These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When creating socket() AF_INET is used irrespective of the family
that is given at the command-line (with -4, -6, or -0). This change
will open the socket with the preferred family.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When adding support for JSON output the new code for printing
the destination prefix adds a stray blank character before
the bitmask. This causes some user-space parsing to fail.
Current output:
...: from x.x.x.x/l to y.y.y.y /l
Previous output:
...: from x.x.x.x/l to y.y.y.y/l
Fixes: 0dd4ccc5 "iprule: add json support"
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This allows the user to specify the LWTUNNEL_IP_SRC/LWTUNNEL_IP6_SRC
when setting an lwtunnel encapsulation route.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
This option can't be set by user and is never printed.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David Ahern <dsahern@gmail.com>
This option can't be set by user and is never printed. Furthermore,
L2TP_ATTR_DATA_SEQ has always been a noop in Linux.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David Ahern <dsahern@gmail.com>
When 'ip link show dev DEVICE' is processed in a batch mode, ip exits
and stop processing further commands.
This because ipaddr_list_flush_or_save() calls exit() to avoid printing
the link information twice.
Replace the exit with a classic goto out instruction.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the End.BPF action of the seg6local
lightweight tunnel. Functions from the BPF lightweight tunnel are
re-used in this patch. Example:
$ ip -6 route add fc00::18 encap seg6local action End.BPF endpoint
obj my_bpf.o sec my_func dev eth0
$ ip -6 route show fc00::18
fc00::18 encap seg6local action End.BPF endpoint my_bpf.o:[my_func]
dev eth0 metric 1024 pref medium
v2: - re-use of print_encap_bpf_prog instead of fprintf
- introduction of "endpoint" keyword for more consistency with
others parameters
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit 9516823051 ("ipaddress: Improve print_linkinfo()") we
return -1 instead of 0 when ip-address(8) label does not match network
device name as we did before change. This causes regression when trying
to output ip address matching label:
# ip addr add 192.168.192.1/24 dev lo label lo:1
# ip addr show label lo:1
<no output>
This is special case and return 0 from print_linkinfo() earlier to match
only filter.ifindex and filter.up if given, but not rest fields in
@filter. Then call print_selected_addrinfo() without calling
print_link_stats() in ipaddr_list_flush_or_save().
Later print_selected_addrinfo() calls print_addrinfo() that finally
matches IFA_LABEL attribute in netlink buffer with filter.label using
ifa_label_match_rta().
On the other hand there is three conditions checked in print_linkinfo()
to determine label special case:
1) filter.label != NULL
2) filter.family == AF_UNSPEC || filter.family == AF_PACKET
3) fnmatch(filter.label, name, 0)
With 1) it is ok to check if filtering by label is on by given pattern
in @filter.label.
Since label is IPv4 specific and AF_PACKET is for printing ip-link(8)
information (see ipaddr_link_list()::ipaddress.c as example) checking
for AF_PACKET in 2) doesn't take much sense: better to defer these
checks to print_addrinfo() determine valid combinations before calling
ifa_label_match_rta() to finally match IFA_LABEL to pattern in
filter.label.
For 3) we have following call for test case:
fnmatch(pattern, string, flags) ->
fnmatch(filter.label, name, 0) ->
fnmatch("lo:1", "lo", 0) == FNM_NOMATCH (1) or non-zero on error
To support special case in print_linkinfo() for filtering by label we
only need to check if label pattern is given in filter.label and return
0 to skip print_link_stats() in ipaddr_list_flush_or_save(): actual
filtering will be done in print_addrinfo().
Before commit 9516823051 ("ipaddress: Improve print_linkinfo()"):
-------------------------------------------------------------------
$ ip addr sh label lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN \
group default qlen 1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
fnmatch("lo", "lo", 0) == 0
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ip addr show label 'lo:*'
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip addr sh label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip -4 addr sh label lo:1
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN \
group default qlen 1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
filter.family == AF_INET
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
After this change applied:
--------------------------
$ ip/ip addr show label lo
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ip/ip addr show label 'lo:*'
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip/ip addr show label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip/ip -4 addr show label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
Note that we no longer show link information as we did previously:
we are filtering by "label" pattern, not showing by "dev".
Fixes: commit 9516823051 ("ipaddress: Improve print_linkinfo()")
Reported-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
NUD_NOARP entries are filtered out by default by iproute2.
We dont want NUD_NOARP with NTF_EXT_LEARNED flag filtered out.
This patch extends the default filter check for ip neigh show
to include the NTF_EXT_LEARNED flag.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel now supports attaching XDP programs in the driver
and hardware at the same time. Print that information
correctly.
In case there are multiple programs attached kernel will
not provide IFLA_XDP_PROG_ID, so don't expect it to be
there (this also improves the printing for very old kernels
slightly, as it avoids unnecessary "prog/xdp" line).
In short mode preserve the current outputs but don't print
IDs if there are multiple.
