page with the new option.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Interfaces take a 'if_id' which is an interface id which can be set on
an xfrm policy as its interface lookup key (XFRMA_IF_ID).
Signed-off-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This adds configuration for the IFLA_BRPORT_MCAST_TO_UCAST flag that
allows multicast packets to be replicated as unicast packets.
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch simply changes the description of the mcast_flood flag
with "flood" instead of "be flooded with" to avoid confusion, and be
consistent with the description of the flooding flag, which "Controls
whether a given port will *flood* unicast traffic for which there is
no FDB entry."
At the same time, fix the documentation for the "flood" flag which
is incorrectly described as "flooding on" or "flooding off".
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow to set the DF bit behaviour for outgoing IPv4 packets: it can be
always on, inherited from the inner header, or, by default, always off,
which is the current behaviour.
v2:
- Indicate in the man page what DF refers to, using RFC 791 wording
(David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow to set the DF bit behaviour for outgoing IPv4 packets: it can be
always on, inherited from the inner header, or, by default, always off,
which is the current behaviour.
v2:
- Indicate in the man page what DF refers to, using RFC 791 wording
(David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently when we add geneve with "ttl inherit", we only set ttl to 0, which
is actually use whatever default value instead of inherit the inner protocol's
ttl value.
To make a difference with ttl inherit and ttl == 0, we add an attribute
IFLA_GENEVE_TTL_INHERIT in kernel commit 52d0d404d39dd ("geneve: add ttl
inherit support"). Now let's use "ttl inherit" to inherit the inner
protocol's ttl, and use "ttl auto" to means "use whatever default value",
the same behavior with ttl == 0.
v2:
1) remove IFLA_GENEVE_TTL_INHERIT defination in if_link.h as it's already
updated.
2) Still use addattr8() so we can enable/disable ttl inherit, as Michal
suggested.
v3: Update man page
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new backup port option that can be set
on a bridge port. If the port's carrier goes down all of the traffic
gets redirected to the configured backup port. We add the following new
arguments:
$ ip link set dev brport type bridge_slave backup_port brport2
$ ip link set dev brport type bridge_slave nobackup_port
$ bridge link set dev brport backup_port brport2
$ bridge link set dev brport nobackup_port
The man pages are updated respectively.
Also 2 minor style adjustments:
- add missing space to bridge man page's state argument
- use lower starting case for vlan_tunnel in ip-link man page (to be
consistent with the rest)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
IPVLAN and IPVTAP are using the same functions and parameters. So we can
just add a new link_util with id ipvtap. Others are the same.
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new isolated port option which, if set,
would allow the isolated ports to communicate only with non-isolated
ports and the bridge device. The option can be set via the bridge or ip
link type bridge_slave commands, e.g.:
$ ip link set dev eth0 type bridge_slave isolated on
$ bridge link set dev eth0 isolated on
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds basic support for Qualcomm rmnet devices.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, iproute allows setting those flags, but it's impossible to
clear them, since their current value is fetched from the kernel and
then we OR in the additional flags passed on the command line.
Add no* variants to allow clearing them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
GRE tunnels are currently only documented together with IPIP and SIT
tunnels, but they actually have very different configuration
options. Let's separate them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
For IP-in-IP tunnels, one can specify the [no]allow-localremote command
when configuring a device. Under the hood, this flips the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
tunnels, and thus there's no way to configure the flag on these
netdevices. Therefore introduce the command to link_gre6 as well.
The original support was introduced in commit 21440d19d9
("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Zero value in min/max_tx_rate has a special meaning of no rate limit,
document it.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
netdevsim is a new software device for testing kernel APIs
without any hardware attached. Allow users to create such
devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Lintian detected the following formatting errors:
man/man8/devlink-sb.8.gz 230: warning: macro `b' not defined
man/man8/ip-link.8.gz 1243: warning: macro `in-8' not defined
(possibly missing space after `in')
man/man8/tc-u32.8.gz `R' is a string (producing the registered sign),
not a macro.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The patch adds support for configuring the erspan v2, for both
ipv4 and ipv6 erspan implementation. Three additional fields
are added: 'erspan_ver' for distinguishing v1 or v2, 'erspan_dir'
for specifying direction of the mirrored traffic, and 'erspan_hwid'
for users to set ERSPAN engine ID within a system.
As for manpage, the ERSPAN descriptions used to be under GRE, IPIP,
SIT Type paragraph. Since IP6GRE/IP6GRETAP also supports ERSPAN,
the patch removes the old one, creates a separate ERSPAN paragrah,
and adds an example.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Luca Boccassi
Taehee Yoo
Lahav Schlesinger
David Ahern
Nikolay Aleksandrov
Stephen Hemminger
Jethro Beekman
Guillaume Nault
Thomas Karlsson
David Ahern
Roman Mashak
Roopa Prabhu
Murali Karicheri
William Tu
Jiri Pirko
Florent Fourcot
Mike Manning
Nikolay Aleksandrov
Matt Ellison
Tobias Jungel
Vivien Didelot
Stefano Brivio
Hangbin Liu
Daniele Palmas
Sabrina Dubroca
Petr Machata
Gal Pressman
Jakub Kicinski
Serhey Popovych