This patch adds support for the three IOAM encap modes that were introduced:
inline, encap and auto.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Fix rogue "tab after spaces" used for indentation of the documentation.
This causes rendering issues on terminals using a non-standard tab width.
Signed-off-by: Frank Villaro-Dixon <frank.villaro@infomaniak.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since we use the cache netlink socket for each nexthop we can keep it open
instead of opening and closing it on every add call. The socket is opened
once, on the first add call and then reused for the rest.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
the following command:
# ip -j mptcp endpoint show
prints a JSON array that misses the terminating bracket. Fix this calling
delete_json_obj() to balance the call to new_json_obj().
Fixes: 7e0767cd86 ("add support for mptcp netlink interface")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Andrea Claudi <aclaudi@redhat.com>
Add a new helper print_cache_nexthop replacing print_nexthop which can
update the nexthop cache if the process_cache argument is true. It is
used when monitoring netlink messages to keep the nexthop cache up to
date with nexthop changes happening. For the old callers and anyone
who's just dumping nexthops its _nocache version is used which is a
wrapper for print_cache_nexthop.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
If -d (show_details) is used when printing/monitoring routes then print
detailed nexthop information in the field "nh_info". The nexthop is also
cached for future searches.
Output looks like:
unicast 198.51.100.0/24 nhid 103 table 3 proto boot scope global
nh_info id 103 group 101/102 type resilient buckets 512 idle_timer 0 unbalanced_timer 0 unbalanced_time 0 scope global proto unspec
nexthop via 169.254.2.22 dev veth2 weight 1
nexthop via 169.254.3.23 dev veth4 weight 1
The nh_info field has the same format as ip -d nexthop show would've had
for the same nexthop id.
For completeness the JSON version looks like:
{
"type": "unicast",
"dst": "198.51.100.0/24",
"nhid": 103,
"table": "3",
"protocol": "boot",
"scope": "global",
"flags": [ ],
"nh_info": {
"id": 103,
"group": [ {
"id": 101
},{
"id": 102
} ],
"type": "resilient",
"resilient_args": {
"buckets": 512,
"idle_timer": 0,
"unbalanced_timer": 0,
"unbalanced_time": 0
},
"scope": "global",
"protocol": "unspec",
"flags": [ ]
},
"nexthops": [ {
"gateway": "169.254.2.22",
"dev": "veth2",
"weight": 1,
"flags": [ ]
},{
"gateway": "169.254.3.23",
"dev": "veth4",
"weight": 1,
"flags": [ ]
} ]
}
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a helper which looks for a nexthop in the cache and if not found
reads the entry from the kernel and caches it. Finally the entry is
printed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a static nexthop cache in a hash with 1024 buckets and helpers to
manage it (link, unlink, find, add nexthop, del nexthop). Adding new
nexthops is done by creating a new rtnl handle and using it to retrieve
the nexthop so the helper is safe to use while already reading a
response (i.e. using the global rth).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out ipnh_get_id's rtnl talk portion into a separate helper which
will be reused later to retrieve nexthops for caching.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out nexthop entry structure printing from print_nexthop,
effectively splitting it into parse and print parts.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Factor out the nexthop attribute parsing and parse attributes into a
nexthop entry structure which is then used to print.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a structure which describes a nexthop, it will be later used to
parse, print and cache nexthops.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Now that we have resilient group structure split print_nh_res_group into
a parse and print functions, print_nexthop calls the parse function
first to parse the attributes into the structure and then uses the print
function to print the parsed structure.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a structure which describes a resilient nexthop group. It will be
later used for parsing.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Export a new __print_rta_gateway that takes a prepared gateway string to
print which is also used by print_rta_gateway for consistent format.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
We need print_rta_if() to take ifindex directly so later we can use it
with cached converted nexthop objects.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Commit d3432bf10f17 ("net: Support filtering interfaces on no master")
in the kernel added support for filtering interfaces/neighbours that
have no master interface.
This patch completes it and adds this support to iproute2:
1. ip link show nomaster
2. ip address show nomaster
3. ip neighbour {show | flush} nomaster
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Not sure if anyone uses the routel script. The script was
a combination of ip route, shell and awk doing command scraping.
It is now possible to do this much better using the JSON
output formats and python.
Rewriting also fixes the bug where the old script could not parse
the current output format. At the end was getting:
/usr/bin/routel: 48: shift: can't shift that many
The new script also has IPv6 as option.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script is old and limited to IPv4.
Using ip route command directly is better option.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script was from olden days of ifcfg.
I don't see any distribution using it and it is time to put
it out to pasture.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
This script was a one off hack for a special case.
Now that ip commands have better formatting, there is no
real reason for it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
When creating a tap with multi_queue flag, this flag is not displayed
when dumping:
$ ip tuntap add tap23 mode tap multi_queue
$ ip tuntap
tap23: tap persist0x100
While at it, add a space between known flags and hexdump of unknown
ones.
Fixes: c41e038f48 ("iptuntap: allow creation of multi-queue tun/tap device")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Iproute2 has not supported DECnet or IPX since version 5.0.