6: netdevsim0: <BROADCAST,NOARP> mtu 1500 xdpoffload/id:11 qdisc [...]
and:
6: netdevsim0: <BROADCAST,NOARP> mtu 1500 xdpmulti qdisc [...]
ip link output will keep using prog/xdp prefix if only one program
is attached, but can also print multiple program lines:
prog/xdp id 8 tag fc7a51d1a693a99e jited
vs:
prog/xdpdrv id 8 tag fc7a51d1a693a99e jited
prog/xdpoffload id 9 tag fc7a51d1a693a99e
JSON output gains a new array called "attached" which will
contain the full list of attached programs along with their
attachment modes:
"xdp": {
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
},
"attached": [ {
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
}
} ]
},
In case there are multiple programs attached the general "xdp"
section will not contain program information:
"xdp": {
"mode": 4,
"attached": [ {
"mode": 1,
"prog": {
"id": 10,
"tag": "fc7a51d1a693a99e",
"jited": 1
}
},{
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
}
} ]
},
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new isolated port option which, if set,
would allow the isolated ports to communicate only with non-isolated
ports and the bridge device. The option can be set via the bridge or ip
link type bridge_slave commands, e.g.:
$ ip link set dev eth0 type bridge_slave isolated on
$ bridge link set dev eth0 isolated on
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for OUTPUT_MARK in xfrm state to exercise the
functionality added by kernel commit 077fbac405bf
("net: xfrm: support setting an output mark.").
Sample output-
(with mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with output-mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(no mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
v1->v2: Moved the XFRMA_OUTPUT_MARK print after XFRMA_MARK in
xfrm_xfrma_print() as mentioned by Lorenzo
v2->v3: Fix one help formatting error as mentioned by Lorenzo.
Keep mark and output-mark on the same line and add man page info as
mentioned by David.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds basic support for Qualcomm rmnet devices.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As mentioned in the ip-address man page, an address label must
be equal to the device name or prefixed by the device name
followed by a colon. Currently the only check on this input is
to see if the device name appears at the beginning of the label
string.
This commit adds an additional check to ensure label == dev or
continues with a colon.
Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The 'link-netnsid' argument needs a number. Add 'link-netns' when the user
wants to use the iproute2 netns name instead of the nsid.
Example:
ip link add ipip1 link-netns foo type ipip remote 10.16.0.121 local 10.16.0.249
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When iproute2 has a name for the nsid, let's display it. It's more
user friendly than a number.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Parse and display those attributes.
Example:
ip l a type dummy
ip netns add foo
ip monitor link&
ip l s dummy1 netns foo
Deleted 6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 66:af:3a:3f:a0:89 brd ff:ff:ff:ff:ff:ff new-nsid 0 new-ifindex 6
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, calling 'ip xfrm monitor all' will
actually invoke the 'all-nsid' command because the
soft-match for 'all-nsid' occurs before the precise
match for 'all'. This patch rearranges the checks
so that the 'all' command, itself an alias for
invoking 'ip xfrm monitor' with no argument, can
be called consistent with the syntax for other ip
commands that accept an 'all'.
Signed-off-by: Nathan Harold <nharold@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A recent commit changed rtnl_talk_* to return the response message in
allocated memory so callers need to free it. The change to name_is_vrf
did not save the device index which is pointing to a struct inside the
now allocated and freed memory resulting in garbage getting returned
in some cases.
Fix by using a stack variable to save the return value and only set
it to ifi->ifi_index after all checks are done and before the answer
buffer is freed.
Fixes: 86bf43c7c2 ("lib/libnetlink: update rtnl_talk to support malloc buff at run time")
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
RTA_CACHEINFO can be sent for non-cloned routes. If the attribute is
present print it. Allows route dumps to print expires times for example
which can exist on FIB entries.
Signed-off-by: David Ahern <dsahern@gmail.com>
The ip command would always lookup the network device index
even when not necessary. This slows down operations like creating
lots of VLAN's.
David reported the original issue, this is an alternative patch
that solves it in a slightly more general method.
Using iproute2 to create a bridge and add 4094 vlans to it can take from
2 to 3 *minutes*. The reason is the extraneous call to ll_name_to_index.
ll_name_to_index results in an ioctl(SIOCGIFINDEX) call which in turn
invokes dev_load. If the index does not exist, which it won't when
creating a new link, dev_load calls modprobe twice -- once for
netdev-NAME and again for NAME. This is unnecessary overhead for each
link create.
When ip link is invoked for a new device, there is no reason to
call ll_name_to_index for the new device. With this patch, creating
a bridge and adding 4094 vlans takes less than 3 *seconds*.
old:
# time ip -batch ip-vlan.batch
real 3m13.727s
user 0m0.076s
sys 0m1.959s
new:
# time ip -batch ip-vlan.batch
real 0m3.222s
user 0m0.044s
sys 0m1.777s
Reported-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rta_expires is a signed int; print it as one.
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Continue parsing a multipath payload as long as another nexthop can fit
in the payload.
# ip route add 192.0.2.0/24 nexthop dev dummy0 nexthop dev dummy1
Before:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
After:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
nexthop dev dummy1 weight 1
Fixes: f48e14880a ("iproute: refactor multipath print")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, iproute allows setting those flags, but it's impossible to
clear them, since their current value is fetched from the kernel and
then we OR in the additional flags passed on the command line.
Add no* variants to allow clearing them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern
Mahesh Bandewar
Stefan Bader
Stephen Hemminger
Phil Sutter
Shmulik Ladkani
Stephen Hemminger
Guillaume Nault
Matteo Croce
Eran Ben Elisha
Mathieu Xhonneux
Serhey Popovych
Roopa Prabhu
Jakub Kicinski
Nikolay Aleksandrov
Subash Abhinov Kasiviswanathan
Daniele Palmas
Patrick Talbert
Nicolas Dichtel
Nathan Harold
Ido Schimmel
Toke Høiland-Jørgensen
Hangbin Liu
Sabrina Dubroca