Add support for ignore route attribute, and refine the code to use
rta_getattr_* function to get attribute value.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
To not make the output overly confusing, list them in a definition of
the STATE placeholder which is already used in the show/flush syntax but
wasn't explained before.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a bit pedantic, but brackets ([]) show optional values and since
TYPE must not become empty, they're not suited to surround the type
keyword choices. Use curly braces instead.
Also add some missing whitespace to the parameter list above.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Neither 'list' nor 'flush' actions accept parameters, and with given
prefix the action keyword is not optional anymore.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Although the ip command accepts both "neighbor" and "neighbour" as
subcommand, I assume it's sufficient to list it in help text as just
"neigh" like ip.8 does.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The help text was misleading: One could think it is possible to list
rules by selector, which would be nice but isn't. This change also
clarifies that 'ip rule' defaults to 'list' if no further arguments are
given.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.
To trust VF.
# ip link set dev eth0 vf 1 trust on
To untrust VF.
# ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Add support to be able to view and change IFLA_BRPORT_MULTICAST_ROUTER port
attribute.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Export all the read-only values that get returned about a bridge port
such as the timers, the ids, designated_port and cost,
topology_change_ack and config_pending. For the bridge ids the
br_dump_bridge_id function is exported from iplink_bridge.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
netns_map_add() does a malloc of (sizeof (struct nsid_cache) +
strlen(name)) and then proceed with strcpy() of name into the
zero-length member at the end of the nsid_cache structure. The
nul-terminator is written outside of the allocated memory and may
overwrite the allocator's internal structure.
This can trigger a segmentation fault on i386 uclibc with names of size 8:
after the corruption occurs, the call to closedir() on netns_map_init()
crashes while freeing the DIR structure.
Here is the relevant valgrind output:
==1251== Memcheck, a memory error detector
==1251== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==1251== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright
info
==1251== Command: ./ip netns
==1251==
==1251== Invalid write of size 1
==1251== at 0x4011975: strcpy (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1251== by 0x8058B00: netns_map_add (ipnetns.c:181)
==1251== by 0x8058E2A: netns_map_init (ipnetns.c:226)
==1251== by 0x8058E79: do_netns (ipnetns.c:776)
==1251== by 0x804D9FF: do_cmd (ip.c:110)
==1251== by 0x804D814: main (ip.c:300)
Support for the new rx_nohandler statistic.
This code is designed to handle the case where the kernel reported statistic
structure is smaller than the larger structure in later releases (and vice versa).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support to add mpls multipath
routes.
example:
ip -f mpls route add 100 \
nexthop as 200 via inet 10.1.1.2 dev swp1 \
nexthop as 700 via inet 10.1.1.6 dev swp2
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
It seems that I've made a mistake when I exported these, instead of a
space in the end I've put a newline character which is wrong and breaks
the single line output.
Fixes: 7d6bc3b87a ("bonding: export 3ad actor and partner port state")
Reported-by: Sam Tannous <stannous@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_NF_CALL_(IP|IP6|ARP)TABLES
attributes in iproute2 so it can change their values.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_INTVL
attribute in iproute2 so it can change the startup query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
attribute in iproute2 so it can change the query response interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_INTVL attribute
in iproute2 so it can change the query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER_INTVL
attribute in iproute2 so it can change the querier interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_MEMBERSHIP_INTVL
attribute in iproute2 so it can change the membership interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_INTVL
attribute in iproute2 so it can change the last member interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_CNT
attribute in iproute2 so it can change the startup query count.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_CNT
attribute in iproute2 so it can change the last member count value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_HASH_MAX attribute
in iproute2 so it can change the maximum hashed entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_HASH_ELASTICTITY
attribute in iproute2 so it can change the hash elasticity value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER attribute
in iproute2 so it can toggle the mcast querier value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_USE_IFADDR
attribute in iproute2 so it can toggle the multicast_query_use_ifaddr val.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
in iproute2 so it can change the multicast snooping value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_ROUTER attribute
in iproute2 so it can change the multicast router value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_VLAN_DEFAULT_PVID
attribute in iproute2 so it can change the default pvid.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_GROUP_ADDR attribute
in iproute2 so it can change the group address.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_GROUP_FWD_MASK attribute
in iproute2 so it can change the group forwarding mask.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Netlink already provides hello_timer, tcn_timer, topology_change_timer
and gc_timer, so let's make them visible.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Zhang Shengju
Stephen Hemminger
Phil Sutter
Hiroshi Shimamoto
Nikolay Aleksandrov
David Ahern
Nicolas Cavallari
Roopa Prabhu