There were some leftover support in the ip options flags
and parsing, remove these.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
lacp_active specifies whether to send LACPDU frames periodically.
If set on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
v2: use strcmp instead of match for new options.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Presently, if a Geneve or VXLAN interface was created with 'external',
it's not possible for a user to determine e.g. the value of 'dstport'
after creation. This change fixes that by avoiding early returns.
This change partly reverts commit 00ff4b8e31 ("ip/tunnel: Be consistent
when printing tunnel collect metadata").
Signed-off-by: Ilya Dmitrichenko <errordeveloper@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch addresses Stephen's comment:
"""
> + print_null(PRINT_ANY, "", "\n", NULL);
Use print_nl() since it handles the case of oneline output.
Plus in JSON the newline is meaningless.
"""
It also removes two useless print_null's.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides support for adding, listing and removing IOAM namespaces
and schemas with iproute2. When adding an IOAM namespace, both "data" (=u32)
and "wide" (=u64) are optional. Therefore, you can either have none, one of
them, or both at the same time. When adding an IOAM schema, there is no
restriction on "DATA" except its size (see IOAM6_MAX_SCHEMA_DATA_LEN). By
default, an IOAM namespace has no active IOAM schema (meaning an IOAM namespace
is not linked to an IOAM schema), and an IOAM schema is not considered
as "active" (meaning an IOAM schema is not linked to an IOAM namespace). It is
possible to link an IOAM namespace with an IOAM schema, thanks to the last
command below (meaning the IOAM schema will be considered as "active" for the
specific IOAM namespace).
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Make use of the already available brief flag and print the basic details of
the IPv4 or IPv6 neighbour cache in a tabular format for better readability
when the brief output is expected.
$ ip -br neigh
172.16.12.100 bridge0 b0:fc:36:2f:07:43
172.16.12.174 bridge0 8c:16:45:2f:bc:1c
172.16.12.250 bridge0 04:d9:f5:c1:0c:74
fe80::267b:9f70:745e:d54d bridge0 b0:fc:36:2f:07:43
fd16:a115:6a62:0:8744:efa1:9933:2c4c bridge0 8c:16:45:2f:bc:1c
fe80::6d9:f5ff:fec1:c74 bridge0 04:d9:f5:c1:0c:74
And add "ip neigh show" to the list of ip sub commands mentioned in the man
page that support the brief output in tabular format.
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for mcast_vlan_snooping option which controls per-vlan
multicast snooping, also update the man page.
Syntax: $ ip link set dev bridge type bridge mcast_vlan_snooping 0/1
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add arp_validate filter support based on kernel commit 896149ff1b2c
("bonding: extend arp_validate to be able to receive unvalidated arp-only traffic")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
lacp_active specifies whether to send LACPDU frames periodically.
If set on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
v2: use strcmp instead of match for new options.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Presently, if a Geneve or VXLAN interface was created with 'external',
it's not possible for a user to determine e.g. the value of 'dstport'
after creation. This change fixes that by avoiding early returns.
This change partly reverts commit 00ff4b8e31 ("ip/tunnel: Be consistent
when printing tunnel collect metadata").
Signed-off-by: Ilya Dmitrichenko <errordeveloper@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch addresses Stephen's comment:
"""
> + print_null(PRINT_ANY, "", "\n", NULL);
Use print_nl() since it handles the case of oneline output.
Plus in JSON the newline is meaningless.
"""
It also removes two useless print_null's.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides support for adding, listing and removing IOAM namespaces
and schemas with iproute2. When adding an IOAM namespace, both "data" (=u32)
and "wide" (=u64) are optional. Therefore, you can either have none, one of
them, or both at the same time. When adding an IOAM schema, there is no
restriction on "DATA" except its size (see IOAM6_MAX_SCHEMA_DATA_LEN). By
default, an IOAM namespace has no active IOAM schema (meaning an IOAM namespace
is not linked to an IOAM schema), and an IOAM schema is not considered
as "active" (meaning an IOAM schema is not linked to an IOAM namespace). It is
possible to link an IOAM namespace with an IOAM schema, thanks to the last
command below (meaning the IOAM schema will be considered as "active" for the
specific IOAM namespace).
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
Make use of the already available brief flag and print the basic details of
the IPv4 or IPv6 neighbour cache in a tabular format for better readability
when the brief output is expected.
$ ip -br neigh
172.16.12.100 bridge0 b0:fc:36:2f:07:43
172.16.12.174 bridge0 8c:16:45:2f:bc:1c
172.16.12.250 bridge0 04:d9:f5:c1:0c:74
fe80::267b:9f70:745e:d54d bridge0 b0:fc:36:2f:07:43
fd16:a115:6a62:0:8744:efa1:9933:2c4c bridge0 8c:16:45:2f:bc:1c
fe80::6d9:f5ff:fec1:c74 bridge0 04:d9:f5:c1:0c:74
And add "ip neigh show" to the list of ip sub commands mentioned in the man
page that support the brief output in tabular format.
