Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Remove references to eth_type and ether_type (spelling error) in
the tc flower manpage.
Also correct formatting of boldface text with whitespace.
Cc: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The 'unset' action is optional. It is used to explicitly unset the
metadata created by the tunnel device during decap. If not used, the
metadata will be released automatically by the kernel.
The 'set' operation, will set the metadata with the specified values for
the encap.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0':
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action mirred egress redirect dev vnet0
Signed-off-by: Amir Vadai <amir@vadai.me>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
v5:
- rebase and fix checkpatch
v4:
- add MACADDR_SET support
- skip FLAG_UNICAST / FLAG_UNICAST_ALL as this is not upstream
- fix man page
This makes use of the sctp_diag interface recently added to the kernel.
Joint work with Xin Long who provided the PoC implementation which I
merely polished up a bit.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Remove left over usage from removal of eth_type argument.
Fixes: 488b41d020 ('tc: flower no need to specify the ethertype')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
So far, only the 'egress' direction was implemented.
Allow specifying 'ingress' as the direction packet appears on the target
interface.
For example, this takes incoming 802.1q frames on veth0 and redirects
them for input on dummy0:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q basic \
action mirred ingress redirect dev dummy0
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Recently a new per-port flag was added which controls the flooding of
unknown multicast, this patch adds support for controlling it via iproute2.
It also updates the man pages with information about the new flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add support for controling hardware offload using (now standard)
skip_sw and skip_hw flags in cls_bpf.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
Introduce a new API that exposes a list of vlans per VF (IFLA_VF_VLAN_LIST),
giving the ability for user-space application to specify it for the VF as
an option to support 802.1ad (VST QinQ).
We introduce struct vf_vlan_info, which extends struct vf_vlan and adds
an optional VF VLAN proto parameter.
Default VLAN-protocol is 802.1Q.
Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward
compatibility with older kernel versions.
Suitable ip link tool command examples:
- Set vf vlan protocol 802.1ad (S-TAG)
ip link set eth0 vf 1 vlan 100 proto 802.1ad
- Set vf vlan S-TAG and vlan C-TAG (VST QinQ)
ip link set eth0 vf 1 vlan 100 proto 802.1ad vlan 30 proto 802.1Q
- Set vf to VST (802.1Q) mode
ip link set eth0 vf 1 vlan 100 proto 802.1Q
- Or by omitting the new parameter (backward compatible)
ip link set eth0 vf 1 vlan 100
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
The 'vlan modify' action allows to replace an existing 802.1q tag
according to user provided settings.
It accepts same arguments as the 'vlan push' action.
For example, this replaces vid 6 with vid 5:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q \
basic match 'meta(vlan mask 0xfff eq 6)' \
action vlan modify id 5 continue
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Hi,
On Thu, Sep 08, 2016 at 11:59:55AM +0200, Michal Kubecek wrote:
> On Thu, Sep 01, 2016 at 09:04:54AM -0700, Stephen Hemminger wrote:
> > On Tue, 30 Aug 2016 17:32:52 -0700
> > Iskren Chernev <iskren@imo.im> wrote:
> >
> > > From 416f45b62f33017d19a9b14e7b0179807c993cbe Mon Sep 17 00:00:00 2001
> > > From: Iskren Chernev <iskren@imo.im>
> > > Date: Tue, 30 Aug 2016 17:08:54 -0700
> > > Subject: [PATCH bug-fix] iproute: fix documentation for ip rule scan order
> > >
> > > ---
> > > man/man8/ip-rule.8 | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/man/man8/ip-rule.8 b/man/man8/ip-rule.8
> > > index 1774ae3..3508d80 100644
> > > --- a/man/man8/ip-rule.8
> > > +++ b/man/man8/ip-rule.8
> > > @@ -93,7 +93,7 @@ Each policy routing rule consists of a
> > > .B selector
> > > and an
> > > .B action predicate.
