This patch adds support for bridge vlan_protocol.
Example:
$ ip link set br0 type bridge vlan_protocol 802.1ad
$ ip -d link show br0
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
link/ether 44:37:e6🆎cd:ef brd ff:ff:ff:ff:ff:ff promiscuity 0
bridge forward_delay 0 hello_time 200 max_age 2000 ageing_time 30000
stp_state 0 priority 32768 vlan_filtering 0 vlan_protocol 802.1ad
addrgenmode eui64
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Allow user to create a vrf device and specify its table binding.
Based on the iplink_vlan implementation.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
* Improve manual page synopsis and built-it help
* Use full subcommand names (e.g. 'address' and 'maddress')
* Specify when IPv4, IPv6 or both are affected
* Add lifetimes, home and nodad
* Remove any remaining excess spaces
Commit 43d29f7 substantially improves generated ip-address.8 instead of
ip-address.8.in and commit e419f2d removes the generated one losing the
improvements entirely. This commit recovers the lost changes, adapts
them to the current manual page and adds more man page and help
improvements.
Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>
This patch implements support for the IFLA_BR_VLAN_FILTERING attribute
in iproute2 so it can enable/disable vlan_filtering.
Example:
$ ip link set br0 type bridge vlan_filtering 1
$ ip -d link show br0
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default
link/ether 08:00:27:ea:07:38 brd ff:ff:ff:ff:ff:ff promiscuity 0
bridge forward_delay 1500 hello_time 200 max_age 2000 vlan_filtering 1
addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
When showing bridge attributes, show also ageing_time, stp_state and
priority if available.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add support to be able to set and show the value of tlb_dynamic_lb
(IFLA_BOND_TLB_DYNAMIC_LB).
Example:
$ ip -d link show dev bond0 type bond
7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0
bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1
arp_interval 0 arp_validate none arp_all_targets any primary_reselect
always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1
num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 1
addrgenmode eui64
$ ip -d l set dev bond0 type bond tlb_dynamic_lb 0
$ ip -d link show dev bond0 type bond
7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0
bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1
arp_interval 0 arp_validate none arp_all_targets any primary_reselect
always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1
num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 0
addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reset the 'preferred_family' global variable
to its initially set value before each batch
file command is processed.
Signed-off-by: Antti Paila <antti.paila@gmail.com>
This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.
One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.
Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Prefer using the POSIX constant PATH_MAX instead of the legacy BSD
derived MAXPATHLEN. The necessary includes for MAXPATHLEN and PATH_MAX
are <sys/param.h> and <limits.h>, respectively.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Make sure that return value of each socket() call is properly checked
and do not continue processing if the call failed.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
We forgot to include this patch somehow. So do it now.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
This patch replaces exits with returns in
ip route get command handling. This allows batching
of ip route get commands.
$cat route_get_batch.txt
route get 10.0.14.2
route get 12.0.14.2
route get 10.0.14.4
$ip -batch route_get_batch.txt
local 10.0.14.2 dev lo src 10.0.14.2
cache <local>
12.0.14.2 via 192.168.0.2 dev eth0 src 192.168.0.15
cache
10.0.14.4 dev dummy0 src 10.0.14.2
cache
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This patch adds support to retrieve the new bond slave attributes:
IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE
IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE
which are read-only.
(Removed if_link.h changes already updated in net-next)
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Enable reading and displaying SRIOV VFs traffic statistics through
the host PF netdevice using the nested IFLA_VF_STATS attribute.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
This patch fixes incorrect -EINVAL errors due to invalid
scope and type during mpls route deletes.
$ip -f mpls route add 100 as 200 via inet 10.1.1.2 dev swp1
$ip -f mpls route show
100 as to 200 via inet 10.1.1.2 dev swp1
$ip -f mpls route del 100 as 200 via inet 10.1.1.2 dev swp1
RTNETLINK answers: Invalid argument
$ip -f mpls route del 100
RTNETLINK answers: Invalid argument
After patch:
$ip -f mpls route show
100 as to 200 via inet 10.1.1.2 dev swp1
$ip -f mpls route del 100 as 200 via inet 10.1.1.2 dev swp1
$ip -f mpls route show
Always set type to RTN_UNICAST for mpls route add/deletes.
Also to keep things consistent with kernel set scope to
RT_SCOPE_UNIVERSE for both mpls and ipv6 routes. Both mpls and ipv6 route
deletes ignore scope.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
The command "ip mroute show" is not showing routes when "to" and/or "from"
filter is applied.
root@mazhar:~# ip mroute show
(10.202.30.101, 235.1.2.3) Iif: eth0 Oifs: eth1
But When I applied filter, it does not show anything.
root@mazhar:~# ip mroute show 235.1.2.3 from 10.202.30.101
root@mazhar:~#
Signed-off-by: Mazhar Rana <ranamazharp@gmail.com>
If a tunnel is created with a local address, you can't change it to any.
# ip tunnel add tunl1 mode ipip remote 10.16.42.37 local 10.16.42.214 ttl 64
# ip tunnel show tunl1
tunl1: ip/ip remote 10.16.42.37 local 10.16.42.214 ttl 64
# ip tunnel change tunl1 local any
# echo $?
0
# ip tunnel show tunl1
tunl1: ip/ip remote 10.16.42.37 local 10.16.42.214 ttl 64
It happens that parse_args zeroes ip_tunnel_parm, and when creating the
tunnel, it is OK to leave it as is if the address is any. However, when
changing the tunnel, the current parameters will be read from
ip_tunnel_parm, and local and remote address won't be zeroes anymore, so
it needs to be explicitly set to any.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
Arthur Gautier
Stephen Hemminger
Denis Kirjanov
Toshiaki Makita
Andy Gospodarek
David Ahern
Zhang Shengju
Pavel Šimerda
Nikolay Aleksandrov
Antti Paila
Anuradha Karuppiah
Felix Janda
Jiri Pirko
Roopa Prabhu
Nikolay Aleksandrov
Eran Ben Elisha
John W. Linville
Mazhar Rana
Thadeu Lima de Souza Cascardo