Adding new tunnel key fields would cause the usage line overflow 80 chars.
Make the usage text similar to other commands.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
In case default control action parsing takes place, it is ok to miss.
So don't print error message.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Jiri Benc <jbenc@redhat.com>
parse_action_control helper does advancing of the arg inside. So don't
do it outside.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Allow users to set flower classifier filter rules which
include matches for ip tos and ttl.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
This happens with NAT targets, such as SNAT, DNAT and MASQUERADE. These
are still not usable with this patch, but at least tc doesn't crash
anymore when one tries to use them.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Each tc action is terminated by a control action. Each action parses and
prints then intividually. Introduce set of helpers and allow to share
this code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Fixes
| tc_core.c:190:29: error: 'UINT16_MAX' undeclared (first use in this function); did you mean '__INT16_MAX__'?
| if ((sz >> s->size_log) > UINT16_MAX) {
| ^~~~~~~~~~
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Do not allow using eth and udp header types if non-extended pedit kABI
is being used. Other protocol parsers already have this check.
Signed-off-by: Amir Vadai <amir@vadai.me>
Currently there is no way of querying whether a filter is
offloaded to HW or not when using "both" policy (where none
of skip_sw or skip_hw flags are set by user-space).
Add two new flags, "in hw" and "not in hw" such that user
space can determine if a filter is actually offloaded to
hw or not. The "in hw" UAPI semantics was chosen so it's
similar to the "skip hw" flag logic.
If none of these two flags are set, this signals running
over older kernel.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
For example, forward udp traffic destined to port 999 to veth0 and set
tcp port to 888:
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto udp \
dst_port 999 \
action pedit ex munge \
udp dport set 888 \
action mirred egress \
redirect dev veth0
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Amir Vadai <amir@vadai.me>
For example, forward tcp traffic destined to port 80 to veth0 and set
tcp port to 8080:
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto tcp \
dst_port 80 \
action pedit ex munge \
tcp dport set 8080 \
action mirred egress \
redirect dev veth0
Signed-off-by: Amir Vadai <amir@vadai.me>
For example, forward tcp traffic to veth0 and set
destination mac address to 11:22:33:44:55:66 :
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto tcp \
action pedit ex munge \
eth dst set 11:22:33:44:55:66 \
action mirred egress \
redirect dev veth0
Signed-off-by: Amir Vadai <amir@vadai.me>
Make parse_val() accept fields up to 128 bits long, this should be
enough for current use cases and involves a minimal change to code.
Signed-off-by: Amir Vadai <amir@vadai.me>
Enable user to edit IP header ttl field.
For example, to forward any TCP packet and decrease its TTL by one:
$ tc filter add dev enp0s9 protocol ip parent ffff: \
flower \
ip_proto tcp \
action pedit ex munge \
ip ttl add 0xff pipe \
action mirred egress \
redirect dev veth0
Signed-off-by: Amir Vadai <amir@vadai.me>
Utilize the extended pedit netlink to set an offset relative to a
specific header type. Old netlink only enabled the user to set
approximated offset relative to the IPv4 header.
To use this extended functionality need to use the 'ex' keyword after
'pedit' and before any 'munge'.
e.g:
$ tc filter add dev ens9 protocol ip parent ffff: \
flower \
ip_proto udp \
dst_port 80 \
action pedit ex munge \
ip dst set 1.1.1.1 \
pipe \
action mirred egress redirect dev veth0
Signed-off-by: Amir Vadai <amir@vadai.me>
Make use of 128b user cookies
Introduce optional 128-bit action cookie.
Like all other cookie schemes in the networking world (eg in protocols
like http or existing kernel fib protocol field, etc) the idea is to
save user state that when retrieved serves as a correlator. The kernel
_should not_ intepret it. The user can store whatever they wish in the
128 bits.
Sample exercise(showing variable length use of cookie)
.. create an accept action with cookie a1b2c3d4
sudo $TC actions add action ok index 1 cookie a1b2c3d4
.. dump all gact actions..
sudo $TC -s actions ls action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 0 installed 5 sec used 5 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie a1b2c3d4
.. bind the accept action to a filter..
sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 1
... send some traffic..
$ ping 127.0.0.1 -c 3
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.020 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.027 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Support the new TCA_DUMP_INVISIBLE netlink attribute that allows asking
kernel to perform 'full qdisc dump', as for historical reasons some of the
default qdiscs are being hidden by the kernel.
The command syntax is being extended by voluntary 'invisible' argument to
'tc qdisc show'.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When built with GCC warnings enabled:
q_pie.c: In function ‘pie_parse_opt’:
q_pie.c:78:38: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(alpha > ALPHA_MAX) || (alpha < ALPHA_MIN)) {
^
q_pie.c:85:35: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(beta > BETA_MAX) || (beta < BETA_MIN)) {
^
This is because MIN is 0 and unsigned number can never be less than 0.
Therefore just remove the _MIN values.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rebuilding libnetlink doesn't trigger rebuild of tc, which is wrong
(especially so for builds where libnetlink.a gets statically linked into
tc). Fix that by introducing an explicit dependency.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the new helper functions rta_getattr_u* instead of direct
cast of RTA_DATA(). Where RTA_DATA() is a structure, then remove
the unnecessary cast since RTA_DATA() is void *
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We already export TCA_BPF_TAG resp. TCA_ACT_BPF_TAG from kernel commit
f1f7714ea51c ("bpf: rework prog_digest into prog_tag"), thus also dump
it when filter/actions are shown.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix order of arguments when passed to __flower_parse_ip_addr.
Fixes: ("f888f4e20534 tc: flower: Support matching ARP")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Extend ICMP code and type match to support masks.
Also add missing documentation to synopsis in manpage.
tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 ip_proto icmpv6 type 128/240 code 0 action drop
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Provide generic masked u8 print helper and use it to print arp operations.
Also:
* Make name parameter of arp op print helper const.
* Consistently use __u8 rather than uint8_t, in keeping with the
pervasive style in the file.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Provide generic masked u8 paser helper and use it to parse arp operations.
Also consistently use __u8 rather than uint8_t, in keeping with the
pervasive style in the file.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Print the skip flags when we dump a filter.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Unlike other PREFIXes documented in the usage for tc flower, which accept
both IPv4 and IPv6 prefixes, arp_sip and arp_tip only accepts IPv4
prefixes.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Use enum flower_icmp_field rather than bool as type of third parameter
when calling flower_icmp_attr_type.
Fixes: eb3b5696f1 ("tc: flower: support matching on ICMP type and code")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
The sample tc action allows sampling packets matching a classifier. It
peeks randomly packets, and samples them using the psample netlink
channel. The user can specify the psample group, which the packet will be
sampled to, the sampling rate and the packet truncation (to save
kernel-user traffic).
The sampled packets contain informative metadata, for example, the input
interface and the original packet length.
The action syntax:
tc filter add [...] \
action sample rate <RATE> group <GROUP> [trunc <SIZE>]
[...]
Where:
RATE := The sampling rate which is the ratio of packets observed at the
data source to the samples generated
GROUP := the psample module sampling group
SIZE := optional truncation size
An example for a common usecase of the sample tc action: to sample ingress
traffic from interface eth1, one may use the commands:
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff: \
matchall action sample rate 12 group 4
Where the first command adds an ingress qdisc and the second starts
sampling randomly with an average of one sampled packet per 12 packets
on dev eth1 to psample group 4.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>