Make use of flower_port_attr_type() safe:
* flower_port_attr_type() may return a valid index into tb[] or -1.
Only access tb[] in the case of the former.
* Do not access null entries in tb[]
Also make usage silent - it is valid for ip_proto to be invalid,
for example if it is not specified as part of the filter.
Fixes: a1fb0d4842 ("tc: flower: Support matching on SCTP ports")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The 'unset' action is optional. It is used to explicitly unset the
metadata created by the tunnel device during decap. If not used, the
metadata will be released automatically by the kernel.
The 'set' operation, will set the metadata with the specified values for
the encap.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0':
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action mirred egress redirect dev vnet0
Signed-off-by: Amir Vadai <amir@vadai.me>
This work moves the bpf loader into the iproute2 library and reworks
the tc specific parts into generic code. It's useful as we can then
more easily support new program types by just having the same ELF
loader backend. Joint work with Thomas Graf. I hacked a rough start
of a test suite to make sure nothing breaks [1] and looks all good.
[1] https://github.com/borkmann/clsact/blob/master/test_bpf.sh
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Support matching on SCTP ports in the same way that matching
on TCP and UDP ports is already supported.
Example usage:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 ip_proto sctp dst_port 80 \
action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Remove left over usage from removal of eth_type argument.
Fixes: 488b41d020 ('tc: flower no need to specify the ethertype')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
So far, only the 'egress' direction was implemented.
Allow specifying 'ingress' as the direction packet appears on the target
interface.
For example, this takes incoming 802.1q frames on veth0 and redirects
them for input on dummy0:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q basic \
action mirred ingress redirect dev dummy0
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Since 5cd1adba79 ("Update to current iptables headers") compilation
of iproute2 broke for systems without iptables-devel package [1].
Reason is that even though we fall back to build m_ipt.c, the include
depends on a xtables-version.h header, which only ships with
iptables-devel. Machines not having this package fail compilation with:
[...]
CC m_ipt.o
In file included from ../include/iptables.h:5:0,
from m_ipt.c:17:
../include/xtables.h:34:29: fatal error: xtables-version.h: No such file or directory
compilation terminated.
../Config:31: recipe for target 'm_ipt.o' failed
make[1]: *** [m_ipt.o] Error 1
The configure script only barks that package xtables was not found in
the pkg-config search path. The generated Config then only contains f.e.
TC_CONFIG_IPSET. In tc's Makefile we thus fall back to adding m_ipt.o
to TCMODULES. m_ipt.c then includes the local include/iptables.h header
copy, which includes the include/xtables.h copy. Latter then includes
xtables-version.h, which only ships with iptables-devel.
One way to resolve this is to skip this whole mess when pkg-config has
no xtables config available. I've carried something along these lines
locally for a while now, but it's just too annyoing. :/ Build works fine
now also when xtables.pc is not available.
[1] http://www.spinics.net/lists/netdev/msg366162.html
Fixes: 5cd1adba79 ("Update to current iptables headers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for controling hardware offload using (now standard)
skip_sw and skip_hw flags in cls_bpf.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
sudo $TC filter add dev $ETH parent ffff: prio 2 protocol ip \
u32 match u32 0 0 flowid 1:1 \
action ok
sudo $TC filter add dev $ETH parent ffff: prio 1 protocol ip \
u32 match ip protocol 1 0xff flowid 1:10 \
action ok
now dump to see all rules..
$TC -s filter ls dev $ETH parent ffff: protocol ip
....
filter pref 1 u32
filter pref 1 u32 fh 801: ht divisor 1
filter pref 1 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10 (rule hit 0 success 0)
match 00010000/00ff0000 at 8 (success 0 )
action order 1: gact action drop
random type none pass val 0
index 6 ref 1 bind 1 installed 4 sec used 4 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter pref 2 u32
filter pref 2 u32 fh 800: ht divisor 1
filter pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 336 success 336)
match 00000000/00000000 at 0 (success 336 )
action order 1: gact action pass
random type none pass val 0
index 5 ref 1 bind 1 installed 38 sec used 4 sec
Action statistics:
Sent 24864 bytes 336 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
..get filter 801::800
$TC -s filter get dev $ETH parent ffff: protocol ip \
handle 801:0:800 prio 2 u32
....
filter parent ffff: protocol ip pref 1 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10 (rule hit 260 success 130)
match 00010000/00ff0000 at 8 (success 130 )
action order 1: gact action drop
random type none pass val 0
index 6 ref 1 bind 1 installed 348 sec used 0 sec
Action statistics:
Sent 11440 bytes 130 pkt (dropped 130, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
..get other one
$TC -s filter get dev $ETH parent ffff: protocol ip \
handle 800:0:800 prio 2 u32
....
filter parent ffff: protocol ip pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 514 success 514)
match 00000000/00000000 at 0 (success 514 )
action order 1: gact action pass
random type none pass val 0
index 5 ref 1 bind 1 installed 506 sec used 4 sec
Action statistics:
Sent 35544 bytes 514 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
..try something that doesnt exist
$TC -s filter get dev $ETH parent ffff: protocol ip handle 800:0:803 prio 2 u32
.....
