addattr16 may return an error about the nl msg size
but not about incorrect eth type.
Fixes: 488b41d020 ("tc: flower no need to specify the ethertype")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
addattr32 may return an error.
Fixes: cfcabf18d8 ("tc: flower: Add skip_{hw|sw} support")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
This fix a missing use case after the introduction of enum flower_endpoint.
Fixes: 6910d65661 ("tc: flower: introduce enum flower_endpoint")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Said iptables version introduced struct xtables_globals field
'compat_rev', a function pointer. Initializing it is mandatory as
libxtables calls it without existence check.
Without this, tc segfaults when using the xt action like so:
| tc filter add dev d0 parent ffff: u32 match u32 0 0 \
| action xt -j MARK --set-mark 20
Signed-off-by: Phil Sutter <phil@nwl.cc>
Since 41aa17ff46 ("tc/cls_flower: Add dest UDP port to tunnel params")
tc flower supports setting the dest UDP port.
* Use "port_number" to be consistent with other man-page text
* Re-add "enc_dst_port" documentation to manpage which was
accidently removed by b2a1f740aa ("tc: flower: document that *_ip
parameters take a PREFIX as an argument.")
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Enhance flower to support matching on flags.
The 1st flag allows to match on whether the packet is
an IP fragment.
Example:
# add a flower filter that will drop fragmented packets
# (bit 0 of control flags)
tc filter add dev ens4f0 protocol ip parent ffff: \
flower \
src_mac e4:1d:2d:fd:8b:01 \
dst_mac e4:1d:2d:fd:8b:02 \
indev ens4f0 \
matching_flags 0x1/0x1 \
action drop
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
This fixes under musl build issues like:
f_matchall.c: In function ‘matchall_parse_opt’:
f_matchall.c:48:12: error: ‘LONG_MIN’ undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
f_matchall.c:48:12: note: each undeclared identifier is reported only once for each function it appears in
f_matchall.c:48:29: error: ‘LONG_MAX’ undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
tunnel key set parameters includes also dest UDP port, add it to the
usage.
Fixes: 449c709c38 ("tc/m_tunnel_key: Add dest UDP port to tunnel key action")
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
Encapsulation dest UDP port is part of the classifier matching
parameters, add it to the usage.
Fixes: 41aa17ff46 ("tc/cls_flower: Add dest UDP port to tunnel params")
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_mac and dst_mac may now take an optional mask
to limit the scope of matching.
* This address is is documented as a LLADDR in keeping with ip-link(8).
* The formats accepted match those already output when dumping flower
filters from the kernel.
Example of use of LLADDR with and without a mask:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:01:00:00:00/ff:ff:00:00:00:01 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00/23 action drop
tc filter add dev eth0 protocol ip parent ffff: flower indev eth0 \
src_mac 52:54:00:00:00:00 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
* The argument to src_ip, dst_ip, enc_src_ip and enc_dst_ip take an
optional prefix length which is used to provide a mask to limit the scope
of matching.
* This is documented as a PREFIX in keeping with ip-route(8).
Example of uses of IPv4 and IPv6 prefixes
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 dst_ip 192.168.1.1 action drop
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 src_ip 10.0.0.0/8 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 src_ip 2001:DB8:1::/48 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 dst_ip 2001:DB8::1 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Enhance tunnel key action parameters by adding destination UDP port.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Enhance IP tunnel parameters by adding destination UDP port.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Support matching on ICMP type and code.
Example usage:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: flower \
indev eth0 ip_proto icmp type 8 code 0 action drop
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 ip_proto icmpv6 type 128 code 0 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Introduce enum flower_endpoint and use it instead of a bool
as the type for paramatising source and destination.
This is intended to improve read-ability and provide some type
checking of endpoint parameters.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Make use of flower_port_attr_type() safe:
* flower_port_attr_type() may return a valid index into tb[] or -1.
Only access tb[] in the case of the former.
* Do not access null entries in tb[]
Also make usage silent - it is valid for ip_proto to be invalid,
for example if it is not specified as part of the filter.
Fixes: a1fb0d4842 ("tc: flower: Support matching on SCTP ports")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The 'unset' action is optional. It is used to explicitly unset the
metadata created by the tunnel device during decap. If not used, the
metadata will be released automatically by the kernel.
The 'set' operation, will set the metadata with the specified values for
the encap.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0':
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action mirred egress redirect dev vnet0
Signed-off-by: Amir Vadai <amir@vadai.me>
This work moves the bpf loader into the iproute2 library and reworks
the tc specific parts into generic code. It's useful as we can then
more easily support new program types by just having the same ELF
loader backend. Joint work with Thomas Graf. I hacked a rough start
of a test suite to make sure nothing breaks [1] and looks all good.
[1] https://github.com/borkmann/clsact/blob/master/test_bpf.sh
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Support matching on SCTP ports in the same way that matching
on TCP and UDP ports is already supported.
Example usage:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 ip_proto sctp dst_port 80 \
action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Remove left over usage from removal of eth_type argument.
Fixes: 488b41d020 ('tc: flower no need to specify the ethertype')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
So far, only the 'egress' direction was implemented.
Allow specifying 'ingress' as the direction packet appears on the target
interface.