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
We started to use in-kernel filtering feature which allows to get only
needed tables (see iproute_dump_filter()). From the kernel side it's
implemented in net/ipv4/fib_frontend.c (inet_dump_fib), net/ipv6/ip6_fib.c
(inet6_dump_fib). The problem here is that behaviour of "ip route save"
was changed after
c7e6371bc ("ip route: Add protocol, table id and device to dump request").
If filters are used, then kernel returns ENOENT error if requested table
is absent, but in newly created net namespace even RT_TABLE_MAIN table
doesn't exist. It is really allocated, for instance, after issuing
"ip l set lo up".
Reproducer is fairly simple:
$ unshare -n ip route save > dump
Error: ipv4: FIB table does not exist.
Dump terminated
Expected result here is to get empty dump file (as it was before this
change).
v2: reworked, so, now it takes into account NLMSGERR_ATTR_MSG
(see nl_dump_ext_ack_done() function). We want to suppress error messages
in stderr about absent FIB table from kernel too.
v3: reworked to make code clearer. Introduced rtnl_suppressed_errors(),
rtnl_suppress_error() helpers. User may suppress up to 3 errors (may be
easily extended by changing SUPPRESS_ERRORS_INIT macro).
v4: reworked, rtnl_dump_filter_errhndlr() was introduced. Thanks
to Stephen Hemminger for comments and suggestions
v5: space fixes, commit message reformat, empty initializers
Fixes: c7e6371bc ("ip route: Add protocol, table id and device to dump request")
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The WWAN subsystem has been extended to generalize the per data channel
network interfaces management. This change implements support for WWAN
links handling. And actively uses the earlier introduced ip-link
capability to specify the parent by its device name.
The WWAN interface for a new data channel should be created with a
command like this:
ip link add dev wwan0-2 parentdev wwan0 type wwan linkid 2
Where: wwan0 is the modem HW device name (should be taken from
/sys/class/wwan) and linkid is an identifier of the opened data
channel.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add support for specifying a parent device (struct device) by its name
during the link creation and printing parent name in the links list.
This option will be used to create WWAN links and possibly by other
device classes that do not have a "natural parent netdev".
Add the parent device bus name printing for links list info
completeness. But do not add a corresponding command line argument, as
we do not have a use case for this attribute.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
We introduce the new "End.DT46" action for supporting the SRv6 End.DT46
Behavior in iproute2.
The SRv6 End.DT46 Behavior, defined in RFC 8986 [1] section 4.8, can be
used to implement L3 VPNs based on Segment Routing over IPv6 networks in
multi-tenants environments and it is capable of handling both IPv4 and
IPv6 tenant traffic at the same time.
The SRv6 End.DT46 Behavior decapsulates the received packets and it
performs the IPv4 or IPv6 routing lookup in the routing table of the
tenant.
As for the End.DT4 and for the End.DT6 in VRF mode, the SRv6 End.DT46
Behavior leverages a VRF device in order to force the routing lookup into
the associated routing table using the "vrftable" attribute.
To make the End.DT46 work properly, it must be guaranteed that the
routing table used for routing lookup operations is bound to one and
only one VRF during the tunnel creation. Such constraint has to be
enforced by enabling the VRF strict_mode sysctl parameter, i.e.:
$ sysctl -wq net.vrf.strict_mode=1
Note that the same approach is used for the End.DT4 Behavior and for the
End.DT6 Behavior in VRF mode.
An SRv6 End.DT46 Behavior instance can be created as follows:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100
Standard Output:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100 metric 1024 pref medium
JSON Output:
$ ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6local",
"action": "End.DT46",
"vrftable": 100,
"dev": "vrf100",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
This patch updates the route.8 man page and the ip route help with the
information related to End.DT46.
Considering that the same information was missing for the SRv6 End.DT4 and
the End.DT6 Behaviors, we have also added it.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
We introduce the "count" optional attribute for supporting counters in SRv6
Behaviors as defined in [1], section 6. For each SRv6 Behavior instance,
counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, we introduce a new counter that counts the number of packets
that have NOT been properly processed (i.e. errors) by an SRv6 Behavior
instance.
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters specifing the "count" attribute as follows:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
v2:
- add help and route.8 man page updates
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
When add address with port, it is mean to send an ADD_ADDR to remote,
so it must have flag signal set.
Fixes: 42fbca91cd ("mptcp: add support for port based endpoint")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.
This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.
Signed-off-by: Jethro Beekman <kernel@jbeekman.nl>
Signed-off-by: David Ahern <dsahern@kernel.org>
David Ahern
Justin Iurman
Frank Villaro-Dixon
Nikolay Aleksandrov
Davide Caratti
Lahav Schlesinger
Stephen Hemminger
David Marchand
Hangbin Liu
Ilya Dmitrichenko
Gokul Sivakumar
Alexander Mikhalitsyn
Sergey Ryazanov
Paolo Lungaroni
Jakub Kicinski
Jianguo Wu
Jethro Beekman