RTNETLINK answers: No such file or directory
We have an error talking to the kernel
.....
Note, added NLM_F_ECHO is for backward compatibility. old kernels never
before Eric's patch will not respond without it and newer kernels (after Erics patch)
will ignore it.
In old kernels there is a side effect:
In addition to a response to the GET you will receive an event (if you do tc mon).
But this is still better than what it was before (not working at all).
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This action is intended to be an upgrade from a usability perspective
from pedit (as well as operational debugability).
Compare this:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action pedit munge offset -14 u8 set 0x02 \
munge offset -13 u8 set 0x15 \
munge offset -12 u8 set 0x15 \
munge offset -11 u8 set 0x15 \
munge offset -10 u16 set 0x1515 \
pipe
to:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod dmac 02:15:15:15:15:15
Or worse, try to debug a policy with destination mac, source mac and
etherype. Then make that a hundred rules and you'll get my point.
The most important ethernet use case at the moment is when redirecting or
mirroring packets to a remote machine. The dst mac address needs a re-write
so that it doesn't get dropped or confuse an interconnecting (learning) switch
or dropped by a target machine (which looks at the dst mac).
In the future common use cases on pedit can be migrated to this action
(as an example different fields in ip v4/6, transports like tcp/udp/sctp
etc). For this first cut, this allows modifying basic ethernet header.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
In linux-4.9 fq packet scheduler got a new stat :
unthrottle_latency in nano second units.
Gives a good indication of system load or timer implementation
latencies.
Signed-off-by: Eric Dumazet <edumazet@google.com>
The 'vlan modify' action allows to replace an existing 802.1q tag
according to user provided settings.
It accepts same arguments as the 'vlan push' action.
For example, this replaces vid 6 with vid 5:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q \
basic match 'meta(vlan mask 0xfff eq 6)' \
action vlan modify id 5 continue
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Currently, 'linkid' input by the user is parsed but 'handle' is appended to the netlink message.
# tc filter add dev enp1s0f1 protocol ip parent ffff: prio 99 u32 ht 800: \
order 1 link 1: offset at 0 mask 0f00 shift 6 plus 0 eat match ip \
protocol 6 ff
resulted in:
filter protocol ip pref 99 u32 fh 800::1 order 1 key ht 800 bkt 0
match 00060000/00ff0000 at 8
offset 0f00>>6 at 0 eat
This patch results in:
filter protocol ip pref 99 u32 fh 800::1 order 1 key ht 800 bkt 0 link 1:
match 00060000/00ff0000 at 8
offset 0f00>>6 at 0 eat
Signed-off-by Sushma Sitaram: Sushma Sitaram <sushma.sitaram@intel.com>
since get_qdisc_handle() truncates the input value to 16 bit, return an
error and prompt "invalid qdisc ID" in case input 'handle' parameter needs
more than 16 bit to be stored.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>
The current vlan push action supports only vid and protocol options.
Add priority option.
Example script that adds vlan push action with vid and priority:
tc filter add dev veth0 protocol ip parent ffff: \
flower \
indev veth0 \
action vlan push id 100 priority 5
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Classification according to vlan id and vlan priority.
Example script that adds vlan filter:
# add ingress qdisc
tc qdisc add dev ens4f0 ingress
# add a flower filter with vlan id and priority classification
tc filter add dev ens4f0 protocol 802.1Q parent ffff: \
flower \
indev ens4f0 \
vlan_ethtype ipv4 \
vlan_id 100 \
vlan_prio 3 \
action vlan pop
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
The matchall classifier matches every packet and allows the user to apply
actions on it. In addition, it supports the skip_sw and skip_hw (as can
be found on u32 and flower filter) that direct the kernel to skip the
software/hardware processing of the actions.
This filter is very useful in usecases where every packet should be
matched. For example, packet mirroring (SPAN) can be setup very easily
using that filter.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Before this patch:
# ./tc/tc actions add action drop index 11
RTNETLINK answers: File exists
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
After this patch:
# ./tc/tc actions add action drop index 11
RTNETLINK answers: File exists
We have an error talking to the kernel
Cc: Stephen Hemminger <shemming@brocade.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
The function returns zero on success.
Reported-by: Mark Bloch <markb@mellanox.com>
Fixes: 69f5aff63c ("tc: use action_a2n() everywhere")
Signed-off-by: Phil Sutter <phil@nwl.cc>
When switching to C99 initializers, I forgot to add this one. This means
that when trying to set an estimator value, tc would complain about
spurious duplicate estimator parameter. But much worse, the random
variable content is sent to the kernel regardless of whether an
estimator was given or not.
Fixes: d17b136f7d ("Use C99 style initializers everywhere")
Reported-by: Stas Nichiporovich <stasn77@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Simon Horman
Amir Vadai
Stephen Hemminger
Roman Mashak
Daniel Borkmann
Stephen Hemminger
Paul Blakey
Shmulik Ladkani
Jakub Kicinski
Jamal Hadi Salim
Craig Dillabaugh
Eric Dumazet
Sushma Sitaram
Davide Caratti
Hadar Hen Zion
Yotam Gigi
WANG Cong
Stephen Hemminger
Phil Sutter