For example, this takes incoming 802.1q frames on veth0 and redirects
them for input on dummy0:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q basic \
action mirred ingress redirect dev dummy0
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Since 5cd1adba79 ("Update to current iptables headers") compilation
of iproute2 broke for systems without iptables-devel package [1].
Reason is that even though we fall back to build m_ipt.c, the include
depends on a xtables-version.h header, which only ships with
iptables-devel. Machines not having this package fail compilation with:
[...]
CC m_ipt.o
In file included from ../include/iptables.h:5:0,
from m_ipt.c:17:
../include/xtables.h:34:29: fatal error: xtables-version.h: No such file or directory
compilation terminated.
../Config:31: recipe for target 'm_ipt.o' failed
make[1]: *** [m_ipt.o] Error 1
The configure script only barks that package xtables was not found in
the pkg-config search path. The generated Config then only contains f.e.
TC_CONFIG_IPSET. In tc's Makefile we thus fall back to adding m_ipt.o
to TCMODULES. m_ipt.c then includes the local include/iptables.h header
copy, which includes the include/xtables.h copy. Latter then includes
xtables-version.h, which only ships with iptables-devel.
One way to resolve this is to skip this whole mess when pkg-config has
no xtables config available. I've carried something along these lines
locally for a while now, but it's just too annyoing. :/ Build works fine
now also when xtables.pc is not available.
[1] http://www.spinics.net/lists/netdev/msg366162.html
Fixes: 5cd1adba79 ("Update to current iptables headers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for controling hardware offload using (now standard)
skip_sw and skip_hw flags in cls_bpf.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
sudo $TC filter add dev $ETH parent ffff: prio 2 protocol ip \
u32 match u32 0 0 flowid 1:1 \
action ok
sudo $TC filter add dev $ETH parent ffff: prio 1 protocol ip \
u32 match ip protocol 1 0xff flowid 1:10 \
action ok
now dump to see all rules..
$TC -s filter ls dev $ETH parent ffff: protocol ip
....
filter pref 1 u32
filter pref 1 u32 fh 801: ht divisor 1
filter pref 1 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10 (rule hit 0 success 0)
match 00010000/00ff0000 at 8 (success 0 )
action order 1: gact action drop
random type none pass val 0
index 6 ref 1 bind 1 installed 4 sec used 4 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter pref 2 u32
filter pref 2 u32 fh 800: ht divisor 1
filter pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 336 success 336)
match 00000000/00000000 at 0 (success 336 )
action order 1: gact action pass
random type none pass val 0
index 5 ref 1 bind 1 installed 38 sec used 4 sec
Action statistics:
Sent 24864 bytes 336 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
..get filter 801::800
$TC -s filter get dev $ETH parent ffff: protocol ip \
handle 801:0:800 prio 2 u32
....
filter parent ffff: protocol ip pref 1 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10 (rule hit 260 success 130)
match 00010000/00ff0000 at 8 (success 130 )
action order 1: gact action drop
random type none pass val 0
index 6 ref 1 bind 1 installed 348 sec used 0 sec
Action statistics:
Sent 11440 bytes 130 pkt (dropped 130, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
..get other one
$TC -s filter get dev $ETH parent ffff: protocol ip \
handle 800:0:800 prio 2 u32
....
filter parent ffff: protocol ip pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 514 success 514)
match 00000000/00000000 at 0 (success 514 )
action order 1: gact action pass
random type none pass val 0
index 5 ref 1 bind 1 installed 506 sec used 4 sec
Action statistics:
Sent 35544 bytes 514 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
..try something that doesnt exist
$TC -s filter get dev $ETH parent ffff: protocol ip handle 800:0:803 prio 2 u32
.....
RTNETLINK answers: No such file or directory
We have an error talking to the kernel
.....
Note, added NLM_F_ECHO is for backward compatibility. old kernels never
before Eric's patch will not respond without it and newer kernels (after Erics patch)
will ignore it.
In old kernels there is a side effect:
In addition to a response to the GET you will receive an event (if you do tc mon).
But this is still better than what it was before (not working at all).
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This action is intended to be an upgrade from a usability perspective
from pedit (as well as operational debugability).
Compare this:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action pedit munge offset -14 u8 set 0x02 \
munge offset -13 u8 set 0x15 \
munge offset -12 u8 set 0x15 \
munge offset -11 u8 set 0x15 \
munge offset -10 u16 set 0x1515 \
pipe
to:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod dmac 02:15:15:15:15:15
Or worse, try to debug a policy with destination mac, source mac and
etherype. Then make that a hundred rules and you'll get my point.
The most important ethernet use case at the moment is when redirecting or
mirroring packets to a remote machine. The dst mac address needs a re-write
so that it doesn't get dropped or confuse an interconnecting (learning) switch
or dropped by a target machine (which looks at the dst mac).
In the future common use cases on pedit can be migrated to this action
(as an example different fields in ip v4/6, transports like tcp/udp/sctp
etc). For this first cut, this allows modifying basic ethernet header.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Stephen Hemminger
Roi Dayan
Phil Sutter
Simon Horman
David Michael
Paul Blakey
Baruch Siach
Hadar Hen Zion
Roman Mashak
Amir Vadai
Daniel Borkmann
Stephen Hemminger
Shmulik Ladkani
Jakub Kicinski
Jamal Hadi Salim
Craig Dillabaugh