Replace the iproute2 snapshot with a version string which is
autogenerated as part of the build process using git describe.
This will also allow seeing if the version of the command
is built from the same sources is as upstream.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
bridge json fdb show is printing an incorrect / non-machine readable
value, when using -j (json output) we are expecting machine readable
data that shouldn't require special handling/parsing.
$ bridge -j fdb show | \
python -c \
'import sys,json;print(json.dumps(json.loads(sys.stdin.read()),indent=4))'
[
{
"master": "br0",
"mac": "56:23:28:4f:4f:e5",
"flags": [],
"ifname": "vx0",
"state": "state=0x80" <<<<<<<<< with the patch: "state": "0x80"
}
]
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In most of cases a user wants to see only the dynamic mac addresses
in the fdb output. But currently the 'fdb show' displays tons of
various self entries, those only waste the output without any useful
goal.
New option 'dynamic' for 'show' and 'get' commands forces display
only relevant records.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'bridge fdb get' has json support but the json object is never initialized
before patch:
$ bridge -j fdb get 56:23:28:4f:4f:e5 dev vx0
56:23:28:4f:4f:e5 dev vx0 master br0 permanent
$
after patch:
$ bridge -j fdb get 56:23:28:4f:4f:e5 dev vx0 | \
python -c \
'import sys,json;print(json.dumps(json.loads(sys.stdin.read()),indent=4))'
[
{
"master": "br0",
"mac": "56:23:28:4f:4f:e5",
"flags": [],
"ifname": "vx0",
"state": "permanent"
}
]
$
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support to assign a nexthop group
id to an fdb entry.
$bridge fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Consider this configuration:
ip link add br0 type bridge
ip link add vx0 type vxlan dstport 4789 external
ip link set dev vx0 master br0
bridge vlan del vid 1 dev vx0
ip link add vx1 type vxlan dstport 4790 external
ip link set dev vx1 master br0
root@vsid:/src/iproute2# ./bridge/bridge vlan
port vlan-id
br0 1 PVID Egress Untagged
vx0 None
vx1 1 PVID Egress Untagged
root@vsid:/src/iproute2#
Note the useless and inconsistent empty lines.
root@vsid:/src/iproute2# ./bridge/bridge vlan tunnelshow
port vlan-id tunnel-id
br0
vx0 None
vx1
What's the difference between "None" and ""?
root@vsid:/src/iproute2# ./bridge/bridge -j -p vlan tunnelshow
[ {
"ifname": "br0",
"tunnels": [ ]
},{
"ifname": "vx1",
"tunnels": [ ]
} ]
Why does vx0 appear in normal output and not json output?
Why output an empty list for br0 and vx1?
Fix these inconsistencies and avoid outputting entries with no values. This
makes the behavior consistent with other iproute2 commands, for example
`ip -6 addr`: if an interface doesn't have any ipv6 addresses, it is not
part of the listing.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 7abf5de677 ("bridge: vlan: add support to display per-vlan statistics")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix singular vs plural. Add a hyphen to clarify that each of those are
single fields.
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
repeats for "vlan tunnelshow" what commit 0f36267485 ("bridge: fix vlan
show formatting") did for "vlan show". This fixes problems in json output.
Note that the resulting json output format of "vlan tunnelshow" is not the
same as the original, introduced in commit 8652eeb3ab ("bridge: vlan:
support for per vlan tunnel info"). Changes similar to the ones done for
"vlan show" in commit 0f36267485 ("bridge: fix vlan show formatting") are
carried over to "vlan tunnelshow".
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Fixes: 0f36267485 ("bridge: fix vlan show formatting")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_vlan() and print_vlan_tunnel() are almost identical copies, save for
a missing newline in the latter which leads to broken output of "vlan
tunnelshow" in normal mode.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit c7c1a1ef51 ("bridge: colorize output and use JSON print
library"), print_range() is used for vid (16bits) and vni. However, the
latter are 32bits so they get truncated. They got truncated even before
that commit though.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As per the kernel's vlan_tunnel_policy, IFLA_BRIDGE_VLAN_TUNNEL_VID and
IFLA_BRIDGE_VLAN_TUNNEL_FLAGS have type NLA_U16.