> > > -The RPDB is scanned in order of decreasing priority. The selector
> > > +The RPDB is scanned in order of increasing priority. The selector
> > > of each rule is applied to {source address, destination address,
> > > incoming
> > > interface, tos, fwmark} and, if the selector matches the packet,
> > > the action is performed. The action predicate may return with success.
> > > --
> > > 2.4.5
> >
> > Applied
>
> I'm sorry I didn't notice before but this just reverts the change done
> by commit 4957250166 ("iproute2: clarification of various man8 pages").
> IMHO the problem is that both versions are equally confusing as the word
> "priority" can be understood in two different senses.
>
> How about more explicit formulation, e.g.
>
> ... in order of decreasing logical priority (i.e. increasing numeric
> values).
>
> Would that be better?
Looks like the real issue is missing definition of priority. What about
this:
use get_be64() in place of get_u64() when parsing input 'sci' parameter,
so that 'sci' can be entered using network byte order regardless the
endianness of target system; use ntohll() when printing out 'sci'. While
at it, improve documentation of 'sci' in ip-link.8.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
remove hardcoded base 10 parsing of 'port' parameter, update man page
and fix usage() functions as well. Fix misleading line in man page that
theoretically allowed specifying 'port' keyword right after 'sci' keyword.
Provide documentation of 'address' parameter in man pages and in usage()
functions as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
The current vlan push action supports only vid and protocol options.
Add priority option.
Example script that adds vlan push action with vid and priority:
tc filter add dev veth0 protocol ip parent ffff: \
flower \
indev veth0 \
action vlan push id 100 priority 5
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Classification according to vlan id and vlan priority.
Example script that adds vlan filter:
# add ingress qdisc
tc qdisc add dev ens4f0 ingress
# add a flower filter with vlan id and priority classification
tc filter add dev ens4f0 protocol 802.1Q parent ffff: \
flower \
indev ens4f0 \
vlan_ethtype ipv4 \
vlan_id 100 \
vlan_prio 3 \
action vlan pop
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
In addition to providing information about the mathcall filter and its
configurations, the man entry contains examples for creating port
mirorring entries.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
In this patch we introduce the ability to get UDP specific bearer
options such as remoteip, remoteport, localip and localport.
After some discussions on tipc-discussion on how to handle media
specific options we agreed to pass them after the media.
For media generic bearer options we already do:
$ tipc bearer get OPTION media MEDIA name|device NAME|DEVICE
For the UDP media specific bearer options we introduce in this path:
$ tipc bearer get media udp name NAME OPTION
such as
$ tipc bearer get media udp name NAME remoteip
This allows bash-completion to tab complete only appropriate options,
it makes more logical sense and it scales better. Even though it might
look a little different to the user.
In order to use the existing option parsing framework to do this we
add a flag (OPT_KEY) to the option parsing function.
If the UDP bearer has multiple remoteip addresses associated with it
(replicast) we handle the TIPC_NLA_UDP_MULTI_REMOTEIP flag and send
a TIPC_NL_UDP_GET_REMOTEIP query transparently to the user.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Introduce the ability to add remote IP addresses to an existing UDP
bearer. On the kernel side, adding a "remoteip" to an existing bearer
puts the bearer in "replicast" mode where TIPC multicast messages are
send out to each configured remoteip using unicast. This is required
for TIPC UDP bearers to work in environments where IP multicast is
disabled.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Implement kernel devlink e-switch interface. Currently we allow
to get and set the device e-switch mode.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Roi Dayan
Stephen Hemminger
Simon Horman
Amir Vadai
Phil Sutter
Asbjørn Sloth Tønnesen
michael-dev@fami-braun.de
Roman Mashak
Paul Blakey
Shmulik Ladkani
Nikolay Aleksandrov
Jakub Kicinski
Lucas Bates
Jamal Hadi Salim
Hangbin Liu
Moshe Shemesh
Parthasarathy Bhuvaragan
Davide Caratti
Iskren Chernev
Hadar Hen Zion
Yotam Gigi
Richard Alpe
Or Gerlitz