The kernel already supports it, so add the support
to iproute2 as well.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
ip xfrm considers that the user-defined mark is "any" as soon as
(mark.v & mark.m == 0), which prevents from specifying non-wildcard
marks that include the value 0 (typically 0/0xffffffff).
Yet, matching exactly mark 0 is useful for instance to separate
vti policies from global policies.
Always configure the user mark if mark.m != 0.
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
This bug is reported from below link:
https://bugzilla.redhat.com/show_bug.cgi?id=982761
An simplified command from its original reproducing method in bugzilla:
ip xfrm state add src 10.0.0.2 dst 10.0.0.1 proto ah spi 0x12345678 auth md5 12
will cause below spew from gcc.
Reported-by: Sohny Thomas <sthomas@linux.vnet.ibm.com>
Since commit a05f6511f5, ip batch mode is broken when using 'netns exec' cmd.
When WIFEXITED() returns true, it means that the child exited normally, hence
we must not call exit() but just returns the status. If we call exit, the next
commands in the file file are not executed.
If WIFEXITED() returns false, we can call exit() because it means that the
child failed.
This patch partially reverts commit a05f6511f5.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The git-commit dc8867d0, that added support for displaying the
extra-flags of a state, introduced a potential segfault.
Trying to show a state without the extra-flag attribute and show_stats
enabled, would cause the NULL pointer in tb[XFRMA_SA_EXTRA_FLAGS] to be
dereferenced.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
The mode information is contained in IFLA_MACVLAN_MODE instead
of IFLA_VLAN_ID (both evaluating to "1" in their enums).
Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com>
Prefix labelling is currently only activated when monitoring "all"
objects. However, the output can still be confusing when monitoring
more than 1 object, so add an option to always print prefix labels.
Signed-off-by: Martin Schwenke <martin@meltin.net>
When configuring a system with multiple network uplinks and default routes, it
is often convenient to reference a routing table multiple times - but reject
its routing decision if certain constraints are not met by it.
Consider this setup:
$ ip route add table secuplink default via 10.42.23.1
$ ip rule add pref 100 table main suppress_prefixlength 0
$ ip rule add pref 150 fwmark 0xA table secuplink
With this setup, packets marked 0xA will be processed by the additional routing
table "secuplink", but only if no suitable route in the main routing table can
be found. By suppressing entries with a prefixlength of 0 (or less), the
default route (/0) of the table "main" is hidden to packets processed by rule
100; packets traveling to destinations via more specific routes are processed
as usual.
It is also possible to suppress a routing entry if a device belonging to
a specific interface group is to be used:
$ ip rule add pref 150 table main suppress_group 1
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
This change adds the interface group to the output of "ip link show".
It also makes "ip link" print _all_ devices if no group filter is specified;
previously, only interfaces of the default group (0) were shown.
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
This patch allows setting VXLAN destination to unicast address.
It allows that VXLAN can be used as peer-to-peer tunnel without
multicast.
v6: change back to the v3 except for using new attribute because
replacing command-line parameters breaks existing scripts,
based by Cong Wang's comments.
v5: rebase on the latest.
v4: replace "group" with "remote" based by David Stevens's comments.
v3: move a new attribute REMOTE into the last of an enum list
based by Stephen Hemminger's comments.
fix the usage to show explicitly that both "remote" and "group"
cannot be specified, based by Ben Hutchings's comments.
v2: use a new argument "remote" instead of "group" based by
Stephen Hemminger's comments.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
The netns code was using EXIT_SUCCESS/EXIT_FAILURE but the rest of the ip
code used -1 explictly, so change to follow convention. Also, certain types
of errors like fork failure should abort a batch operation, rather than just
returning an error.
execvp() does not return when the command succeed, hence all commands in the
batch file after the line 'ip netns exec' are not executed.
Let's fork before calling execvp() if batch mode is used..
Example:
$ cat test.batch
netns add netns1
netns exec netns1 ip l
netns
$ ip -b test.batch
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
All command after 'netns exec' are never executed.
With the patch:
$ ip -b test.batch
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
netns1
Now, existing netns are displayed.
Signed-off-by: JunweiZhang <junwei.zhang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Without patch, I got:
# ./ip/ip tunnel show
ip_vti0: ioctl 89f4 failed: Invalid argument
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
this is due to VTI_ISVTI has the same numeric value with SIT_ISATAP,
but only sit tunnel has SIOCGETPRL, therefore it should check for SIT
tunnel first.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch adds quickack option to enable/disable TCP quick ack
mode for per-route.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch adds multi_queue option to ip tuntap.
This allows IFF_MULTI_QUEUE flag to be specified during
tun/tap device creation enabling multi-queue support in tun/tap
device.
Example: ip tuntap add dev tap0 mode tap multi_queue
Signed-off-by: Sriram Narasimhan <sriram.narasimhan@hp.com>
This is now possible, because the dump function has been added in kernel.
Note that IPv4 and IPv6 entries are displayed.
Before this patch, only all entries were displayed.
Example:
$ ip netconf
ipv4 dev lo forwarding on rp_filter off mc_forwarding 0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
ipv4 all forwarding on rp_filter off mc_forwarding 1
ipv4 default forwarding on rp_filter off mc_forwarding 0
ipv6 dev lo forwarding on mc_forwarding 0
ipv6 dev eth0 forwarding on mc_forwarding 0
ipv6 all forwarding on mc_forwarding 0
ipv6 default forwarding on mc_forwarding 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For the display part, we print extra-flags only if show_stats is set, like for
standard flags.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This change shifts burden onto the users to choose the UDP port value.
Kernel default value is incorrect UDP port 5287 but now there is
an official assigned port for VXLAN.
The kernel can't change because of legacy compatibility
but new deployments should not use the legacy port value.
Add ability to set UDP destination port on a per device basis.
If no port is assigned, the default IANA assigned port will be used.
If you want the kernel default value, then use port 0.
Source port range option is now called 'srcport', to avoid
confusion. The old option syntax is accepted for compatiablity.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for tokenized IIDs, that enable
administrators to assign well-known host-part addresses
to nodes whilst still obtaining global network prefix
from Router Advertisements. This is the iproute2 part for
the kernel patch f53adae4eae5 (``net: ipv6: add tokenized
interface identifier support'').
Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1
Getting a device token:
# ip token get dev eth1
token ::1a:2b:3c:4d dev eth1
Listing all tokens:
# ip token list (or: ip token)
token :: dev eth0
token ::1a:2b:3c:4d dev eth1
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).
List the algorithm names that currently exist in the kernel.
Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.
Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.
This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>
My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
WANG Cong
Nicolas Dichtel
Christophe Gouault
xeb@mail.ru
Fan Du
Stephen Hemminger
Thomas Egerer
Lutz Jaenicke
Richard Godbee
Martin Schwenke
Stefan Tomanek
Atzm Watanabe
JunweiZhang
Amerigo Wang
Adam Borowski
Patric McHardy
Rony Efraim
Andrey Vagin
Sriram Narasimhan
Daniel Borkmann
David Ward
James Chapman
Thomas Egerer