Fixes: 8652eeb3ab ("bridge: vlan: support for per vlan tunnel info")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support to lookup a bridge fdb entry
using recently added support in the kernel using RTM_GETNEIGH
(and AF_BRIDGE family).
example:
$bridge fdb get 02:02:00:00:00:03 dev test-dummy0 vlan 1002
02:02:00:00:00:03 dev test-dummy0 vlan 1002 master bridge
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While I fixed the mdb json output, I did overlook the text output.
This patch returns the original text output format:
dev <bridge> port <port> grp <mcast group> <temp|permanent> <flags> <timer>
Example (old format, restored by this patch):
dev br0 port eth8 grp 239.1.1.11 temp
Example (changed format after the commit below):
23: br0 eth8 239.1.1.11 temp
We had some reports of failing scripts which were parsing the output.
Also the old format matches the bridge mdb command syntax which makes
it easier to build commands out of the output.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
ip/ip:
add/remove: 0/0 grow/shrink: 5/15 up/down: 103/-4796 (-4693)
Total: Before=672591, After=667898, chg -0.70%
ip/rtmon:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-54 (-54)
Total: Before=48879, After=48825, chg -0.11%
tc/tc:
add/remove: 0/2 grow/shrink: 31/10 up/down: 882/-6133 (-5251)
Total: Before=351912, After=346661, chg -1.49%
bridge/bridge:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-459 (-459)
Total: Before=70502, After=70043, chg -0.65%
misc/lnstat:
add/remove: 0/1 grow/shrink: 1/0 up/down: 48/-486 (-438)
Total: Before=9960, After=9522, chg -4.40%
tipc/tipc:
add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-62 (-44)
Total: Before=79182, After=79138, chg -0.06%
While at it, indent some strings which were starting at column 0,
and use tabs where possible, to have a consistent style across helps.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Each of the commits below broke the vlan stats output in a different
way:
- 45fca4ed94 ("bridge: fix vlan show stats formatting")
Added a second print of an interface name (e.g. eth4eth4)
- c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Broke normal vlan stats output by not printing a new line after them
Also printed interfaces without any vlans when printing stats
This fix is not pretty but it brings back the previous behaviour.
Before this fix:
$ bridge -s vlan show
port vlan id
br0br0 1 PVID Egress Untagged
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets 4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packetseth4eth4 4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packetsroot@debian:~/
After this fix:
$ bridge -s vlan show
port vlan id
br0 1 PVID Egress Untagged
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
eth4 4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
Fixes: 45fca4ed94 ("bridge: fix vlan show stats formatting")
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This adds configuration for the IFLA_BRPORT_MCAST_TO_UCAST flag that
allows multicast packets to be replicated as unicast packets.
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We already print src_vni for a fdb entry when present.
This patch adds the ability to set src_vni on a fdb
entry. When not specified, kernel will use vni specified
on the vxlan device. This can be used on a vxlan fdb entry
when the vxlan device is in external or collect metadata
mode.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While iproute2 correctly uses ifinfomsg struct as the ancillary header
when requesting an FDB dump on old kernels, it sets the message type to
RTM_GETLINK. This results in wrong reply being returned.
Fix this by using RTM_GETNEIGH instead.
Before:
$ bridge fdb show brport dummy0
Not RTM_NEWNEIGH: 00000158 00000010 00000002
After:
$ bridge fdb show brport dummy0
2a:0b:41:1c:92:d3 vlan 1 master br0 permanent
2a:0b:41:1c:92:d3 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 05880354c2 ("bridge: fdb: Fix filtering with strict checking disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: LiLiang <liali@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Older kernels expect an ifinfomsg struct as the ancillary header, and
after kernel commit bd961c9bc664 ("rtnetlink: fix rtnl_fdb_dump() for ndmsg
header") can handle either ifinfomsg or ndmsg. Strict data checking only
allows ndmsg.
Use the new RTNL_HANDLE_F_STRICT_CHK flag to know which header to send.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Add fdb_dump_filter to set filter attributes in dump request
and convert fdb_show to use rtnl_neighdump_req.
Signed-off-by: David Ahern <dsahern@gmail.com>
Since commit aea41afcfd ("ip bridge: Set NETLINK_GET_STRICT_CHK on
socket") iproute2 uses strict checking on kernels that support it. This
causes FDB dumping to fail [1], as iproute2 uses 'struct ifinfomsg'
whereas the kernel expects 'struct ndmsg'.
Note that with this change iproute2 continues to work on old kernels
that do not support strict checking, but contain the fix introduced in
kernel commit bd961c9bc664 ("rtnetlink: fix rtnl_fdb_dump() for ndmsg
header").
[1]
# bridge fdb show
[ 5365.137224] netlink: 4 bytes leftover after parsing attributes in process `bridge'.
Error: bytes leftover after parsing attributes.
Dump terminated
Fixes: aea41afcfd ("ip bridge: Set NETLINK_GET_STRICT_CHK on socket")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
iproute2 has been updated for the new strict policy in the kernel. Add a
helper to call setsockopt to enable the feature. Add a call to ip.c and
bridge.c
The setsockopt fails on older kernels and the error can be safely ignored
- any new fields or attributes are ignored by the older kernel.
Signed-off-by: David Ahern <dsahern@gmail.com>
The argument to print_0xhex is converted to unsigned long long
so the format string give for normal printout has to be some
variant of %llx. Otherwise, bogus values will be printed on
32 bit platforms.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
commit c7c1a1ef51 ("bridge: colorize output and use JSON print library")
broke previous use of -c to represent compressvlans. This restores
previous use of -c to represent compressvlans. Understand the original
motivation to use -c to represent color consistently everywhere but
there are apps and network interface managers out there that are already
using -c to prepresent compressed vlans.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit 4abb8c723a ("bridge: fdb: Fix for missing
keywords in non-JSON output"), I am seeing a double print for dev
in bridge fdb show. eg:
"44:38:39:00:6a:82 dev dev bridge vlan 1 master bridge permanent"
this patch removes the redundant print.
Fixes: 4abb8c723a ("bridge: fdb: Fix for missing keywords in non-JSON output")
CC: Phil Sutter <phil@nwl.cc>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The output of -statistics vlan show was broken previous change for json
output. This aligns the format to vlan show.
v2: fixed too greedy deletion that caused a -Wmaybe-uninitialized
Signed-off-by: Tobias Jungel <tobias.jungel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
While migrating to JSON print library, some keywords were dropped from
standard output by accident. Add them back to unbreak output parsers.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the new backup port option that can be set
on a bridge port. If the port's carrier goes down all of the traffic
gets redirected to the configured backup port. We add the following new
arguments:
$ ip link set dev brport type bridge_slave backup_port brport2
$ ip link set dev brport type bridge_slave nobackup_port
$ bridge link set dev brport backup_port brport2
$ bridge link set dev brport nobackup_port
The man pages are updated respectively.
Also 2 minor style adjustments:
- add missing space to bridge man page's state argument
- use lower starting case for vlan_tunnel in ip-link man page (to be
consistent with the rest)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new sticky flag that can be set on fdbs and update the
man page.
CC: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The bridge mdb show is broken on current iproute2. e.g.
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp 34: br0 veth0_br 224.1.1.1 temp
After fix:
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp
34: br0 veth0_br 224.1.1.1 temp
v2: Use json print lib as Stephen suggested.
v3: No need to use is_json_context() as print_string() could handle both cases.
v4: use new function print_nl() to print new line in non-json mode.
Reported-by: Ying Xu <yinxu@redhat.com>
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The output of vlan show was broken previous change to use json_print.
Clean the code up and return to original format.
Note: the JSON syntax has changed to make the bridge vlan
show more like other outputs (e.g. ip -j li show).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rather than using is_json_context(), use the print_string functions
which handle both cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern
Stephen Hemminger
Julien Fortin
Anton Danilov
Roopa Prabhu
Benjamin Poirier
Bastien Roucariès
David Ahern
Nikolay Aleksandrov
Matteo Croce
Tobias Jungel
Ido Schimmel
Phil Sutter
Hangbin Liu